Appleton EYD 25% * Fill Vertical Conduit Drain Sealing Fittings Catalog Page

EYD 25% * Fill Vertical Conduit Drain Sealing Fittings

For Close Turning Radius. Explosionproof, Dust-Ignitionproof, Raintight

For Use with Threaded Rigid Metal Conduit and IMC.

NEC/CEC:

Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III

HAZARDOUS LOCATION FITTINGS: NEC/CEC EXPLOSIONPROOF SEALING FITTINGS

Trade Size

(Inches)

EYD Vertical Conduit Drain Seals for Close Turning Radius (25% fill)

Female

1/2 83.3 (3.28) 38.1 (1.50) 26.9 (1.06) 28.0 (1.00) EYD-50
3/4 93.7 (3.69) 44.4 (1.75) 30.2 (1.19) 57.0 (2.00) EYD-75

1/2” — 1”

1-1/4” — 3”

3-1/2” — 4”

1/2” — 1”

1-1/4” — 3”

3-1/2” — 4”

1 109.4 (4.31) 55.6 (2.19) 35.0 (1.38) 113.0 (4.00) EYD-100

1-1/4 128.5 (5.06) 55.6 (2.19) 44.4 (1.75) 255.0 (9.00) EYD-125
1-1/2 139.7 (5.50) 61.9 (2.44) 52.3 (2.06) 340.0 (12.00) EYD-150
2 158.7 (6.25) 76.2 (3.00) 58.9 (2.31) 595.0 (21.00) EYD-200
2-1/2 190.5 (7.50) 88.9 (3.50) 68.8 (2.69) 1049.0 (37.00) EYD-250

3 215.9 (8.50) 107.9 (4.25) 79.5 (3.13) 1729.0 (61.00) EYD-300

3-1/2 233.4 (9.19) 120.6 (4.75) 87.3 (3.44) 2268.0 (80.00) EYD-350

4 247.6 (9.75) 13.33 (5.25) 93.7 (3.69) 3175.0 (112.00) EYD-400

Male/Female (Removable Male Nipple)

1/2 83.3 (3.28) 38.1 (1.50) 26.9 (1.06) 28.0 (1.00) EYDM-50
3/4 93.7 (3.69) 44.4 (1.75) 30.2 (1.19) 57.0 (2.00) EYDM-75
1 109.4 (4.31) 55.6 (2.19) 35.0 (1.38) 113.0 (4.00) EYDM-100
1-1/4 128.5 (5.06) 55.6 (2.19) 44.4 (1.75) 255.0 (9.00) EYDM-125
1-1/2 139.7 (5.50) 61.9 (2.44) 52.3 (2.06) 340.0 (12.00) EYDM-150
2 158.7 (6.25) 76.2 (3.00) 58.9 (2.31) 595.0 (21.00) EYDM-200
2-1/2 190.5 (7.50) 88.9 (3.50) 68.8 (2.69) 1049.0 (37.00) EYDM-250

3 215.9 (8.50) 107.9 (4.25) 79.5 (3.13) 1729.0 (61.00) EYDM-300

3-1/2 233.4 (9.19) 120.6 (4.75) 87.3 (3.44) 2268.0 (80.00) EYDM-350

4 247.6 (9.75) 13.33 (5.25) 93.7 (3.69) 3175.0 (112.00) EYDM-400

Millimeters (Inches) Kwiko™ A Cement

Required

Grams (Ounces)

Catalog Number

Ductile/Malleable

Iron A (Length) B (Width) Turning Radius 

EYD

1/2” — 1”

* Per NEC 501.15(C)(6), seals in Class I, Division 1 and 2 must be limited to conductor fill of 25% of cross sectional area of a rigid metal conduit of the same trade
size unless approved for higher percentage fill. See 40% fill sealing fittings.
 Turning radius with cover or plug removed.

© November 2016

EYD

1-1/4” — 4”

693