The APOLLOXPRESS® small diameter ttings (available
in sizes ½” - 2”) feature copper-body construction for most
congurations. The lead-free design oers a Leak Before
Press® feature. The forward lip aids in the alignment of the
copper tube during insertion, reducing the risk of o-ring
damage. These ttings are approved for underground
applications and are ideal for service and repair. Prelubricated, they are fast and simple to install.
The APOLLOXPRESS® large diameter copper ttings
(available in sizes 2 ½” - 4”) feature a patented solid crosssection grab ring, creating signicant contact with the tube
after pressing. The Leak Before Press® feature allows water
to ow past the sealing element during pressure testing if
the tting has not been pressed. Last, but certainly not
least, we’ve added a visual element: if the break-away band
is still on the tting, it needs to be checked.
FITTINGS
Copper Coupling with Stop
Small Diameter Large Diameter
Dimensions shown in inches
Item No. Description A B C* D**
10075500 800 ½ CxC CPLG W/ ST 1.72 0.95 0.81 0.11 0.95 1.72 0.95
10075502 800 ¾ CxC CPLG W/ ST 1.89 1.24 0.88 0.12 1.24 1.89 1.24
10075504 800 1 CxC CPLG W/ ST 2.06 1.49 0.92 0.23 1.49 2.06 1.49
10075506 800 1¼ CxC CPLG W/ ST 2.33 1.75 1.04 0.24 1.75 2.33 1.75
10075508 800 1½ CxC CPLG W/ ST 3.10 2.09 1.43 0.24 2.09 3.10 2.09
10075510 800 2 CxC CPLG W/ ST 3.42 2.56 1.59 0.25 2.56 3.42 2.56
10061947 800 2½ CxC CPLG W/ ST 4.33 3.16 1.90 0.53 3.16 4.33 3.16
10061952 800 3 CxC CPLG W/ ST 4.65 3.68 2.10 0.45 3.68 4.65 3.68
10061957 800 4 CxC CPLG W/ ST 5.53 4.70 2.50 0.53 4.70 5.53 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
Height Width Depth
Copper Coupling without Stop
Small Diameter Large Diameter
Dimensions shown in inches
Item No. Description A B
10075513 801 ½ CxC CPLG W/O ST 1.72 0.95 0.95 1.72 0.95
10075515 801 ¾ CxC CPLG W/O ST 1.89 1.24 1.24 1.89 1.24
10075517 801 1 CxC CPLG W/O ST 2.07 1.49 1.49 2.07 1.49
10075521 801 1¼ CxC CPLG W/O ST 2.33 1.75 1.75 2.33 1.75
10075523 801 1½ CxC CPLG W/O ST 3.10 2.09 2.09 3.10 2.09
10075527 801 2 CxC CPLG W/O ST 3.41 2.56 2.56 3.41 2.56
10061932 801 2½ CxC CPLG W/O ST 4.33 3.16 3.16 4.65 3.16
10061937 801 3 CxC CPLG W/O ST 4.65 3.68 3.68 4.70 3.68
10061942 801 4 CxC CPLG W/O ST 5.53 4.70 4.70 5.53 4.70
Height Width Depth
Copper Reducer Coupling
Dimensions shown in inches
Item No. Description A B C* D** E*
10075900 801R ¾x½ CxC CPLG 2.14 1.24 0.92 0.44 0.79 1.24 2.14 1.24
10075144 801R 1x½ CxC CPLG 2.37 1.49 0.93 0.64 0.81 1.49 2.37 1.49
10075898 801R 1x¾ CxC CPLG 2.30 1.49 0.98 0.39 0.93 1.49 2.30 1.49
10066073 801R 1¼x½ CxC CPLG 4.27 1.75 1.04 2.38 0.85 1.75 4.27 1.75
10066001 801R 1¼x¾ CxC CPLG 4.13 1.75 1.04 2.24 0.85 1.75 4.13 1.75
10075896 801R 1¼x1 CxC CPLG 2.40 1.75 1.06 0.38 0.97 1.75 2.40 1.75
10066380 801R 1½x½ CxC CPLG 4.86 2.09 1.43 2.62 0.81 2.09 4.86 2.09
10066381 801R 1½x¾ CxC CPLG 4.89 2.09 1.43 2.58 0.89 2.09 4.89 2.09
10066003 801R 1½x1 CxC CPLG 4.60 2.09 1.43 2.25 0.93 2.09 4.60 2.09
10075128 801R 1½x1¼ CxC CPLG 2.87 2.11 1.20 0.63 1.04 2.11 2.87 2.11
10066082 801R 2x½ CxC CPLG 5.86 2.56 1.51 3.43 0.85 2.56 5.86 2.56
10066398 801R 2x¾ CxC CPLG 5.70 2.56 1.59 3.23 0.89 2.56 5.70 2.56
10066005 801R 2x1 CxC CPLG 5.49 2.56 1.59 2.94 0.97 2.56 5.49 2.56
10066072 801R 2x1¼ CxC CPLG 5.18 2.56 1.59 2.55 1.04 2.56 5.18 2.56
10075130 801R 2x1½ CxC CPLG 3.50 2.56 1.40 0.90 1.20 2.56 3.50 2.56
10066440 801R 2½x1 CxC CPLG 6.75 3.16 1.90 3.89 0.97 3.16 6.75 3.16
10066441 801R 2½x1¼ CxC CPLG 6.62 3.16 1.90 3.68 1.04 3.16 6.62 3.16
10066442 801R 2½x1½ CxC CPLG 6.72 3.16 1.90 3.45 1.38 3.16 6.72 3.16
10066074 801R 2½x2 CxC CPLG 6.68 3.16 1.90 3.38 1.40 3.16 6.68 3.16
10066444 801R 3x¾ CxC CPLG 7.48 3.68 2.10 4.55 0.83 3.68 7.48 3.68
10066445 801R 3x1½ CxC CPLG 7.26 3.68 2.10 3.79 1.38 3.68 7.26 3.68
10066446 801R 3x2 CxC CPLG 7.11 3.68 2.10 3.55 1.47 3.68 7.39 3.68
10066076 801R 3x2½ CxC CPLG 7.63 3.68 2.10 3.63 1.90 3.68 7.63 3.68
10066447 801R 4x2 CxC CPLG 8.62 4.70 2.50 4.65 1.47 4.70 8.62 4.70
10066151 801R 4x2½ CxC CPLG 8.90 4.70 2.50 4.50 1.90 4.70 8.90 4.70
10066152 801R 4x3 CxC CPLG 8.93 4.70 2.50 4.33 2.10 4.70 8.93 4.70
*Cup Depth (Dim C & E) Tolerance : Sizes 1/2- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
46
APOLLO VALVES Customer Service (704) 841-6000
Height Width Depth
Small Diameter
Large Diameter
For additional information, submittal sheets and manuals, visit www.apollovalves.com
www.apollovalves.com
FITTINGS
Copper Extended Length Coupling Without Stop
Dimensions shown in inches
Item No. Description A B
10075030
10075032
10075034
801 ½ CXC COUPLING W/O STOP
801 ¾ CXC COUPLING W/O STOP
