Page 1
GND
EMI Filter
AC
Power
Input
LINE
LOAD
L
N
N
L
V+
V-
P/N:092.00823.00 (LCR)
4
312
POWER
DC POWER
SUPPLY
V-
V+
V+
V-
GND
SWM
SWM24-SF/QF Quick Setup Guide
Requirements
To begin, make sure you have the following equipment:
▪ A 12-70V DC power supply.
▪ A personal computer running Microsoft Windows 98, 2000, ME, NT, XP, Vista or 7 (32 or 64 bit) or Windows 8.
▪ ST Confi gurator™ software (available at www.applied-motion.com/products/software).
▪ A 3004-277-5M power cable, 3004-290-5M I/O cable, or a 3004-278-5M RS-232 programming cable as needed.
▪ NOTE: Cables are NOT included and must be purchased separately.
▪ For more detailed information, please download and read the SWM24 Hardware Manual, available at www.applied-motion.
com/support/manuals.
Step 1
a) Download and install the ST Confi gurator™ software.
b) Launch the software by clicking: Start / Programs / Applied Motion Products / ST Confi gurator
c) Select the correct COM port using the drop down list
d) Connect the drive to your PC using the RS-232 programming cable
Step 2
Wire the drive to the DC power source.
(Do not apply power until Step 3)
Note - the SWM24 accepts DC voltages from 12-70V. If using an
external fuse, we recommend a 5 amp fast acting fuse.
(See the SWM24 Hardware Manual for more information about
power supply and fuse selection.)
Connect I/O, if required by your application. A 3004-290-5M
cable will be required.
(See the SWM24 Hardware Manual for more information about
wiring I/O to the SWM24.)
920-0069 Rev C
Page 2
Step 3
a) Apply power to the drive. The drive model and fi rmware revision should be
automatically displayed. If they are not, check the com port setting.
b) Follow the confi guration instructions in the ST Confi gurator™ help screens.
c) The ST Confi gurator™ software can be used to set up your drive to operate in several
different modes including: Pulse & Direction, Analog Velocity, and SCL.
d) ST Confi gurator™ includes a self test option (under the Drive menu) to verify
that the STM and power supply are correctly wired and confi gured.
If you have any questions or comments, please call Applied Motion Products Customer Support:
(800) 525-1609, or visit us online at www.applied-motion.com.
404 Westridge Dr.
Watsonville, CA 95076
Tel: 800-525-1609
Fax: 831-761 -6544
www.applied-motion.com
SWM24-SF/QF Quick Setup Guide
920-0069 Rev C
Loading...