Type 3R, 4, 4X, IP66
Simultaneous Exposure
Suitable for Use in Wet Locations
Applications
• For use in locations where:
— Flammable gases, dusts and ignitable vapors are continually
present
— A high degree of corrosion resistance is required
— Protection against dirt, water and moisture is necessary
— Access to relamp is difcult
— Extreme temperature conditions are present
The above information is strictly for guidance purposes and does not guarantee compatibility and fit. Please carefully review bolt patterns on each bracket to
ensure it meets your needs
Crouse-Hinds is a registered trademark of Eaton Corporation. Dialight is a registered trademark of Dialight.
Class I, Division 1, Groups C and D
Class II, Division 1, Groups E, F, G
Class III
NEC/CEC:
Type 3R, 4, 4X, IP66
Simultaneous Exposure
Suitable for Use in Wet Locations
NEC/CEC:
Marine Outside Type (Salt
Water) – for US only
American Bureau of Shipping (ABS) Certied
Illustrated Features
Flexibility and Ease of Use
Precision threaded wirebox and cover allows
hassle free access to power leads for easy wiring
and maintenance in challenging conditions.
Cover is secured with a safety chain to prevent
accidental disengagement and enhances
workplace safety
Choose from three color temperatures (CCT): 3000K, 4000K, and 5000K
Standard linear light distribution pattern: wide distribution maximizes spread and work plane brightness to optimize number of
luminaires needed
Configurable Options
Notched position locking mechanism
enables multiple fixtures to be aimed
consistently without spending significant
time
Rigmaster offers a NPT hub on each
end for through wiring. The power
leads are placed inside the wiring
compartment and can be easily
accessed by removing the tool-less wire
box cover
Mounting Brackets : Choose to mount your
Rigmaster using one of these distinctly designed
brackets to best suit your installation needs. All
brackets can be factory installed to save time in
the field or purchased separately.
Safety Features
ERMLSB Large Swivel Bracket:
Can be used to tilt and aim the fixture
up to 90 degrees in increments of 15
degrees using the pre-notched locking
mechanism
EXPLOSION PROOF LED LINEAR: NEC/CEC
Safety cables : can be purchased separately
or included with fixture to reduce ordering and
receiving complexity
Brackets and safety cables can be ordered separately or included with fixture. See Ordering Table for more information.
Up to four points for secondary retention
provide protection against infield
vibration.
ERMLPB Low Profile Bracket: This
fixed position bracket can be used to
lower overall mounting profile in low
ceiling applications
Class I, Division 1, Groups C and D
Class II, Division 1, Groups E, F, G
Class III
NEC/CEC:
Type 3R, 4, 4X, IP66
Simultaneous Exposure
Suitable for Use in Wet Locations
NEC/CEC:
Marine Outside Type (Salt
Water) – for US only
American Bureau of Shipping (ABS) Certied
Order using catalog numbering guides below.
ERMB42CCLBUNGW2
Series:
ERM - Explosionproof
Rigmaster
Linear LED
CID 1
Mounting :
N - If None (Use if Ordering
Appleton Bracket Separately)
B - Large Swivel Bracket
L - Low Prole Bracket
Hub Size :
1 - (4) 1/2" NPT
2 - (4) 3/4" NPT
Color Temperature:
C - Cool 5000K
N - Neutral 4000K
W - Warm 3000K
Light Distribution
Pattern:
L - Linear Pattern
(non-optic)
(standard)
Voltage:
BU - 120-277 Vac;
125-300 Vdc
BH - 347-480 Vac
Color:
G - Appleton Gray
(Standard)
Wiring Method:
W - Wire Nuts (Standard)
Lumen (nominal) :
2 - 4,310 Lumens (2')
4 - 7,530 Lumens (4')
Lens Material:
C - Clear Glass
Emergency:
N - If None (Standard)
Option :
Blank - If None
1 - (1) Safety Cable
2 - (2) Safety Cables
EXPLOSION PROOF LED LINEAR: NEC/CEC
3 close up plugs are provided for conduit hubs.
