APW Wyott PICA70-32INS-A Specifications

Options & Accessories

• Door hinging

• Corner bumpers

• Perimeter bumper

• Cord Guide/Protector

• Drip Trough

Warranty & Cerifications

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

PROOFING CABINET

Insulated

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Design Features

• "Cast-in" humidity system prevents element
burnout from water spills and potential
injury from accidental contact with exposed
heating element

• Self-draining feature collects excess
moisture into a standard 18” x 26” bun
pan (not included) below the base of the
cabinet

• Removable heating module with separate
controls for heat and humidity

• Maintains uniform temperature and
humidity throughout cabinet

• Temperature adjustable from 60°F(15.6°C)
to 120°F (48.9°C)

• Extruded universal pan supports accept a
variety of pans and screens

Quality Construction

• Aluminum exterior and interior

• 1 1/2" thick fiberglass insulation throughout
top, sides and back

• Dutch Lexan® doors with heavy-duty
hinges, positive closing latch and perimeter
gasket

• Completely removable interior components
for quick and easy cleaning

• Heavy-duty plate-type casters with 5" hard
neoprene wheels, front two with brakes

Model:  PICA70-32INS-A

Heating Module and Controls:

• Bottom mounted heating unit with a one (1) piece
modular drop-in design blower assembly

• Entire bottom mounted heating unit is easily
removable for cleaning and maintenance

• Air heating element rated at 1000W, 120V

• Humidity heating element rated at 400W, 120V

• 5 quart (4.7 liter) cast water reservoir

• Lexan® water reservoir cover

• Easy to operate controls feature precision thermostat,
variable humidity control and dial thermometer

• All controls are visible and operable from exterior of
cabinet

Casters:

• Heavy-duty plate type casters, with 5" hard neoprene
wheels; all swivel; wheel brakes on front two casters

Shipping:

• Freight Class: 85

• FOB: Cheyenne, WY 82007

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

PROOFING CABINET

Insulated

Construction:

• Body: .063 aluminum

• Doors: Clear Lexan® with an extruded aluminum
frame

• Door Latch and Hinges: Patented positive action door
latch with heavy-duty stainless steel hinges

• Door Gasket

: Closed cell foam

• Base

: .125 aluminum

• Rear (Air Duct) Panel: .063 aluminum

• Insulation: Fully insulated back, sides and top with

1.5" fiberglass insulation (5.7 R-Factor and minimum
rating of .26K per inch)

Pan Support Assembly:

• Pan Supports: Extruded universal pan supports
adjustable on 3" centers

• Uprights: .100 aluminum slotted on 3" centers

Electrical:

• 120V, 15A, 1PH service

• Optional 208/240V-15A, 1PH service

• Switch: 15 Amp, lighted

• Cord and Plug: 8' cord with 15A molded plug (NEMA
5-15P); 208/240V models provided with cord only

151.4 cm

Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances

Standard 120 1400 13 15A Dedicated Circuit 1 50/60 Zero Clearance Cabinet
Optional 208/240 1400 6.5 15A Dedicated Circuit 1 50/60 Zero Clearance Cabinet

*Adjustable on 3” centers **Also accommodates 19” x 19” and 23” x 23” screens

Model

Capacity Dimensions

Ship Wt. Act. Wt.

18x26 12x20 SPC’G* H W D

PICA70-32INS-A 16** 32 3” 72”

(182.9 cm)

31”

(78.7 cm)

35”

(88.9 cm)

275 lbs

(124.7 cm)

250 lbs

(113.4 kg)

4/20/05

#B202

Model:  PICA70-32INS-A

D

W

H

59.625 in