APW Wyott HFW-AT-5D User Manual

R

INSTALLATION

AND

OPERATING

INSTRUCTIONS

Model HFW-AT-3 Shown

Models: thruHFW-AT-2 6 & HFW-AT-2D 6Dthru

Hot Food Well w/Bottom Mounted Control

INTENDED FOR OTHER THAN HOUSEHOLD USE

RETAIN THIS MANUAL FOR FUTURE REFERENCE

TOASTER MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

WARNING: Improper installation, adjustment, alteration, service or maintenance can
cause property damage, injury or death. Read the Installation, Operating and
Maintenance Instructions thoroughly before installing or servicing this equipment.

Initial heating of appliance may generate smoke or fumes and must be done in a well ventilated area.
Overexposure to smoke or fumes may cause nausea or dizziness.

This equipment has been engineered to provide you with year-round dependable service when used
according to the instructions in this manual and standard commercial kitchen practices.

P/N 67208 9/05

Phone:
Fax: [phone]
Toll Free: [phone]
Website: www.apwwyott.com
E-mail: [e-mail]

[phone]

APW WYOTT

729 Third Avenue

Dallas, TX 75226

!!

!!

1

IMMEDIATELYINSPECT FOR SHIPPING DAMAGE

All containers should be examined for damage before and during unloading. The freight carrier has
assumed responsibility for its safe transit and delivery. If equipment is received damaged, either apparent
or concealed, a claim must be made with the delivering carrier.

A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then

be signed by the carrier representative (Driver). If this is not done, the carrier may refuse the
claim. The carriercan supply the necessary forms.

B) Concealed damage or loss if not apparent until after equipment is uncrated, a request for

inspection must be made to the carrier within 15 days. The carrier should arrange an
inspection. Be certain to holdall contents and packaging material.

Installation and start-up should be performed by a qualified installer who thoroughly read, understands and
follows these instructions.

APW Wyott takes pride in the design and quality of our products. When used as intended and with proper
care and maintenance, you will experience years of reliable operation from this equipment. To ensure best
results, it isimportant that you read and follow the instructions in this manual carefully.
Installation and start-up should be performed by a qualified installer who thoroughly read, understands and
follows these instruction.
If you have questions concerning the installation, operation, maintenance or service of this product, write
Technical Service Department APW Wyott Foodservice Equipment Company, 729 Third Avenue, Dallas,
TX 75226.

SAFETY PRECAUTIONS

Before installing and operating this equipment be sure everyone involved in its operation are fully trained
and are aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules
and precautions.

The following words and symbols, found in this manual, alert you to hazards to the operator, service
personnel or the equipment. The wordsare defined as follows:

DANGER:

!

WARNING:

!

seriousinjuryordeath.

CAUTION:

moderateinjury orproduct orproperty damage.

!

Thissymbol warnsof imminenthazard whichwill result in serious injuryor death.

This symbol refers to a potential hazard or unsafe practice, which could result in

Thissymbol refers to a potential hazard or unsafe practice, whichmay result in minoror

!

!

!

NOTICE:

eventhough notdangerous.

!

This symbol refers to informationthat needs specialattention or mustbe fully understood

!

2

GENERAL INFORMATION

THIS MANUAL SHOULD BE RETAINED FOR FUTURE REFERENCE

CAUTION:

positioned so the general public can use the equipment make sure that cautions, warnings, and

!

operating instructions are clearly posted near each unit so that anyone using the equipment will
useit correctly and not injurethemselves or harm theequipment.

WARNING:

!

andfrequency listedon the data plate. Connect only to 1 or 3phase as listed on thedata plate.

WARNING:

!

nationalelectrical code and/or otherlocal electricalcodes.

These models are designed, built, and sold for commercial use. If these models are

Checkthe data plate on this unitbefore installation.Connect theunit only to the voltage

Electrical and grounding connections must comply with the applicable portions of the

TABLE OF CONTENTS

SECTION ITEM PAGE

........

!

!

!

1 Specifications 4

2 5

3 General Operation Instructions 6

4 General

5 General 6

6 Warranty Procedure 6

7 Wiring Diagram 7

8 Parts List & Exploded View 8

9 Warranty 11

Installation Instructions

Cleaning Instructions 6

Troubleshooting

3

1. SPECIFICATIONS

MODEL VOLTAGE/KW/AMPS

HFW-AT-2 120V - 1.7 KW - 14.2 5-20P 70107000 70107012 55310

HFW-AT-2 208V - 1.7 KW - 8.2 6-15P 70107070 70107072 85640

HFW-AT-2 240V - 1.7 KW - 7.0 6-15P 70107064 70107074 85640

HFW-AT-3 208V - 2.55 KW - 12.3 L6-20P 70107018 70107013 55952

HFW-AT-3 240V - 2.55 KW - 10.6 6-15P 70107065 70107075 85640

N/A 120V N/A N/A N/A N/A

HFW-AT-4 208V - 3.4 KW - 16.3 L6-30P 70107035 70107014 55950

HFW-AT-4 240V - 3.4 KW - 14.2 L6-20P 70107066 70107076 55952

N/A 120V N/A N/A N/A N/A

HFW-AT-5 208V - 4.25 KW - 20.4 L6-30P 70107054 70107015 55950

HFW-AT-5 240V - 4.25 KW - 17.4 L6-30P 70107067 70107077 55950

N/A 120V N/A N/A N/A N/A

HFW-AT-6 208V - 5.1 KW - 24.5 L6-50P 70107028 70107016 55951

HFW-AT-6 240V - 5.1 KW - 21.3 L6-30P 70107068 70107078 55950

N/A 120V N/A N/A N/A N/A

NEMA

CONFIGURATION

HFW

NO DRAIN

HFW-D

WITH DRAIN

CORD
ASS’Y

DIMENSIONS: MODELS HFW-AT-2 thru 6

A

B

D

E

ABCDEFG

HFW-AT-2 29.750 12.911 23.438 4.078 1.250 4.383 21.875
HFW-AT-3 44.125 12.911 23.438 4.078 1.250 4.383 21.875
HFW-AT-4 58.500 12.911 23.438 4.078 1.250 4.383 21.875
HFW-AT-5 72.875 12.911 23.438 4.078 1.250 4.383 21.875
HFW-AT-6 87.250 12.911 23.438 4.078 1.250 4.383 21.875

C

F

G

4