801 1 CXC COUPLING W/O STOP
3.30 0.95 0.95 3.30 0.95
3.00 1.24 1.24 3.00 1.24
3.58 1.49 1.49 3.58 1.49
Height Width Depth
Lead Free Brass Female Adapter
Female Adapter Female Reducing Adapter
Dimensions shown in inches
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
Item No. Description A B C*
10075750 803 ½ CxF ADAPT 1.52 1.01 0.76 1.01 1.52 1.01
10075752 803 ¾ CxF ADAPT 1.73 1.25 0.92 1.25 1.73 1.25
10075754 803 1 CxF ADAPT 1.76 1.53 0.92 1.53 1.76 1.53
10075756 803 1¼ CxF ADAPT 1.90 1.93 1.04 1.93 1.90 1.93
10075758 803 1½ CxF ADAPT 2.43 2.20 1.43 2.20 2.43 2.20
10075760 803 2 CxF ADAPT 2.44 2.73 1.59 2.73 2.44 2.73
Female Reducing Adapters
10075780 803R ½x⅜ CxF ADAPT 1.34 0.87 0.76 0.87 1.34 0.87
10075782 803R ½x¾ CxF ADAPT 1.62 1.25 0.76 1.25 1.62 1.25
10075784 803R ¾x½ CxF ADAPT 1.50 1.01 0.92 1.01 1.50 1.01
10075796 803R 1x½ CxF ADAPT 1.55 1.01 1.03 1.01 1.55 1.01
10075798 803R 1x¾ CxF ADAPT 1.56 1.25 0.92 1.25 1.56 1.25
10075800 803R 1x1¼ CxF ADAPT 1.96 1.93 0.92 1.93 1.96 1.93
10075786 803R 1¼x½ CxF ADAPT 1.79 1.75 1.04 1.75 1.79 1.75
10075788 803R 1¼x1 CxF ADAPT 1.80 1.75 1.04 1.75 1.80 1.75
10075790 803R 1¼x1½ CxF ADAPT 1.98 2.20 1.04 2.20 1.98 2.20
10075792 803R 1½x¾ CxF ADAPT 2.03 2.09 1.43 2.09 2.03 2.09
10075794 803R 1½x1¼ CxF ADAPT 2.19 2.09 1.43 2.09 2.19 2.09
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
Height Width Depth
Lead Free Brass Female Street Adapter
Female Street Adapter Female Reducing Street Adapter
Dimensions shown in inches
Item No. Description A B
10075762 803-2 ½ FTGxF ADAPT 1.71 1.02 1.02 1.71 1.02
10075768 803-2 ¾ FTGxF ADAPT 1.91 1.25 1.25 1.91 1.25
10075772 803-2 1 FTGxF ADAPT 2.03 1.53 1.53 2.03 1.53
10075774 803-2 1¼ FTGxF ADAPT 2.19 1.93 1.93 2.19 1.93
10075776 803-2 1½ FTGxF ADAPT 2.57 2.20 2.20 2.57 2.20
10075778 803-2 2 FTGxF ADAPT 2.78 2.74 2.74 2.78 2.74
Female Reducing Street Adapters
10075764
10075766 803-2 ½x¾ FTGxF ADAPT 1.79 1.26 1.26 1.79 1.26
10075770 803-2 ¾x½ FTGxF ADAPT 1.84 1.02 1.02 1.84 1.02
10075804 803-2 1x½ FTGxF ADAPT 1.65 1.13 1.13 1.65 1.13
10075802
803-2 ½x⅜ FTGxF ADAPT
803-2 1¼x½ FTGxF ADAPT
1.56 0.87 0.87 1.56 0.87
1.90 1.38 1.38 1.90 1.38
Height Width Depth
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
47
FITTINGS
Male Adapter
Small Diameter Large Diameter Reducing Adapter
Dimensions shown in inches
Item No. Description A B C*
10075806 804 ½ CxM ADAPT 1.92 0.93 0.76 0.93 1.92 0.93
10075808 804 ¾ CxM ADAPT 2.15 1.26 0.92 1.26 2.15 1.26
10075844 804 1 CxM ADAPT 2.39 1.50 0.92 1.50 2.39 1.50
10075810 804 1¼ CxM ADAPT 2.39 1.71 1.04 1.71 2.39 1.71
10075812 804 1½ CxM ADAPT 2.68 2.13 1.43 2.13 2.68 2.13
10075814 804 2 CxM ADAPT 2.97 2.60 1.59 2.60 2.97 2.60
10061982 804 2½ CxM ADAPT 4.11 3.16 1.90 3.16 4.11 3.16
10061987 804 3 CxM ADAPT 4.35 3.68 2.10 3.56 4.35 3.16
10061992 804 4 CxM ADAPT 5.43 4.70 2.50 4.70 5.43 3.16
Male Reducing Adapters
10075836 804R ½x⅜ CxM ADAPT 1.79 0.93 0.76 0.93 1.79 0.93
10075838 804R ½x¾ CxM ADAPT 1.86 1.05 0.76 1.05 1.86 1.05
10075840 804R ¾x½ CxM ADAPT 2.21 1.26 0.92 1.26 2.21 1.26
10075842 804R ¾x1 CxM ADAPT 2.60 1.50 0.92 1.50 2.60 1.50
10075854 804R 1x¾ CxM ADAPT 2.24 1.50 0.92 1.50 2.24 1.50
10075856 804R 1x1¼ CxM ADAPT 2.44 1.71 0.92 1.71 2.44 1.71
10075846 804R 1¼x1 CxM ADAPT 2.42 1.71 1.04 1.71 2.42 1.71
10075848 804R 1¼x1½ CxM ADAPT 2.62 1.90 1.04 1.90 2.62 1.90
10075850 804R 1½x1¼ CxM ADAPT 2.73 2.12 1.43 2.12 2.73 2.12
10075852 804R 1½x2 CxM ADAPT 2.82 2.59 1.43 2.59 2.82 2.59
10075858 804R 2x1½ CxM ADAPT 3.10 2.57 1.59 2.57 3.1 2.57
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
Height Width Depth
Lead Free Brass Male Street Adapter
Reducing AdapterSmall Diameter
Dimensions shown in inches
Item No. Description A B
10075816 804-2 ½ FTGxM ADAPT 2.23 0.84 0.84 2.23 0.84
10075822 804-2 ¾ FTGxM ADAPT 2.40 1.05 1.05 2.40 1.05
10075826 804-2 1 FTGxM ADAPT 2.72 1.31 1.31 2.72 1.31
10075828 804-2 1¼ FTGxM ADAPT 2.82 1.66 1.66 2.82 1.66
10075830 804-2 1½ FTGxM ADAPT 3.27 1.90 1.90 3.27 1.90
10075834 804-2 2 FTGxM ADAPT 3.46 2.37 2.37 3.46 2.37
Male Reducing Street Adapters
10075818
10075820 804-2 ½x¾ FTGxM ADAPT 2.42 1.05 1.05 2.42 1.05
10075824 804-2 ¾x½ FTGxM ADAPT 2.31 0.98 0.98 2.31 0.98
10075832 804-2 1x¾ FTGxM ADAPT 2.55 1.32 1.32 2.55 1.32
804-2 ½x⅜ FTGxM ADAPT
1.99 0.68 0.68 1.99 0.68
Height Width Depth
Copper 45° Elbow
Dimensions shown in inches
Item No. Description A B C* D**
10075060 806 ½ CxC 45 EL 2.14 1.52 0.78 0.32 1.52 2.14 0.95
10075062 806 ¾ CxC 45 EL 2.62 1.91 0.92 0.41 1.91 2.62 1.24
10075064 806 1 CxC 45 EL 3.10 2.28 0.97 0.59 2.28 3.10 1.49
10075090 806 1¼ CxC 45 EL 3.62 2.69 1.09 0.72 2.69 3.62 1.75
10075092 806 1½ CxC 45 EL 4.20 3.16 1.31 0.78 3.16 4.20 2.09
