
Model IP100/200 Series
by
Water Analytics
Aqua
Metrix
by
Metrix
Water Analytics
Impeller Flow Sensor
Features
• Low-friction, long-life jewel bearings
• Single moving part
• Six bladed impeller
• Fully eld-repairable
• Choice of stainless steel or brass
• Integrated Tee and sensor
• Fits 1/2” to 8” pipe sizes
• Fixed depth in tting ensures proper
placement in pipe
• High level signal can be sent up to
2000 feet
• Each tting individually calibrated
and marked with K-factor (Pulses per
Gallon)
Description
The IP100/200 series are adjustable depth insertion paddle-wheels
that come in brass or 316 stainless models to t 3” to 48” pipe.
Installation ttings are standard 1-1/2” (101/201) NPT. Fittings such
as saddles and weldolets may be purchased either locally or from
AquaMetrix.
Ruby bearings and a non-drag Hall-effect sensor give these meters
the widest ow range of any of the paddle-wheel types. A sensor
detects the passage of miniature magnets in the six rotor blades.
The resulting square-wave signal can be sent for hundreds of feet
over unshielded cable without a transmitter and connected directly
to many PLC’s and other controls without any additional electronics.
The Shark-120/240 controller or SharkTX/P transmitter (loop powered) models provides digital rate and total display, as well as single
or dual 4 to 20 mA analog output.
Applications
• Wastewater ow
• Water Treatment systems
• Irrigation
• Groundwater remediation
• Chemical Mixing
• Process cooling systems
• Neutralizaton Systems
• Process ow control
• Filtration systems
100 School Street
Andover, MA 01810
978-749-9949
www.WaterAnalytics.net

Model IP100 Series Impeller Flow Sensors Technical Data
Technical Data
Sensor
Hall Effect 12 VDC current sinking pulse
Materials
Sensor
Sensor Body Brass, or 316 SS
Housing Cast aluminum
Rotor PVDF
Shaft Nickel-bonded tungsten carbide
(Zirconia ceramic optional)
Bearings Ruby jewel
O-Ring EPDM (Viton optional)
Pipe Size
IP101 3” to 10” (75 to 250 mm)
IP201 10” to 48” (250 to 1200 mm)
Max. Pressure 200 PSI (14 bar)
Max. Temperature 200ºF (93ºC)
Flow Rate 0.3 to 30 FPS (0.1 to 9 M/s)
Accuracy 1-1/2% of full scale
Insertion Force 0.44 X pressure in pipe
Power 5-24 Vdc, 1.5 mA
Max. Current 20 mA
Cable #22 AWG 3-con, 18 ft. (6m)
Max. Cable 2000 ft (650 m)
Flow Range (GPM)
Pipe Size Min. Flow Max. Flow
3 7 700
4 12 1100
6 30 2500
8 50 4500
10 75 7000
12 100 10,000
16 175 16,000
18 225 22.000
24 400 35,000
30 640 64,000
36 900 90,000
48 1600 160,000
Dimensons
Ordering Information
Sensor Mounting
Insertion style with MNPT connection
(3” - 10”)
Insertion style with MNPT connection
(10” - 48”)
Sensor Material
Stainless Steel
Brass
Mounting Fitting (Iron only)
3” Saddle tting (Iron)
4” Saddle tting (Iron)
4” Saddle tting (Bronze)
6” Saddle tting (Iron)
8” Saddle tting (Iron)
10” Saddle tting (Iron)
12” Saddle tting (Iron)
14” Saddle tting (Iron)
16” Saddle tting (Iron)
18” Saddle tting (Iron)
20” Saddle tting (Iron)
24” Saddle tting (Iron)
101
201
S
B
300
400
400B
600
800
1000
1200
1400
1600
1800
2000
2400
www.WaterAnalytics.net 978-749-9949