K Service Source
K Service Source
Hard Disk 20
Take Apart Cover - 1
|
Cover |
|
No preliminary steps are |
|
required before you begin |
Cover |
this procedure. |
Take Apart |
Cover - 2 |
|
|
|
|
|
1 Using a torx screw- |
|
|
driver, remove the |
|
|
screw from the case |
|
|
bottom. |
Take Apart |
Cover - 3 |
|
|
|
|
2 |
Using a jeweler’s |
|
|
screwdriver, release |
|
|
the tabs that hold the |
|
|
cover. |
Caution: Do not use a screwdriver to separate the case.
3 Use the Macintosh pullapart tool to separate and remove the cover.
Release Tabs
Take Apart |
Controller Board - 4 |
|
|
|
|
Before you begin, remove the cover.
Caution: Review the ESD Controller precautions in Bulletins/ Board Safety.