10075094 806 2 CxC 45 EL 5.12 3.88 1.51 1.02 3.73 5.13 2.58
10062052 806 2½ CxC 45 EL 5.89 4.67 1.90 0.91 4.67 5.89 3.16
10062057 806 3 CxC 45 EL 6.58 5.33 2.10 1.00 5.31 6.57 3.68
10062062 806 4 CxC 45 EL 8.10 6.67 2.50 1.28 6.67 8.10 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
48
Height Width Depth
APOLLO VALVES Customer Service (704) 841-6000
Small Diameter
Large Diameter
For additional information, submittal sheets and manuals, visit www.apollovalves.com
www.apollovalves.com
FITTINGS
Copper 45° Street Elbow
Dimensions shown in inches
Item No. Description A B C* D** E*** F**
10075054 806-2 ½ FTGxC 45 ST EL 2.60 1.89 0.76 0.43 1.00 1.69 1.89 2.60 0.95
10075056 806-2 ¾ FTGxC 45 ST EL 2.96 2.25 0.92 0.41 1.38 1.88 2.25 2.96 1.24
10075058 806-2 1 FTGxC 45 ST EL 3.23 2.33 0.93 0.71 1.16 1.69 2.33 3.23 1.49
10075084 806-2 1¼ FTGxC 45 ST EL 3.67 2.73 1.09 0.72 1.19 1.94 2.55 3.61 1.75
10075086 806-2 1½ FTGxC 45 ST EL 4.09 3.06 1.31 0.78 1.16 2.02 3.06 4.09 2.11
10075088 806-2 2 FTGxC 45 ST EL 5.29 3.95 1.59 1.06 1.65 2.72 3.95 5.29 2.55
10062037 806-2 2½ FTGxC 45 EL 5.97 4.74 1.90 0.91 2.09 3.16 4.74 5.97 3.16
10062042 806-2 3 FTGxC 45 EL 6.62 5.36 2.10 1.00 2.25 3.41 5.36 6.62 3.68
10062047 806-2 4 FTGxC 45 EL 8.18 6.74 2.50 1.28 2.63 4.16 6.74 8.18 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
***Fit End (Dim E) Tolerance : Sizes 1/2” - 1” +.06/-.00, Sizes 1-1/4” - 2” +.09/-.00, Sizes 2-1/2”- 4” +.12/-.00
Copper 90° Elbow
Small Diameter Large Diameter
Close Turn
Height Width Depth
Large Diameter
Close Turn
Reducing
Small Diameter
Large Diameter
Large Diameter
Long Turn
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
Dimensions shown in inches
Item No. Description A B C* D** E* F**
10075554 807 ½ CXC 90 DEG. EL 1.97 1.97 0.76 0.75 1.97 1.97 0.95
10075556 807 ¾ CXC 90 DEG. EL 2.58 2.58 0.93 1.03 2.58 2.58 1.24
10075052 807 1 CxC 90 EL 2.97 2.97 0.92 1.31 2.97 2.97 1.49
10075078 807 1¼ CxC 90 EL 3.83 3.83 1.09 1.87 3.83 3.83 1.75
10075080 807 1½ CxC 90 EL 4.37 4.37 1.31 2.02 4.37 4.37 2.11
10075082 807 2 CxC 90 EL 5.35 5.35 1.51 2.56 5.35 5.35 2.58
Reducing Elbow
10066101 807 ¾x½ CxC 90 EL 2.58 3.67 0.93 1.03 0.81 2.25 3.67 2.58 1.24
10066099 807 1x½ CxC 90 EL 2.97 4.43 0.92 1.31 0.81 2.88 4.43 2.97 1.49
10066083 807 1x¾ CxC 90 EL 2.97 4.27 0.92 1.31 0.85 2.68 4.27 2.97 1.49
Close Turn Elbow - Large Diameter Copper
10062021 807-C 2½ CxC 90 EL 5.23 5.23 1.90 1.75 5.23 5.23 3.16
10062027 807-C 3 CxC 90 EL 5.94 5.94 2.10 2.00 5.95 5.95 3.68
10062032 807-C 4 CxC 90 EL 7.44 7.44 2.50 2.59 7.44 7.44 4.70
Close Turn Reducing Elbow - Large Diameter Copper
10066460 807 3x2 CxC 90 EL 5.94 8.41 2.10 2.00 1.51 5.07 8.41 5.94 3.68
10066141 807 3x2½ CxC 90 EL 5.94 8.93 2.10 2.00 1.90 5.19 5.94 8.93 3.68
Long Turn Elbow - Large Diameter Copper
10062066 807-L 2½ CxC 90 EL 6.67 6.67 1.90 3.19 6.67 6.67 3.16
10062067 807-L 3 CxC 90 EL 8.56 8.56 2.10 4.58 8.56 8.56 3.68
10062069 807-L 4 CxC 90 EL 9.75 9.75 2.50 4.90 9.75 9.75 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
Height Width Depth
Small Diameter
Large Diameter
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
49
FITTINGS
Copper 90°
Small Diameter Large Diameter
Close Turn
Large Diameter
Long Turn
Street Elbow
Dimensions shown in inches
Item No. Description A B C* D** E*** F**
10075566 807-2 1/2 FTGXC 90 ST EL 1.80 2.38 0.76 0.73 0.97 1.91 2.38 1.80 0.95
10075568 807-2 3/4 FTGXC 90 ST EL 2.37 2.82 0.93 1.01 1.06 2.20 2.82 2.37 1.24
10075046 807-2 1 FTGxC 90 ST EL 2.87 3.56 0.92 1.40 1.13 2.81 3.56 2.87 1.49
10075072 807-2 1¼ FTGxC 90 ST EL 3.64 3.85 1.09 1.87 1.19 2.97 3.85 3.64 1.75
10075074 807-2 1½ FTGxC 90 ST EL 4.14 4.40 1.31 2.02 1.36 3.34 4.40 4.14 2.11
10075076 807-2 2 FTGxC 90 ST EL 5.12 5.56 1.51 2.56 1.56 4.27 5.56 5.12 2.58
Close Turn Street Elbow - Large Diameter Copper
10062007 807-C-2 2½ CxC 90 EL 4.96 5.54 1.90 1.75 2.03 3.96 5.54 4.96 3.16
10062012 807-C-2 3 CxC 90 EL 5.66 6.25 2.10 2.00 2.25 4.41 6.25 5.66 3.68
10062017 807-C-2 4 CxC 90 EL 7.15 7.89 2.50 2.59 2.75 5.54 7.89 7.15 4.70
Long Turn Street Elbow - Large Diameter Copper
10062071 807-L-2 2½ CxC 90 EL 6.40 6.92 1.90 3.19 2.03 5.34 6.92 6.40 3.16
10062073 807-L-2 3 CxC 90 EL 8.28 8.71 2.10 4.62 2.25 6.87 8.71 8.28 3.68
10062074 807-L-2 4 CxC 90 EL 10.44 10.98 2.50 5.88 2.75 8.63 10.98 10.44 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
***Fit End (Dim E) Tolerance : Sizes 1/2” - 1” +.06/-.00, Sizes 1-1/4” - 2” +.09/-.00, Sizes 2-1/2”- 4” +.12/-.00
Height Width Depth
Small Diameter
Large Diameter
Copper & Low Lead Brass 90° Female Elbow
Dimensions shown in inches
Item No. Description A B D* E** F*
