Apollo Conbraco GB-50 User Manual

Job Name:
A
50GB SERIES
BRONZE GAS SHUT-OFF BALL VALVE
Contractor: Job Location: Engineer: Tag: Wholesale Distributor:
P.O. N u mber:

DESCRIPTION

The Apollo® GB-50 series bronze ball valves are designed with proven ASTM grade corrosion resistant materials for “main burner” applications, with cast-in single or dual pilot t aps for faster, simpler installation. Options include a die-cast zinc “wing” or “tee” handle.
FEATURES
Rated Gas Pressures of ½ and 5 psig
Full port design ensures maximum capacity
Reversible Steel Lever Handle
For natural gas, manufactured and mi xed gases,
LP gas and LP gas-air mixtures
Wing and Tee Handle options
UL 125 and UL 842 listed
100% factory tested
Made In USA
MATERIAL
Part Name Material
Body ASTM B584 Bronze Ball ASTM B16 Brass, Cr PLT Stem Packing RPTFE Seat PTFE Stem/Gland ASTM B16 Brass Retainer ASTM B16 Brass Handle / Nut Steel, Zn PLT, Plastisol Grip
CAPACITIES AND DIMENSIONS
Single
Tapped
50GB301 ½” 1/8" 0.5 2.25 1.68 3.85 1.00 693,000 50GB401 ¾” 1/8" 0.75 2.67 1.93 3.85 1.12 1,258,000 50GB501 1” 1/8" 1 3.42 2.19 4.78 1.53 3,144,000 50GB601 1¼” 1/8" 1.25 3.86 2.37 4.78 1.62 3,250,000 50GB701 1½” 1/8" 1.5 4.22 2.81 5.40 1.81 7,745,000 50GB801 2” 1/8" 2 5.02 3.18 5.40 2.18 14,741,000 50GB5A1 1” 1/4" 1 3.42 2.19 4.78 1.53 3,144,000 50GB6A1 1¼” 1/4" 1.25 3.86 2.37 4.78 1.62 6,441,000 50GB7A1 1½” 1/4" 1.5 4.22 2.81 5.40 1.81 7,745,000 50GB8A1 2” 1/4" 2 5.02 3.18 5.40 2.18 14,741,000
Note: Capacities based on 1000 BTU/cubic feet gas at 0.64 specific gravity, at a
P.D. of 1” W.C.
Specify suffix –A for dual tapped version. ½” not available dual tapped.
Size
Side
(in)
Tap Port A B C D BTU/hr

OPTIONS

APPROVALS

ANSI Z21.15, CGA 9.1 (1/2 psig Service) indoor
ASME B16.44 (5 psig Service)
MSS SP-10; Ball Valves
Federal Specification: W W-V-35C, Type: II
Canadi an Registration Number: 0C10908.5C
Guide YRPV: Gas Shut-Off Valve for use with
Guide YSTD: LP Gas shut-off valve
Guide YRBX: F lammable liquid shutoff valve
Guide MHKZ: No. 6 oil at 250° F
GB50
GB50-
1/8” Side Tap - Standard

1/4" Side Tap (1” and larger)

Dual Tap (¾” and larger) –A Suffix Tee Handle Wing Handle
gas shutoff
natural and manufactured gases
Conbraco Industries, Inc. 701 Matthews Mint Hill Rd. Matthews NC 28105 USA ; www.apollovalves.com
Conbraco Industries can accept no responsibility for possible errors in this document and reserves the right to alter its product design or construction without notice and without incurring any obligation
SS1099 © 02/11 Page 1 of 1
to make such changes on Conbraco products previously or subsequently sold. All product specifications are approximate and are provided for re fere nce onl y.
; 704-841-6000
Loading...