Apollo Conbraco RVW60 User Manual
Model RVW60
ASME Hot Water Safety Relief Valve
10600 Series
ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can
be pre-set to any pressure ranging from 15 to 160 psig (1 to 11 bar) at 250°F (121°C) max
SUBMITTAL
SHEET
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO#:
Rep:
Wholesale Dist.:
FEATURES
• Sizes: 3/4” – 2” (20 – 50mm)
• ASME Section IV Certified Capacity
• Corrosion Resistant Construction
• Diaphragm Isolated Spring Chamber
• Extremely High Capacity
• Made in the USA
PART NUMBER MATRIX
10 XX X X X
SERIES
NUMBER
10 60 = Standard Outlet 4 = 3/4”
MODEL
61 = Oversize Outlet
INLET SIZE
5 = 1”
6 = 1-1/4”
7 = 1-1/2”
8 = 2”
SET
PRESSURE
PSIG
(15-160)
See Table
PSIG SUFFIX
Sux
Set
Pressure
Sux
Set
Pressure
01 15 17 85
02 20 18 90
03 22 19 95
04 25 20 100
05 30 21 105
06 35 22 110
07 40 23 115
08 43 24 120
09 45 25 125
10 50 30 130
11 55 31 135
12 60 32 140
13 65 33 145
14 70 34 150
15 75 35 155
16 80 36 160
APPROVALS
• ASME Section IV Heating Boilers
• Canadian Registration Number 0G8547.5C
• Pressure Equipment Directive 2014/68/EU (PED)
CAPACITY, BTU/Hr
ASME HV Rating - 90% of Actual Capacity at 10% Overpressure
PSIG
OPTION
CE = CE
15 541,000 876,000 1,515,000 2,061,000 3,397,000
30 827,000 1,339,000 2,316,000 3,151,000 5,193,000
50 1,209,000 1,956,000 3,384,000 4,604,000 7,589,000
100 2,162,000 3,500,000 6,055,000 8,238,000 13,577,000
125 2,639,000 4,272,000 7,390,000 10,054,000 16,571,000
150 3,116,000 5,044,000 8,725,000 11,871,000 19,565,000
PSIG
15 635,000 1,027,000 1,777,000 2,417,000 3,984,000
30 970,000 1,570,000 2,716,000 3,696,000 6,091,000
50 1,418,000 2,295,000 3,969,000 5,400,000 8,900,000
100 2,536,000 4,105,000 7,101,000 9,661,000 15,924,000
125 3,096,000 5,011,000 8,668,000 11,792,000 19,435,000
150 3,655,000 5,916,000 10,234,000 13,923,000 22,947,000
AVAILABLE CONFIGURATIONS
SERIES
NUMBER
10604
10614
10605
10615
10606
10616
10607
10617
10608
10618
SIZE (in.)
FNPT x FNPT
3/4 x 3/4
3/4 x 1
1 x 1
1 x 1-1/4
1-1/4 x 1-1/4
1-1/4 x 1-1/2
1-1/2 x 1-1/2
1-1/2 x 2
2 x 2
2 x 2-1/2
STANDARD MATERIALS LIST
BODY/Cap ASTM B584 Bronze
SPRING Alloy Steel, Plated
SEAT Silicone
RVW60 (10600) Standard Discharge Port
3/4”
106041”10605
1-1/4”
10606
1-1/2”
106072”10608
RVW61 (10610) High Capacity Discharge Port
3/4”
106141”10615
Height
(in.) (mm)
1-1/4”
10616
Width
(in.) (mm)
1-1/2”
106172”10618
(lbs.) (kgs.)
5.3 (133) 3.2 (81) 2.3 (1.1)
6.7 (170) 4.0 (102) 4.0 (1.8)
8.4 (213) 5.1 (129) 7.7 (3.5)
10.8 (274) 5.9 (150) 11.25 (5.1)
14.0 (356) 7.2 (183) 23.5 (10.6)
Weight
Customer Service (704) 841-6000
www.apollovalves.com
SS1032 © 12/16 Page 1 of 1
This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion
of this specification without notice and without incurring obligation to make such changes to Conbraco products
previously or subsequently sold. Please visit apollovalves.com for the most current information.
Loading...