10066578 8707-3-2 ½ FTGxF 90 EL 2.87 2.42 2.16 0.97 1.91 2.42 2.87 1.02
*Lay-in (Dim D&F) Tolerance : Size 1/2” +.07/-.03
**Fit End (Dim E) Tolerance : Sizes 1/2” +.06/-.00
Height Width Depth
Copper & Low Lead Brass 90° Drop Ear Elbow
Dimensions shown in inches
Item No. Description A B C* D** F**
10075366 8707-3-5 ½ CxF 90 DRP EAR EL 2.71 1.35 0.85 1.28 0.88 1.35 2.71 2.12
10075368 8707-3-5 ¾ CxF 90 DRP EAR EL 3.28 1.62 0.89 1.70 1.00 1.62 3.28 2.34
10075369 8707-3-5 1 CxF 90 DRP EAR EL 3.77 1.96 0.97 1.93 1.25 1.96 3.77 2.59
Reducing Drop Ear Elbow
10075367 8707-3-5 ½x⅜ CxF 90 DRP EAR EL 2.56 1.09 0.85 1.21 0.71 1.09 2.56 1.59
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 1” +/- .045
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Size 1” +.09/-.03, (Dim F) : +/-.06
Height Width Depth
For additional information, submittal sheets and manuals, visit www.apollovalves.com
50
www.apollovalves.com
APOLLO VALVES Customer Service (704) 841-6000
FITTINGS
Copper & Low Lead Brass 90° Female Elbow
Dimensions shown in inches
Item No. Description A B C* D** F**
10066560 8707-3 ½ CxF 90 EL 2.10 3.00 0.76 0.74 2.44 3.00 2.10 1.02
10066561 8707-3 ¾ CxF 90 EL 2.58 3.54 0.93 1.03 2.92 3.54 2.58 1.25
10066562 8707-3 1 CxF 90 EL 2.99 4.07 0.92 1.31 3.33 4.07 2.99 1.53
10066563 8707-3 1¼ CxF 90 EL 3.92 4.91 1.09 1.87 4.04 4.91 3.92 1.93
10066564 8707-3 1½ CxF 90 EL 4.43 5.63 1.31 2.02 4.58 5.63 4.43 2.20
10066565 8707-3 2 CxF 90 EL 5.43 6.60 1.51 2.55 5.32 6.60 5.43 2.74
Reducing Female Elbow
10066566 8707-3 ½x⅜ CxF 90 RED EL 1.97 2.76 0.76 0.74 2.29 2.74 1.97 0.94
10066567 8707-3 ½x¾ CxF 90 RED EL 2.13 2.99 0.76 0.74 2.52 2.99 2.13 1.26
10066568 8707-3 ¾x½ CxF 90 RED EL 2.58 3.47 0.93 1.03 2.85 3.47 2.58 1.24
10066569 8707-3 1x½ CxF 90 RED EL 2.97 3.68 0.92 1.31 2.95 3.68 2.97 1.49
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
Copper & Low Lead Brass 90° Male Elbow
Dimensions shown in inches
Item No. Description A B C* D** F**
10066570 8707-4 ½ CxM 90 EL 1.97 3.43 0.76 0.74 2.96 3.43 1.97 0.94
10066571 8707-4 ¾ CxM 90 EL 2.58 4.00 0.93 1.03 3.58 4.00 2.58 1.24
10066572 8707-4 1 CxM 90 EL 2.97 4.76 0.92 1.31 4.02 4.76 2.97 1.49
10066573 8707-4 1¼ CxM 90 EL 3.83 5.54 1.09 1.87 4.67 5.54 3.83 1.75
10066574 8707-4 1½ CxM 90 EL 4.37 6.30 1.31 2.02 5.26 6.30 4.37 2.11
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
10066575 8707-4 2 CxM 90 EL 5.35 7.25 1.51 2.55 5.97 7.25 5.35 2.58
Reducing Male Elbow
10066576 8707-4 ½x¾ CxM 90 RED EL 2.03 3.62 0.76 0.74 3.15 3.62 2.03 1.05
10066577 8707-4 ¾x½ CxM 90 RED EL 2.58 3.94 0.93 1.03 3.32 3.94 2.58 1.24
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
Height Width Depth
Height Width Depth
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
51
FITTINGS
Copper Reducing Outlet Tee
Single Piece
Small Diameter
Small Diameter Large Diameter
Large Diameter
Dimensions shown in inches
Item No. Description A B C* D** E* F**
10075906 811 ¾x¾x½ CxCxC TEE 3.13 2.07 0.92 0.65 0.76 0.70 2.07 3.13 1.24
10075904 811 1x1x½ CxCxC TEE 3.30 2.32 0.93 0.72 0.76 0.82 2.32 3.30 1.49
10075902 811 1x1x¾ CxCxC TEE 3.67 2.44 0.93 0.86 0.92 0.79 2.44 3.67 1.50
10075106 811 1¼x1¼x½ CxCxC TEE 4.12 3.04 1.09 0.98 0.85 1.44 3.04 4.12 1.75
10075102 811 1¼x1¼x¾ CxCxC TEE 4.12 3.16 1.09 0.98 0.89 1.34 3.10 4.12 1.75
10075104 811 1¼x1¼x1 CxCxC TEE 4.12 3.04 1.09 0.98 0.97 1.20 3.04 4.12 1.75
10066015 811 1½x1½x½ CxCxC TEE 4.00 4.22 1.31 0.69 0.81 2.36 4.22 4.00 2.11
10075108 811 1½x1½x¾ CxCxC TEE 4.00 3.07 1.31 0.69 0.89 1.14 3.07 4.00 2.11
10075110 811 1½x1½x1 CxCxC TEE 4.25 3.16 1.31 0.82 0.97 1.14 3.16 4.25 2.11
10075112 811 1½x1½x1¼ CxCxC TEE 4.50 3.28 1.31 0.94 1.09 1.14 3.28 4.50 2.11
10066385 811 2x2x½ CxCxC TEE 5.75 6.69 1.51 1.37 0.85 4.56 6.69 5.75 2.58
10075114 811 2x2x¾ CxCxC TEE 4.39 3.65 1.59 0.61 0.89 1.47 3.65 4.39 2.58
10075116 811 2x2x1 CxCxC TEE 4.75 3.72 1.51 0.87 0.97 1.47 3.72 4.75 2.58
10075118 811 2x2x1¼ CxCxC TEE 5.00 3.84 1.51 0.99 1.09 1.46 3.84 5.00 2.58
10075120 811 2x2x1½ CxCxC TEE 5.75 4.35 1.51 1.37 1.31 1.76 4.35 5.75 2.58
10062079 811 3x3x2½ CxCxC TEE 7.95 5.90 2.10 1.88 1.90 2.16 5.90 7.95 3.68
10062078 811 4x4x2½ CxCxC TEE 9.84 6.91 2.50 2.42 1.90 2.66 6.91 9.84 4.70
10062076 811 4x4x3 CxCxC TEE 9.84 7.28 2.50 2.42 2.10 2.83 7.28 9.84 4.70
Single Piece Copper Reducing Outlet Tee
10068042 811R 2½x2½x½ REDUCED TEE 7.15 5.58 1.90 1.67 0.85 3.12 5.58 7.15 3.16
10068045 811R 2½x2½x¾ REDUCED TEE 7.15 5.42 1.90 1.67 0.89 2.95 5.42 7.15 3.16
10068048 811R 2½x2½x1 REDUCED TEE 7.15 5.21 1.90 1.67 0.97 2.66 5.21 7.15 3.16
10068051 811R 2½x2½x1¼ REDUCED TEE 7.15 4.58 1.90 1.67 1.04 1.96 4.58 7.15 3.16
