APW Wyott HDDS-1 Specifications

Developed for High Performance!

• The APW Wyott Built-In Holding Drawers are designed to hold
all "potentially hazardous foods" at required NSF temperatures.

• Heating system is designed to provide fast start-ups, quickly
heating to temperatures up to 200 degrees.

• Thermometer in control panel accurately reflects temperature
in drawer area. Operators can achieve the optimal holding
condition that keeps food safe but does not over-heat food
product.

Maximum Versatility!

• Perimeter heating elements distribute heat evenly through
the drawer area, allowing for maximum control of your
temperature needs.

• Handles Crispy or Moist food equally well by using adjustable
louvers on each drawer. This feature retains the ideal moisture
level in the compartment.

• Drawers can handle a variety of Pan insert sizes or be utilized
directly without inserts, utilizing 12 x 20 x 6 1/2” pan liner provided.

6 1/22

Energy Ef ficient!

• Top and side panels are built with 1-inch fiberglass insulation pads.

• Insulation keeps heat in and keeps exterior panels "cool to
the touch."

Easy to Maintain and Service!

• Removable pan allows for quick clean up of drawer area.

• Front mounted control panel is easy to access and service.

PRODUCT: QUANTITY: ITEM #:

Models:  HDDS-1B  HDDS-2B  HDDS-3B  HDDS-1B  HDDS-2B  HDDS-3B

Designed Smar t

Built Solid

APW Wyott Design Features

Standard & Slimline

Built-In Holding Drawers

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com · [e-mail]

Rev. 5/22/2005

Built-In Holding Drawer

Built to Last

• Exterior is built with heavy-duty stainless steel to protect
against kitchen wear and rust.

• Drawers are constructed with reinforced 14 gauge stainless
steel drawer slides. Will not bend or warp drawer tracking
system.

• 85% increase in drawer bracket support. Drawer Roller
brackets re-inforced by two 16 gauge stainless steel plates.

• Drawers have built-on horizontal stainless steel handles.

Reliability backed by APW Wyott’s Warranty

• All APW Wyott holding drawers are backed by a 1-year parts
and labor warranty, including on-site service calls within 50
miles of authorized service technicians.

• Certified by the following agencies:

• Heavy-duty stainless steel with 1” fiberglass insulation.

• 14 gauge stainless steel drawer slides.

• Each drawer individually controlled by a protected
thermostat, indicatior lamp and rolling read-out thermometer.

• Temperature range of 100° - 200°F (38°C - 93°C).

• Adjustable louvers on each drawer.

• Each drawer has removable 12”x20”x6 1/2” deep stainless
steel liner pan.

• Built-Ins have a Terminal Block for quick installation.

See reverse side for product specifications.

Options

• Perforated well-pan bottom (14900)

• Full and fractional size steamtable pans up to 6” deep

Standard & Slimline

Built-In Holding Drawers

PRODUCT: QUANTITY: ITEM #:

Models:  HDDS-1B  HDDS-2B  HDDS-3B  HDDS-1B  HDDS-2B  HDDS-3B

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 5/22/2005

# 1028

PRODUCT SPECIFICATIONS

Construction:

Stainless steel exterior construction; reinforced
stainless steel drawer slides and roller; insulated
on top and side panels with 1-inch fiberglass
insulation.

Electrical Information:

Each unit is equipped with a terminal block that
is ready for field wiring.

Flange Information:

Top Side

Standard: 1 5/16” 1 13/16”
Slimline: 1 1/8” 15/16”

Shipping:

Freight Class: 92 1/2
FOB: Dallas, TX

*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.

Standard Built-In Drawers (HDD Models)

Slimline Built-In Drawers (HDDS Models)

84 lbs.

(38 kg)

175 lbs.

(79 kg)

254 lbs.

(115 kg)

84 lbs.

(38 kg)

175 lbs.

(79 kg)

254 lbs.

(115 kg)