APW Wyott HDD-1B Specifications

PRODUCT: QUANTITY: ITEM #:

Standard Models:  HDD-1  HDD-2  HDD-3 Slimline Models:  HDDS-1  HDDS-2  HDDS-3

Designed Smar t

Built Solid

APW Wyott Design Features

Standard & Slimline

Countertop Holding Dr awers

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com · [e-mail]

Rev. 6/9/2005

MODEL HDD-1 COUNTERTOP HOLDING DRAWER

See reverse side for product specifications.

Options

• Perforated well-pan bottom

• 2" swivel casters

• 6" Stainless Steel Legs

• Color Drawer Fronts (call factory for color availability and cost)

Built to Last

• Frame, interior and exterior construction is made with stainless steel.

• Drawers are constructed with reinforced 14 gauge stainless steel
drawer slides that ride on two reinforced 16 gauge stainless steel
slide brackets. (Will not bend or warp drawer tracking system.)

• Each Drawer Slide rides on 4 self lubricated, stainless steel rollers
that are secured to the interior walls with a reinforced bolt system.

• APW Wyott Drawer Slides feature a unique "jam-free" side roller,
a design that facilitates the smoothest closing action in the
industry from any angle in which the operator pushes the drawer.

• Drawers have built-on horizontal stainless steel handles.

Reliability backed by APW Wyott’s Warranty

• All APW Wyott holding drawers are backed by a 1-year parts
and labor warranty, including on-site service calls within 50
miles of authorized service technicians.

• Certified by the following agencies:

Developed for High Performance!

• APW Wyott Holding Drawers are designed to hold everything

from crispy foods to moist foods at required NSF temperatures.

• Heating system is designed to provide fast start-ups and heat

recoveries when drawers are open and closed.

• Thermostatic controls in each drawer precisely regulate

temperatures between 110 degrees and 200 degress.

• Perimeter heating elements distribute heat evenly through the

drawer area, promoting consistent food temperatures throughout
the food pan while avoiding scalding due to warmer "hot spots".

• The only Holding Drawer built with "extra deep" holding pan

(6 ¼" deep). Deeper pan holds 6" deep food pans without
resting on the bottom of the holding area. This avoids scalding
on the bottom of food pans.

• Deep Holding Pan is perfect for using with ¼" of water at the

bottom, promoting a more effective heat transfer and higher
humidity level.

• Vent Slides in each Drawer Front allow operator to control the

amount of humidity in each compartment.

Energy Ef ficient!

• The complete Drawer Compartment is protected with 1-inch

fiberglass insulation, including the Drawer Front Panels.
Insulation focuses heat into the food and keeps exterior panels
"cool to the touch."

Easy to Maintain and Service!

• Holding Pan lifts directly out of Drawer, allowing for quick

cleaning and maintenance.

• Heavy-duty stainless steel construction for the frame,
exterior and interior.

• Fully insulated compartments with 1" thick fiberglass sheets
on top, sides and drawer fronts.

• 14 gauge stainless steel drawer slides with reinforced 16
gauge Slide Brackets

• Side "Jam-free" Roller design on the Drawer slide

• Each drawer individually controlled by a protected
thermostat, indicator lamp and rolling read-out thermometer.

• Temperature range of 100° - 200°F (38°C - 93°C).

• Adjustable Vent Controls on each drawer.

• Each drawer has removable 12"x20"x6 1/4" deep stainless
steel liner pan.

• Built-on Stainless steel handles

The Holding Drawer Warmers shall be a APW Wyott Model ...., as

manufactured by the APW Wyott, Dallas, TX, U.S.A. The unit shall

have ....drawer(s) and be rated at ....watts, ....amps. Freestanding

model shall be equipped with a cord and plug. The Drawer Warmer
shall have a stainless steel exterior, interior, drawer slides, and
assembly. Drawer rollers shall be self lubricated, stainless steel. The
drawer slide shall have the "jam-free" side roller system. The unit
shall be insulated in the top, sides and drawer fronts of each com­partment and have individual power switch, thermostat and temper­ature monitor for each drawer.

Consultant Specifications

Standard & Slimline

Countertop Holding Dr awers

PRODUCT: QUANTITY: ITEM #:

Standard Models:  HDD-1  HDD-2  HDD-3 Slimline Models:  HDDS-1  HDDS-2  HDDS-3

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 5/22/2005

# 1028

PRODUCT SPECIFICATIONS

Construction:

Stainless steel exterior construction; reinforced stainless
steel drawer slides and roller; insulated on top and side
panels with 1-inch fiberglass insulation. 4" adjustable
legs.

Electrical Information:

Each unit is equipped with a 60”, three wire grounded
power cord that terminates with a 90 degree three­pronged male plug. The 120V unit uses a NEMA5-15P
plug. The 208/240V unit uses a NEMA6-20P plug.

Shipping:

Freight Class: 92 1/2
FOB: Dallas, TX 75226

*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.

84 lbs

(38 kg)

175 lbs
(79 kg)

254 lbs

(115 kg)

84 lbs

(38 kg)

175 lbs
(79 kg)

254 lbs

(115 kg)