Applied Research and Technology (ART) HeadAMP V Specification

ARTcessories

00

10

10

2

5

8

0

10

10

2

5

8

0

10

10

2

5

8

0

10

10

2

5

8

0

10

10

2

5

8

Five-Channel Headphone Mixer/Amplifier

Designed & Distributed by: APPLIED RESEARCH AND TECHNOLOGY

TM

PowerPower

Creative audio solutions in cool little boxes.

March 2003

HeadAMP V

5 Channel Headphone Mixer/Amplifier, Half-Rack

™

Home recording studios have become a fact of life with more and
more finished products going straight from the spare room to the
distributor. As a result there is a need for flexible,professional
headphone monitoring sufficient for a number of performers,
all at a reasonable cost. Basic headphone amps offer one set
of stereo inputs and volume-controlled headphone outputs,
however more options are needed in the studio. For example,
it may be necessary to connect more than one stereo source –
possibly the aux. or monitor output from the mixer plus the stereo
output of a tape deck or CD player. It may also be necessary to
insert reverb or EQ on certain headphone channels,and to
interconnect two headphone amps for additional performers.
Naturally, there needs to be a level control for each headset,
clean, accurate reproduction and plenty of power.

Usage:

• Five headphone channels each with its own level control and
1⁄4” stereo out jack

• 1⁄4”TRS insert jacks on channels 1&2 for adding reverb,EQ,etc.

• Left & right RCA Inputs

• Left & right 1⁄4” inputs

• The right 1⁄4”input will also accept a stereo TRS connector
and stereo mix (tip = right,ring = left), such as the headphone
output from a mixer. If a mono jack is connected, only the right
earpieces will work

• The left 1⁄4”input will also accept a mono connector and mono mix

• A 1⁄4”TRS Link jack permits interconnecting two HeadAMP V’s
for 10 headphone
channels,four with inserts, and a total of four input sources

Specifications:

• Input Impedance: 10k Ohms

• Maximum Input Level: +18dBV

• Maximum Gain: 26dB/channel

• Maximum Output Power :300mW/channel

• Output Impedance: 10 Ohms

• Signal-to-noise: <90dB

• T .H.D.:<.008%

• IMD (SMPTE) = <.008%

• Power:12VDC

• Dimensions: 7.5” x 4.75”x 1.25” (190mm x 123mm x 30mm)

• Weight:5lb (227g)

DESIGNED & DISTRIBUTED BY:APPLIED RESEARCH AND TECHNOLOGY • 215 Tremont Street• Rochester, New York 14608 • USA
For Customer Service,please call: 585.436.2720 • Email: [e-mail] • www.artproaudio.com • ART-ARTcs-03/03

90 DAY

WARRANTY