LS C120t
Product Manual
English
Foreword
Thank you for purchasing Aputure “Light Storm” LS C120t
LS C120t LED video light is the rst COB design of Aputure Light Storm. It features CRI 97 and active
fan cooling system with real time feedback of temperature circuit. With Ultra silent Fan, dual power
supply. Standard industrial mount (Bowens mount) design oers you dierent lighting control
requirements. Easily done for your broadcast level photography.
Instructions
Please read and follow these instructions and keep well this manual for further use.
Peel o the COB light warning label before using.
Please do not block the ventilation grille or touch the COB light directly, and do not face the light
directly when the light is on.
Do not place the LED light device near liquids, alcohol or other ammable objects, avoid light device
damage.
Keep the device out of reach of children.
Only use a microber and dry cloth to clean the product.
To reduce the risk of re or electric shock, do not use the product near water.
Please have the product checked by an authorized service or agent if your product has a problem.
The malfunctions caused by your no allowed disassembling are not under the warranty.
Use of original Aputure cable accessories is recommended. Please note that this warranty does not
apply to repairs arising out of the malfunction of non-original Aputure accessories, although you
may request such repairs on a chargeable basis.
The product is certicated by RoHS, CE and FCC. Please operate the product in full compliance with
the operation standards. Please note that this warranty does not apply to repairs arising from
malfunction, although you may request such repairs on a chargeable basis.
The instructions and information in this manual are based on thorough, controlled company testing
procedures. Further notice will not be given if the design or specications change.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
Detailed product manual for Light Storm can be found on the movie solution page on www.aputure.com .
-1-
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Check list
Before starting, Make sure that there are no missing parts as below shows. If not, please contact with
your sellers immediately.
Buckle
Controller box
Magic strip
Hanging column
Button battery
Light Power cable
Controller
AC-DC adapter
* Carring bag is only included in LS C120t KIT, not in LS C120t
Connecting cable
Warranty card
Product manual
-2-
Carrying bag
(
LS C120t KIT
.
)
Nomenclature
NO.:6AS001000
1. Light
Reector
COB light
Clamp handle
Bowens mount
Clamp handle
Ejector handle
Umbrella clamping knob
Supporting tube
push
Socket
Light label
UID
Hanging column
U-frame
2. Controller box
Antenna
(*The signal strength is the best
Eyelet bar
Socket
Power switch
Display screen
Brightness wheel
Controller box label
UID
when pulling the antennas as
the following.)
Battery mount
(*Anton Bauer or V-mount)
DC power socket
Warning:
Keep the UID correspondingly between light and controller box to ensure optimum
performance.
-3-
3. Controller
Channel indicators
Group A on/o
Group B on/o
Group C on/o
Group A brightness button
Group B brightness button
Group C brightness button
Group D on/o
Channel choosing button
4. Display screen
Groups indicator
Channels indicator
Channel setting button
Group setting button
Group D brightness button
Battery compartment
Brightness percent indicator
Force fan operating mode
Auto fan operating mode
Fan operating mode button
-4-
Installations
1. Install the hanging column
2. Install the light
1) Set the light at a specic angle, use clamp handle to install the light on the tripod.
2) Set the light at a specic angle, use clamp handle to fasten the light.
-5-
3. Use connecting cable connect light to controller box
push
* Hang the controller box on
the tripod by buckle.
* Tie the connecting cable around
the hanging column
4. Dual power supply
1) Powered by the adapter
AC 100V-240V
* Please pull the power adapter out by pushing the locking spring down on the controller box.
-6-
push
Locking
spring
Locking
slot
2) Powered by the battery
V-Mount Battery Anton Bauer Battery
* Please buy the battery base on the model of the Light Storm you choose.
Operations
1. Press power switch to turn on the Light
* “Channel 1 ,Group A” is by default.
-7-
2. Manual controlled by the controller box
1) Brightness adjustment and display
min
max
2) Press the (Auto/Force) button can adjust the fan operating model based on using
environments, as the following picture shows
Auto
Force
* 1) Auto Mode: According to the internal temperature of the light to automatically adjust the fan speed. (”Auto mode”
is by default)
* 2) Force Mode: Fan work at the highest speed for optimal heat dissipation. (This mode is recommended in high
temperature environments)
-8-
3. Remote controlled by the controller
You can control the LS C120t of channel 2, group B according to the following directions.
* The Light Storm has three channels (1/2/3) and four groups (A、B、C、D).
1) The controller box setting
*1) Channel setting and display
*2) Group setting and display
2) The controller setting and display
Press ( ) to set the channel 2
The controller setting is nished.
“ ” indicator lights
-9-
3) Brightness and color temperature adjustment
+
Press ( ) of group B to adjust the brightness, the brightness varies 1%. brightness changes
-
between(10%-100%).
Reflector Unlock
Pull ejector handle back，and unlock reector as the picture shows.
-10-
Specifications
Operation Current
Power Supply
Radio Frequency
Sizes
(L*W*H)
CRI
Groups
Light
Controller box
Anton Bauer Battery
Controller box
(V-Mount)
9A
DC 15V
≥97TLCI ≥95CQS
≥97
2.4GHz
A/B/C/D
336.4*186.3*283.9mm
269.0*118.7*48.1mm(*vertical antennas included)
269.0*118.7*59.6mm(*vertical antennas included)
Power Consumption
Cooling Mode
Color Temperature
Channels
Remote Ability
135W maximum
Active Cooling
3000K
1/2/3
≤100m
Brightness (average)
Distance
Footcandles
LUX
0.5m 1m 2m
1032 232 57
11100 2500 610
Trademarks
Bowens is a trademark or registered trademark of Bowens in the P.R.C and other countries.
Anton bauer is a trademark or registered trademark of Anton bauer in the US and other countries.
-11-
Loading...