10068054 811R 2½x2½x1½ REDUCED TEE 7.15 4.83 1.90 1.67 1.43 1.82 4.83 7.15 3.16
10068057 811R 2½x2½x2 REDUCED TEE 7.15 5.08 1.90 1.67 1.59 1.92 5.08 7.15 3.16
10068060 811R 3x3x½ REDUCED TEE 7.95 6.21 2.10 1.87 0.85 3.53 6.21 7.95 3.68
10068063 811R 3x3x¾ REDUCED TEE 7.95 6.05 2.10 1.87 0.89 3.33 6.05 7.96 3.68
10068066 811R 3x3x1 REDUCED TEE 7.95 5.84 2.10 1.87 0.97 3.04 5.84 7.95 3.68
10068069 811R 3x3x 1¼ REDUCED TEE 7.95 5.09 2.10 1.87 1.04 2.21 5.09 7.95 3.68
10068072 811R 3x3x 1½ REDUCED TEE 7.95 5.34 2.10 1.87 1.43 2.07 5.34 7.95 3.68
10068075 811R 3x3x2 REDUCED TEE 7.95 5.59 2.10 1.87 1.59 2.17 5.59 7.95 3.68
10068078 811R 4x4x½ REDUCED TEE 9.84 7.33 2.50 2.42 0.85 4.13 7.33 9.84 4.70
10068081 811R 4x4x¾ REDUCED TEE 9.84 7.17 2.50 2.42 0.89 3.93 7.17 9.84 4.70
10068084 811R 4x4x1 REDUCED TEE 9.84 6.96 2.50 2.42 0.97 3.64 6.96 9.84 4.70
10068087 811R 4x4x1¼ REDUCED TEE 9.84 6.10 2.50 2.42 1.04 2.71 6.10 9.84 4.70
10068090 811R 4x4x1½ REDUCED TEE 9.84 6.35 2.50 2.42 1.43 2.57 6.35 9.84 4.70
10068093 811R 4x4x2 REDUCED TEE 9.84 6.60 2.50 2.42 1.59 2.67 6.60 9.84 4.70
*Cup Depth (Dim C&E) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
Height Width Depth
Single Piece
For additional information, submittal sheets and manuals, visit www.apollovalves.com
52
www.apollovalves.com
APOLLO VALVES Customer Service (704) 841-6000
FITTINGS
Copper Reducing Run/Outlet Tee - Small Diameter
Dimensions shown in inches
Item No. Description A B C* D** E* F** G* H**
10066590 811 ¾x½x½ CxCxC TEE 4.25 2.07 0.92 0.65 0.81 1.87 0.76 0.70 2.07 4.25 1.24
10066039 811 ¾x½x¾ CxCxC TEE 4.58 2.17 0.92 0.82 0.81 2.04 0.92 0.64 2.17 4.58 1.24
10066591 811 1x½x½ CxCxC TEE 4.74 2.32 0.93 0.72 0.81 2.28 0.76 0.82 2.32 4.74 1.50
10066592 811 1x½x¾ CxCxC TEE 5.07 2.44 0.98 0.86 0.81 2.42 0.92 0.79 2.44 5.07 1.50
10066066 811 1x½x1 CxCxC TEE 5.30 2.51 0.98 0.98 0.81 2.54 0.98 0.80 2.51 5.30 1.50
10066593 811 1x¾x½ CxCxC TEE 4.59 2.32 0.93 0.72 0.85 2.09 0.76 0.82 2.32 4.59 1.50
10066594 811 1x¾x¾ CxCxC TEE 4.91 2.44 0.98 0.86 0.85 2.23 0.92 0.79 2.44 4.91 1.50
10066040 811 1x¾x1 CxCxC TEE 5.14 2.51 0.98 0.98 0.85 2.35 0.98 0.80 2.51 5.14 1.50
10066102 811 1x¾x1¼ CxCxC TEE 7.04 2.94 0.93 2.45 0.85 2.82 1.09 0.98 2.94 7.04 1.75
10066049 811 1¼x½x½ CxCxC TEE 5.87 3.04 1.09 0.98 0.85 2.96 0.85 1.44 3.04 5.87 1.75
10066080 811 1¼x½x1 CxCxC TEE 5.50 3.04 1.09 0.98 0.81 2.64 0.97 1.20 3.04 5.50 1.75
10066392 811 1¼x½x1¼ CxCxC TEE 5.86 2.94 1.09 0.98 0.85 2.96 1.09 0.98 2.94 5.86 1.75
10066051 811 1¼x¾x½ CxCxC TEE 5.73 3.04 1.09 0.98 0.85 2.82 0.85 1.44 3.04 5.73 1.75
10066052 811 1¼x¾x¾ CxCxC TEE 5.73 3.10 1.09 0.98 0.85 2.82 0.89 1.34 3.10 5.73 1.75
10066053 811 1¼x¾x1 CxCxC TEE 5.73 3.04 1.09 0.98 0.85 2.82 0.97 1.20 3.04 5.73 1.75
10066054 811 1¼x¾x1¼ CxCxC TEE 5.73 2.94 1.09 0.98 0.85 2.82 1.09 0.98 2.94 5.73 1.75
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
10066044 811 1¼x¾x1½ CxCxC TEE 8.04 3.43 1.04 2.72 0.89 3.40 1.31 1.07 3.43 8.04 1.75
10066055 811 1¼x1x½ CxCxC TEE 5.44 3.04 1.09 0.98 0.93 2.45 0.85 1.44 3.04 5.44 1.75
10075122 811 1¼x1x¾ CxCxC TEE 4.10 3.10 1.09 0.98 0.97 1.07 0.89 1.34 3.10 4.10 1.75
10075124 811 1¼x1x1 CxCxC TEE 4.10 3.04 1.09 0.98 0.97 1.07 1.09 1.20 3.04 4.10 1.75
10066056 811 1¼x1x1¼ CxCxC TEE 5.44 2.94 1.09 0.98 0.93 2.45 1.09 0.98 2.94 5.44 2.11
10066395 811 1¼x1x1½ CxCxC TEE 7.75 3.43 1.04 2.72 0.93 3.07 1.31 1.07 3.43 7.75 2.11
10066394 811 1½x½x1¼ CxCxC TEE 6.38 3.28 1.31 0.94 0.81 3.33 1.09 1.14 3.28 6.38 2.11
10066009 811 1½x½x1½ CxCxC TEE 6.63 3.43 1.31 1.07 0.81 3.45 1.31 2.38 3.43 6.63 2.11
10066195 811 1½x¾x½ CxCxC TEE 5.91 4.22 1.31 0.69 0.89 3.02 0.81 2.36 4.22 5.54 2.11
10066383 811 1½x¾x¾ CxCxC TEE 5.91 3.07 1.31 0.69 0.89 3.02 0.89 1.14 3.07 5.91 2.11
10066397 811 1½x¾x1 CxCxC TEE 6.16 3.16 1.31 0.82 0.89 3.15 0.97 1.14 3.16 6.16 2.11
10066058 811 1½x¾x1¼ CxCxC TEE 5.97 3.28 1.31 0.94 0.85 2.87 1.09 1.14 3.28 5.97 2.11
10066043 811 1½x¾x1½ CxCxC TEE 6.66 3.43 1.31 1.07 0.89 3.40 1.31 1.07 3.43 6.66 2.11
10066042 811 1½x¾x2 CxCxC TEE 10.11 4.17 1.31 3.57 0.89 4.35 1.51 1.37 4.17 10.11 2.11
10066011 811 1
10066012 811 1½x1x1 CxCxC TEE 5.87 3.16 1.31 0.82 0.93 2.82 0.97 1.14 3.16 5.87 2.11
10066081 811 1½x1x1¼ CxCxC TEE 6.12 3.28 1.31 0.94 0.93 2.94 1.09 1.14 3.28 6.12 2.11
10066013 811 1½x1x1½ CxCxC TEE 6.37 3.43 1.31 1.07 0.93 3.07 1.31 1.07 3.43 6.37 2.11
10066108 811 1½x1x2 CxCxC TEE 9.90 4.17 1.31 3.57 0.97 4.06 1.51 1.37 4.17 9.90 2.11
10066059 811 1½x1¼x½ CxCxC TEE 5.38 4.22 1.31 0.69 1.04 2.34 0.81 2.36 4.22 5.38 2.11
10066060 811 1½x1¼x¾ CxCxC TEE 5.38 3.07 1.31 0.69 1.04 2.34 0.89 2.02 3.07 5.38 2.11
10066014 811 1½x1¼x1 CxCxC TEE 5.63 3.16 1.31 0.82 1.04 2.47 0.97 1.14 3.16 5.63 2.11