For lumen output information, see Lumen Values Table.
Brackets and safety cables can be ordered separately or included with fixture. See Ordering Table for more information.
Class I, Division 1, Groups C and D
Class II, Division 1, Groups E, F, G
Class III
NEC/CEC Temperature Codes
Ambient
Temperature
°C (°F)
40 (104)
65 (149)T6T5T5
40 (104)
65 (149)T6T5T5
Supply wire Temperature
°C (°F)
90 (194)
90 (194)
NEC/CEC:
Type 3R, 4, 4X, IP66
Simultaneous Exposure
Suitable for Use in Wet Locations
Class I, Division 1
Groups C and D
T6T6T6
T6T6T6
Class II, Division 1,
Groups E, F and G
NEC/CEC:
Marine Outside Type (Salt
Water) – for US only
American Bureau of Shipping (ABS) Certied
Class I, Division 2,
and Class II, Division 2
Model
ERM*255 (131)T6T6T6
ERM*455 (131)T6T6T6
"T" Numbers Represent the Maximum Internal Temperature or Maximum Surface Temperature
NEC/CEC
"T" #T1350325T2T2AT2BT2CT2DT3T3AT3BT3CT4T4AT5T6
351
326
Temp.
Range
°C (°F)
- 450
(664 -
842
- 350
(619 -
662)
301
- 325
(574 -
617)
281
- 300
(538 -
572)
261
- 280
(448 -
500)
231
- 260
(448 -
500)
216
- 230
(421 -
446)
201
- 215
(394 -
419)
181
- 200
(358 -
392)
166
- 180
(331 -
356)
161
- 165
(322 -
329)
136
- 160
(277 -
320)
121
- 135
(250 -
275)
101
- 120
(214 -
248)
EXPLOSION PROOF LED LINEAR: NEC/CEC
86 100
(187 -
212)
85
(185)
Ambient Temperature Range: -40 °C to +65 °C (-40 °F to +149 °F).
T numbers represent the maximum internal temperature for Class I Division 1 and Class II Division 1 locations designated by the NEC.
T numbers represent the maximum surface temperature under a dust blanket for Class II, Division 2 as designated by the NEC.
Class I, Division 1, Groups C and D
Class II, Division 1, Groups E, F, G
Class III
NEC/CEC:
Type 3R, 4, 4X, IP66
Simultaneous Exposure
Suitable for Use in Wet Locations
NEC/CEC:
Marine Outside Type (Salt
Water) – for US only
American Bureau of Shipping (ABS) Certied
Retrofit Bracket Compatibility Chart
For customers trying to retrofit an existing fixture, use the table below as a guide to select the best bracket to suit your needs
Appleton Part Number
ERMLSB
ManufacturerPart Number
Crouse Hinds™
DP1057MTKXX
Large Swivel Bracket
Low profile Bracket
LTXW4X—
Dialight™
LSXW5—X
AZZ™
Rig-A-Lite™
53050X—
Appleton AccessoriesGRFC75A junction boxX—
Other Accessories and Replacement Parts
DescriptionCatalog Numbers
Safety Cables
ERMLPB
Stainless Steel Safety Cables
LEDSC
Replacement Drivers
Catalog NumberVoltageConstant Current SettingsWattageLuminaire Model
APM050C135UD060
BU600mA50WERM*2
EXPLOSION PROOF LED LINEAR: NEC/CEC
APM050C135HD060BH600 mA50WERM*2
APM050C135UD104BU1040 mA50WERM*4
APM050C135HD104BH1040 mA50WERM*4
Replacement Lenses
DescriptionLuminaire ModelQuantity per luminaireCatalog Number
Clear
Glass Lens
The above information is strictly for guidance purposes and does not guarantee compatibility and fit. Please carefully review bolt patterns on each bracket to
ensure it meets your needs
Crouse-Hinds is a registered trademark of Eaton Corporation.
Dialight is a registered trademark of Dialight.
AZZ and Rig-A-Lite are registered trademarks of AZZ.