Aquametrix AS Conductivity Sensors User Manual
Aquametrix Model AS
Water Analytics
Aqua
by
Water Analytics
Aqua
Metrix
Conductivity Sensors
Features
Description
For years the MS series of epoxy body probes have been known
as the most extensive conductivity probes on the market. The
new AS series represent a major upgrade.
The AS conductivity probes feature a choice of 316 stainless
steel or graphite electrodes and Noryl shells that will satisfy just
about any industrial, power plant or laboratory application. This
technology, insures that, with reasonable maintenance, years of
drift-free performance can be expected.
Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All types
are designed with a safety stop shoulder on the cell.
Integral automatic temperature compensation is standard
on all types and provides compensation to 25°C when used
with a compatible analyzer. Users can choose between a
1000 Ω RTD or 3 kΩ thernistor. Either elementi is place
to give close thermal contact with the liquid being measured to assure fast response to changing temperature.
Flow-through mounting incorporates a special compression tting which allows adjustable insertion length in 3/4 inch NPT
piping or in the side of a tank. This design avoids the nuisance
of disconnecting the cell cable when installing or removing the
cell for cleaning.
Submersion mounting is achieved by reversing the direction of
the compression tting, allowing the cell to be threaded into the
MHMSC mounting hardware. Mounting hardware is available
which includes a 2 foot length of CPVC pipe and a simple but
versatile adjustable bracket for hanging on the rim of the tank.
Ball Valve (“Hot-Tap”) types permit removal of the cell from process piping or from tanks without shutting down the system.
They are available with in CPVC.
• 316 SS or graphite Electrodes
• Economically Priced
• Automatic Temperature Com-
pensation
• Adjustable Insertion Length
• Ball Valve “Hot Tap” Types
• Constants 0.01, 0.1, 0.5, 1.0, 10
and 50.
• Choice of 3 kΩ thermistor or
1000 Ω RTD for automatic temperature compensation.
Applications
• Cooling towers
• High purity water applications
• Pharmaceutical Applications
• Reverse osmosis systems
• Food and Beverage
by
Andover, MA 01810
Toll free - 855-747-7623
www.WaterAnalytics.net
Metrix
100 School Street
978-749-9949
Model AS Conductivity Cells
Technical Data
Cell Constants 0.01, 0.1, 0.5, 1.0, 10 and 50
Thread size 3/4” NPT
Temperature Compensation* Automatic, 0 to 1050C
Cable Length 20 ft. (6.1 m)
Inser tion Length Variable. See table below
Wetted Materials 316 stainless steel, polypropylene,
Epoxy and EPDM. Compression
tting: CPVC or 316 stainless steel.
Temperature and Pressure
Type Max pres. (psi) Max temp. (0C)
P 50 60
100 50
150 20
S 200 105
Safety Feature Shoulder on cells provides
Temperature and Pressure 3 metres (10 ft.) coaxial, terminated
an integral safety stop
with a spade lug for active electrode,
other wires tinned
316 stainless steel, polypropylene,
epoxy and EP
Dimensions
Related Products
MS Series of probes
MHMSC, 24 inch (610 mm) long 1” CPVC pipe w/ cable clamp
MS-HTC, 3/4” socket-weld CPVC ball valve assembly
AM3422, AM3444 and AM3455 316 SS body conductivity sensors
Ordering Information
Temperature Compensa-
Cell Constant Selection
Constant Code
0.01 001
0.1 01
0.5 05
1.0 1
10 10
tion Device Selection
Description Code
PT1000 RTD 1
3 kΩ ohm NTC 2
Cell with 316 stainless steel tting S
Cell for Ball Valve Assembly HT
www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)
Type Selection
Description Code
Cell with PVC tting P
Loading...