10075126 811 1½x1¼x1¼ CxCxC TEE 4.37 3.26 1.31 0.94 1.09 1.03 1.09 1.14 3.26 4.37 2.11
10066393 811 1½x1¼x1½ CxCxC TEE 6.13 3.43 1.31 1.07 1.04 2.72 1.31 1.07 3.43 6.13 2.11
10066109 811 1½x1¼x2 CxCxC TEE 9.59 4.17 1.31 3.57 1.04 3.67 1.51 1.37 4.17 9.59 2.58
*Cup Depth (Dim C,E,G) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D,F,H) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
½x1x¾ CxCxC TEE 5.62 3.07 1.31 0.69 0.93 2.69 0.89 1.14 3.07 5.62 2.11
Height Width Depth
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
53
FITTINGS
Copper Reducing Run/Outlet Tee - Small Diameter (cont’d)
Dimensions shown in inches
Item No. Description A B C* D** E* F** G* H**
10066384 811 2x½x2 CxCxC TEE 8.28 4.17 1.51 1.37 0.85 4.56 1.51 1.37 4.17 8.28 2.58
10066121 811 2x¾x¾ CxCxC TEE 6.67 3.65 1.51 0.61 0.89 3.59 0.89 1.47 3.65 6.67 2.58
10066092 811 2x¾x1½ CxCxC TEE 8.11 4.35 1.51 1.37 0.89 4.35 1.31 1.76 4.35 8.11 2.58
10066388 811 2x¾x2 CxCxC TEE 8.11 4.17 1.51 1.37 0.89 4.35 1.51 1.37 4.17 8.11 2.58
10066079 811 2x1x½ CxCxC TEE 6.46 4.80 1.59 0.61 0.97 3.30 0.81 2.69 4.80 6.46 2.58
10066062 811 2x1x¾ CxCxC TEE 6.46 3.65 1.59 0.61 0.97 3.30 0.89 1.47 3.65 6.46 2.58
10066017 811 2x1x1 CxCxC TEE 6.90 3.72 1.51 0.87 0.97 3.56 0.97 1.47 3.72 6.90 2.58
10066126 811 2x1x1¼ CxCxC TEE 7.15 3.84 1.51 0.99 0.97 3.68 1.09 1.46 3.84 7.15 2.58
10066197 811 2x1x1½ CxCxC TEE 7.90 4.35 1.51 1.37 0.97 4.06 1.31 1.76 4.35 7.90 2.58
10066018 811 2x1x2 CxCxC TEE 7.90 4.17 1.51 1.37 0.97 4.06 1.51 1.37 4.17 7.90 2.58
10066063 811 2x1¼x¾ CxCxC TEE 6.14 3.65 1.59 0.61 1.04 2.91 0.89 1.47 3.65 6.14 2.58
10066129 811 2x1¼x1 CxCxC TEE 6.59 3.71 1.51 0.87 1.04 3.17 0.97 1.47 3.71 6.59 2.58
10066019 811 2x1¼x1¼ CxCxC TEE 6.84 3.84 1.51 0.99 1.04 3.29 1.09 1.46 3.84 6.84 2.58
10066125 811 2x1¼x1½ CxCxC TEE 7.59 4.35 1.51 1.37 1.04 3.67 1.31 1.76 4.35 7.59 2.58
10066064 811 2x1¼x2 CxCxC TEE 7.59 4.17 1.51 1.37 1.04 3.67 1.51 1.37 4.17 7.59 2.58
10066065 811 2x1½x½ CxCxC TEE 6.31 4.80 1.59 0.61 1.31 2.81 0.81 2.69 4.80 6.31 2.58
10066020 811 2x1½x¾ CxCxC TEE 6.31 3.65 1.59 0.61 1.31 2.81 0.89 1.47 3.65 6.31 2.58
10066021 811 2x1½x1 CxCxC TEE 6.75 3.71 1.51 0.87 1.31 3.07 0.97 1.47 3.71 6.75 2.58
10066022 811 2x1½x1¼ CxCxC TEE 7.00 3.84 1.51 0.99 1.31 3.19 1.09 1.46 3.84 7.00 2.58
10066023 811 2x1½x1½ CxCxC TEE 7.75 4.35 1.51 1.37 1.31 3.57 1.31 1.76 4.35 7.75 2.58
10066024 811 2x1½x2 CxCxC TEE 7.75 4.17 1.51 1.37 1.31 3.57 1.51 1.37 4.17 7.75 2.58
*Cup Depth (Dim C,E,G) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D,F,H) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
Height Width Depth
Copper Tee
Dimensions shown in inches
Item No. Description A B C* D** F**
10075578 811 ½ CxCxC TEE 3.04 1.78 0.83 0.70 0.49 1.78 3.04 0.95
10075580 811 ¾ CxCxC TEE 3.47 2.17 0.92 0.82 0.64 2.17 3.47 1.24
10075582 811 1 CxCxC TEE 3.90 2.51 0.98 0.98 0.80 2.51 3.90 1.50
10075096 811 1¼ CxCxC TEE 4.12 2.94 1.09 0.98 0.98 2.94 4.12 1.75
10075098 811 1½ CxCxC TEE 4.75 3.43 1.31 1.07 1.07 3.43 4.75 2.11
10075100 811 2 CxCxC TEE 5.75 4.17 1.51 1.37 1.37 4.17 5.75 2.58
10057518
10062072 811 3 C XCXC COPPER TEE 7.95 6.39 2.10 1.88 2.24 6.40 7.95 3.68
10062077 811 4 C XCXC COPPER TEE 9.84 7.66 2.50 2.41 2.81 7.66 9.84 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
811 2½ CXCXC COPPER TEE
7.15 5.33 1.90 1.67 1.85 5.33 7.15 3.16
Height Width Depth
Small DiameterSmall Diameter Large Diameter
Large Diameter
For additional information, submittal sheets and manuals, visit www.apollovalves.com
54
www.apollovalves.com
APOLLO VALVES Customer Service (704) 841-6000
FITTINGS
Copper Reducing Run/Outlet Tee - Large Diameter
Dimensions shown in inches
Item No. Description A B C* D** E* F* G* H**
10066499 811 2x1½x2½ CxCxC TEE 11.99 5.33 1.51 4.53 1.31 4.65 1.90 1.85 5.33 11.99 3.16
10066595 811 2½x¾x2 CxCxC TEE 9.74 5.08 1.90 1.67 0.89 5.29 1.59 1.92 5.08 9.74 3.16
10066502 811 2½x¾x2½ CxCxC TEE 9.74 5.33 1.90 1.67 0.89 5.29 1.90 1.85 5.33 9.74 3.16
10066596 811 2½x1x2 CxCxC TEE 9.55 5.08 1.90 1.67 0.97 5.02 1.59 1.92 5.08 9.55 3.16
10066514 811 2½x1x2½ CxCxC TEE 9.55 5.33 1.90 1.67 0.97 5.02 1.90 1.85 5.33 9.55 3.16
10066504 811 2½x1¼x2½ CxCxC TEE 9.43 5.33 1.90 1.67 1.04 4.81 1.90 1.85 5.33 9.43 3.16
10066597 811 2½x1½x1½ CxCxC TEE 9.52 4.83 1.90 1.67 1.31 4.65 1.43 1.82 4.83 9.52 3.16
10066598 811 2½x1½x2 CxCxC TEE 9.52 5.08 1.90 1.67 1.31 4.65 1.59 1.92 5.08 9.52 3.16
10066507 811 2½x1½x2½ CxCxC TEE 9.52 5.33 1.90 1.67 1.31 4.65 1.90 1.85 5.33 9.52 3.16
10066599 811 2½x2x¾ CxCxC TEE 9.60 5.42 1.90 1.67 1.51 4.52 0.89 2.95 5.42 9.60 3.16
10066600 811 2½x2x1 CxCxC TEE 9.60 5.21 1.90 1.67 1.51 4.52 0.97 2.66 5.21 9.60 3.16
10066601 811 2½x2x1¼ CxCxC TEE 9.60 4.58 1.90 1.67 1.51 4.52 1.04 1.96 4.58 9.60 3.16
10066602 811 2½x2x1½ CxCxC TEE 9.60 4.83 1.90 1.67 1.51 4.52 1.43 1.82 4.83 9.60 3.16
10066603 811 2½x2x2 CxCxC TEE 9.60 5.08 1.90 1.67 1.51 4.52 1.59 1.92 5.08 9.60 3.16
10066174 811 2½x2x2½ CxCxC TEE 9.60 5.33 1.90 1.68 1.51 4.52 1.90 1.85 5.33 9.60 3.16
10066515 811 2½x2x3 CxCxC TEE 13.41 6.18 1.90 5.06 1.51 4.94 2.10 2.24 6.18 13.41 3.68
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
10066522 811 3x¾x2½ CxCxC TEE 10.77 5.90 2.10 1.88 0.89 5.91 1.90 2.16 5.90 10.77 3.68
10066523 811 3x¾x3 CxCxC TEE 10.77 6.18 2.10 1.88 0.89 5.91 2.10 2.24 6.18 10.77 3.68
10066524 811 3x1x2½ CxCxC TEE 10.58 5.90 2.10 1.88 0.97 5.64 1.90 2.16 5.90 10.58 3.68
10066525 811 3x1x3 CxCxC TEE 10.58 6.18 2.10 1.88 0.97 5.64 2.10 2.24 6.18 10.58 3.68
10066526 811 3x1¼x3 CxCxC TEE 10.45 6.18 2.10 1.87 1.04 5.43 2.10 2.24 6.18 10.45 3.68
10066527 811 3x1½x3 CxCxC TEE 10.55 6.18 2.10 1.87 1.31 5.27 2.10 2.24 6.18 10.55 3.68
10066604 811 3x2x2 CxCxC TEE 10.42 5.59 2.10 1.87 1.51 4.94 1.59 2.17 5.59 10.42 3.68
10066529 811 3x2x2½ CxCxC TEE 10.42 5.90 2.10 1.88 1.51 4.94 1.90 2.16 5.90 10.42 3.68
10066530 811 3x2x3 CxCxC TEE 10.42 6.18 2.10 1.87 1.51 4.94 2.10 2.24 6.18 10.42 3.68
10066605 811 3x2½x2 CxCxC TEE 10.93 5.59 2.10 1.87 1.90 5.06 1.59 2.17 5.59 10.93 3.68
10066136 811R 3X2½X2½ C XCXC COPPER TEE 10.93 5.90 2.10 1.88 1.90 5.06 1.90 2.16 5.90 10.93 3.68
10066137 811R 3X2½X3 CXCXC COPPER TEE 10.93 6.18 2.10 1.87 1.90 5.06 2.10 2.24 6.18 10.93 3.68
10066538 811 4x1½x3 CxCxC TEE 13.07 7.28 2.50 2.42 1.31 6.84 2.10 2.81 7.28 13.07 4.70
10066539 811 4x2x4 CxCxC TEE 12.96 7.66 2.50 2.42 1.51 6.54 2.50 2.81 7.66 12.96 4.70
10066138 811R 4X2
10066606 811 4x3x1½ CxCxC TEE 13.24 6.35 2.50 2.42 2.10 6.23 1.43 2.57 6.35 13.24 4.70
10066607 811 4x3x2 CxCxC TEE 13.24 6.60 2.50 2.42 2.10 6.23 1.59 2.67 6.60 13.24 4.70
10066139 811R 4X3X2½ CXCXC COPPER TEE 13.22 6.91 2.50 2.42 2.10 6.20 1.90 2.66 6.91 13.22 4.70
10066096 811 4x3x3 CxCxC TEE 13.22 7.28 2.50 2.42 2.10 6.20 2.10 2.83 7.28 13.22 4.70
10066140 811R 4X3X4 CXCXC COPPER TEE 13.24 7.64 2.50 2.42 2.10 6.23 2.50 2.81 7.64 13.24 4.70
*Cup Depth (Dim C,E,G) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D,F,H) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
½X4 CXCXC COPPER TEE 13.23 7.66 2.50 2.42 1.90 6.41 2.50 2.81 7.66 13.23 4.70
Height Width Depth
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
55
FITTINGS
Copper Bullhead Tee
Large DiameterSmall Diameter
Dimensions shown in inches
Item No. Description A B C* D** E* F**
10066070 811 ½x½x¾ CxCxC BH TEE 5.70 2.17 0.81 2.04 0.92 0.64 2.17 5.70 1.24
10066006 811 ½x½x1 CxCxC BH TEE 6.69 2.51 0.81 2.54 0.98 0.80 2.51 6.69 1.50
10066071 811 ¾x¾x1 CxCxC BH TEE 6.38 2.51 0.85 2.35 0.98 0.80 2.51 6.38 1.50
10066008 811 1x1x1¼ CxCxC BH TEE 6.75 2.94 0.93 2.45 1.09 0.98 2.94 6.75 1.75
10066128 811 1x1x2 CxCxC BH TEE 10.05 4.16 0.97 4.06 1.51 1.37 4.16 10.05 2.58
10066107 811 1¼x1¼x2 CxCxC BH TEE 9.42 4.16 1.04 3.67 1.51 1.37 4.16 9.42 2.58
10066090 811 1½x1½x2 CxCxC BH TEE 9.75 4.16 1.31 3.57 1.51 1.37 4.16 9.75 2.58
10066550 811 1½x1½x3 CxCxC BH TEE 13.15 6.18 1.31 5.27 2.10 2.24 6.18 13.15 3.68
10066551 811 2x2x3 CxCxC BH TEE 12.89 6.18 1.51 4.94 2.10 2.24 6.18 12.89 3.68
10066135 811 2½x2½x3 CxCxC BH TEE 13.92 6.18 1.90 5.06 2.10 2.24 6.18 13.92 3.68
10066094 811 2½x2½x4 CxCxC BH TEE 16.98 7.66 1.90 6.79 2.50 2.81 7.66 16.98 4.70
*Cup Depth (Dim C&E) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
Height Width Depth
Copper & Low Lead Brass Female Outlet Tee
Dimensions shown in inches
Item No. Description A B C* D** F Height Width Depth
10066579 8712 ½ CxCxF TEE 3.04 2.65 0.83 0.70 2.18 2.65 3.04 1.01
10066580 8712 ¾ CxCxF TEE 3.47 3.14 0.92 0.82 2.52 3.14 3.47 1.25
Reducing Female Outlet Tee
10066581 8712 ¾x¾x½ CxCxF TEE 3.13 3.01 0.92 0.65 2.39 3.01 3.13 1.24
10066582 8712 1x1x½ CxCxF TEE 3.67 3.35 0.98 0.86 2.61 3.35 3.67 1.48
10066583 8712 1x1x¾ CxCxF TEE 3.67 3.42 0.98 0.86 2.67 3.42 3.67 1.48
10066584 8712 1¼x1¼x½ CxCxF TEE 4.12 4.04 1.09 0.98 3.16 4.04 4.12 1.75
10066585 8712 1¼x1¼x¾ CxCxF TEE 4.12 4.10 1.09 0.98 3.23 4.10 4.12 1.75
10066586 8712 1½x1½x½ CxCxF TEE 4.00 4.01 1.31 0.69 2.96 4.01 4.00 2.11
10066587 8712 1½x1½x¾ CxCxF TEE 4.00 4.08 1.31 0.69 3.02 4.08 4.00 2.11
10066588 8712 2x2x½ CxCxF TEE 4.39 4.57 1.59 0.61 3.30 4.57 4.39 2.58
10066589 8712 2x2x¾ CxCxF TEE 4.39 4.64 1.59 0.61 3.36 4.64 4.39 2.58
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
For additional information, submittal sheets and manuals, visit www.apollovalves.com
56
www.apollovalves.com
APOLLO VALVES Customer Service (704) 841-6000
FITTINGS
Copper Tube Cap
Dimensions shown in inches
Item No. Description A B C*
10075166 817 ½ TUBE CAP 1.13 0.95 0.85 0.95 1.13 0.95
10075168 817 ¾ TUBE CAP 1.19 1.24 0.89 1.24 1.19 1.24
10075170 817 1 TUBE CAP 1.35 1.49 0.97 1.49 1.35 1.49
10075172 817 1¼ TUBE CAP 1.53 1.75 1.09 1.75 1.53 1.75
10075174 817 1½ TUBE CAP 1.80 2.11 1.22 2.11 1.80 2.11
10075176 817 2 TUBE CAP 2.15 2.58 1.51 2.58 2.15 2.58
10062142 817 2
10062147 817 3 COPPER TUBE CAP 4.07 3.68 2.10 3.68 4.07 3.68
10062152 817 4 COPPER TUBE CAP 4.96 4.70 2.50 4.70 4.96 4.70
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
½ C
OPPER TUBE CAP 3.64 3.16 1.90 3.16 3.64 3.16
Height Width Depth
Copper Crossover
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
Small Diameter
Large Diameter
Large DiameterSmall Diameter
Dimensions shown in inches
Item No. Description A B C* D** F**
10075370 836 ½ CxC CROSSOVER 4.50 1.54 0.81 1.44 0.75 1.54 4.50 0.95
10075372 836 ¾ CxC CROSSOVER 5.50 2.06 0.84 1.91 1.00 2.06 5.50 1.24
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 3/4” +/- .045
**Lay-in (Dim D&F) Tolerance : Sizes 1/2” - 3/4” +.07/-.03
Height Width Depth
Copper Large Diameter Flange
Dimensions shown in inches
Item No. Description A B C*
125 Lb.
10075702 8741 2 Copper 125 lb. 6.00 3.67 1.59 3.67 6.00 6.00
10061761 8741 2½ Copper 125 lb. 7.00 3.62 1.90 3.62 7.00 7.00
10061767 8741 3 Copper 125 lb. 7.50 3.61 2.10 3.61 7.50 7.50
10061736 8741 4 Copper 125 lb. 9.00 3.76 2.50 3.76 9.00 9.00
150 Lb.
10061763 8771 2½ Copper 150 lb. 7.00 3.62 1.90 3.62 7.00 7.00
10061769 8771 3 Copper 150 lb. 7.50 3.61 2.10 3.61 7.50 7.50
10061738 8771 4 Copper 150 lb. 9.00 3.76 2.50 3.76 9.00 9.00
*Cup Depth (Dim C) Tolerance : Size 2” +/- .045, Sizes 2-1/2” - 4” +/-.015
www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181
Height Width Depth
57
FITTINGS
Copper Fitting Reducer
Large DiameterSmall Diameter
Dimensions shown in inches
Item No. Description A B C* D** E**
10075146 818 ¾x½ FTGxC RED 2.03 0.95 0.81 1.22 0.98 0.95 2.03 0.95
10075150 818 1x½ FTGxC RED 2.37 1.25 0.81 1.56 1.10 1.25 2.37 1.25
10075148 818 1x¾ FTGxC RED 2.22 1.25 0.85 1.37 1.10 1.25 2.22 1.25
10075336 818 1¼x½ FTGxC RED 2.83 1.38 0.85 1.98 1.27 1.38 2.83 1.38
10075154 818 1¼x¾ FTGxC RED 2.69 1.38 0.85 1.84 1.34 1.38 2.69 1.38
10075156 818 1¼x1 FTGxC RED 2.40 1.50 0.91 1.48 1.23 1.50 2.40 1.50
10075332 818 1½x½ FTGxC RED 3.19 1.63 0.81 2.38 1.43 1.63 3.19 1.63
10075334 818 1½x¾ FTGxC RED 3.22 1.63 0.89 2.33 1.40 1.63 3.22 1.63
10075158 818 1½x1 FTGxC RED 2.93 1.63 0.93 2.00 1.53 1.63 2.93 1.63
10075160 818 1½x1¼ FTGxC RED 2.69 1.75 1.04 1.65 1.31 1.75 2.69 1.75
10075338 818 2x½ FTGxC RED 4.04 2.13 0.85 3.19 1.83 2.13 4.04 2.13
10075340 818 2x¾ FTGxC RED 3.87 2.13 0.89 2.99 1.83 2.13 3.87 2.13
10075162 818 2x1 FTGxC RED 3.66 2.13 0.97 2.69 1.83 2.13 3.66 2.13
10075152 818 2x1¼ FTGxC RED 3.34 2.13 1.04 2.30 1.60 2.13 3.34 2.13
10075164 818 2x1½ FTGxC RED 3.51 2.13 1.31 2.20 1.77 2.13 3.51 2.13
10068025 818 2½x½ FTGxC RED 4.59 2.63 0.85 3.74 2.00 2.63 4.59 2.63
10068001 818 2½x¾ FTGxC RED 4.50 2.63 0.89 3.61 2.00 2.63 4.50 2.63
10068002 818 2½x1 FTGxC RED 4.31 2.63 0.97 3.34 2.00 2.63 4.31 2.63
10068017 818 2½x1¼ FTGxC RED 4.18 2.63 1.04 3.14 2.00 2.63 4.18 2.63
10068004 818 2½x1½ FTGxC RED 4.28 2.63 1.31 2.97 2.00 2.63 4.28 2.63
10075165 818 2½x2 FTGxC RED 4.36 2.63 1.51 2.85 2.30 2.63 4.36 2.63
10068005 818 3x½ FTGxC RED 5.01 3.13 0.85 4.16 2.27 3.13 5.01 3.13
10068019 818 3x¾ FTGxC RED 4.92 3.13 0.89 4.03 2.27 3.13 4.92 3.13
10068007 818 3x1 FTGxC RED 4.73 3.13 0.97 3.76 2.27 3.13 4.73 3.13
10068008 818 3x1¼ FTGxC RED 4.60 3.13 1.04 3.56 2.27 3.13 4.60 3.13
10068020 818 3x1½ FTGxC RED 4.70 3.13 1.31 3.39 2.27 3.13 4.70 3.13
10068010 818 3x2 FTGxC RED 4.57 3.13 1.51 3.06 2.26 3.13 4.57 3.13
10057500 818 3x2½ FTGxC RED 5.09 3.16 1.90 3.19 2.51 3.16 5.09 3.16
10068011 818 4x½ FTGxC RED 6.02 4.13 0.85 5.17 2.80 4.13 6.02 4.13
10068022 818 4x¾ FTGxC RED 5.93 4.13 0.89 5.04 2.80 4.13 5.93 4.13
10068013 818 4x1 FTGxC RED 5.74 4.13 0.97 4.77 2.80 4.13 5.74 4.13
10068014 818 4x1¼ FTGxC RED 5.61 4.13 1.04 4.57 2.80 4.13 5.61 4.13
10068023 818 4x1½ FTGxC RED 5.75 4.13 1.31 4.44 2.80 4.13 5.75 4.13
10068016 818 4x2 FTGxC RED 5.60 4.13 1.51 4.09 2.76 4.13 5.60 4.13
10057503 818 4x2½ FTGxC RED 6.02 4.13 1.90 4.12 2.67 4.13 6.02 4.13
10057506 818 4x3 FTGxC RED 5.90 4.13 2.10 3.81 2.65 4.13 5.90 4.13
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03, Sizes 2-1/2”- 3” +.12/-.03, Size 4” +.15/-.03
***Fit End (Dim E) Tolerance : Sizes 1/2” - 1” +.06/-.00, Sizes 1-1/4” - 2” +.09/-.00, Sizes 2-1/2”- 4” +.12/-.00
Height Width Depth
Lead Free Brass Female Union
Dimensions shown in inches
Item No. Description A B C* D**
10075872 8733-3 ½ CxF UNION 2.14 1.25 0.76 1.39 1.25 2.14 1.25
10075874 8733-3 ¾ CxF UNION 2.88 1.52 0.92 1.96 1.52 2.88 1.52
10075876 8733-3 1 CxF UNION 2.88 1.94 0.92 1.96 1.94 2.88 1.94
10075878 8733-3 1¼ CxF UNION 3.16 2.19 1.04 2.12 2.19 3.16 2.19
10075880 8733-3 1½ CxF UNION 3.09 2.45 1.43 1.66 2.45 3.09 2.45
10075882 8733-3 2 CxF UNION 3.33 3.12 1.59 1.75 3.12 3.33 3.12
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
Height Width Depth
Lead Free Brass Male Union
Dimensions shown in inches
Item No. Description A B C* D**
10075884 8733-4 ½ CxM UNION 2.90 1.26 0.76 2.15 1.26 2.90 1.26
10075886 8733-4 ¾ CxM UNION 3.42 1.52 0.92 2.51 1.52 3.42 1.52
10075888 8733-4 1 CxM UNION 3.74 1.94 0.92 2.83 1.94 3.74 1.94
10075890 8733-4 1¼ CxM UNION 3.78 2.19 1.04 2.73 2.19 3.78 2.19
10075892 8733-4 1½ CxM UNION 3.73 2.45 1.43 2.30 2.45 3.73 2.45
10075894 8733-4 2 CxM UNION 4.24 3.12 1.59 2.65 3.12 4.24 3.12
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
Height Width Depth
Lead Free Brass Union
Dimensions shown in inches
Item No. Description A B C* D**
10075860 8733 ½ CxC UNION 2.99 1.26 0.76 1.48 1.26 2.99 1.26
10075862 8733 ¾ CxC UNION 3.69 1.52 0.92 1.86 1.52 3.69 1.52
10075864 8733 1 CxC UNION 3.83 1.94 0.92 2.00 1.94 3.68 1.94
10075866 8733 1¼ CxC UNION 3.83 2.19 1.04 1.74 2.19 3.83 2.19
10075868 8733 1½ CxC UNION 3.95 2.45 1.43 1.04 2.45 3.95 2.45
10075870 8733 2 CxC UNION 4.65 3.12 1.59 1.48 3.12 4.65 3.12
*Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045
**Lay-in (Dim D) Tolerance : Sizes 1/2” - 3/4” +.07/-.03, Sizes 1” - 2” +.09/-.03
Height Width Depth
For additional information, submittal sheets and manuals, visit www.apollovalves.com
58
www.apollovalves.com
APOLLO VALVES Customer Service (704) 841-6000
Loading...