How it Works
Apollo Conbraco
Loading...
86B-100
User Manual
4 pgs838.67 Kb0

Apollo Conbraco 86B-100 User Manual

Download
86B-100 SERIES
STAINLESS STEEL 3-PIECE FULL PORT CLASS 600 NPT BALL VALVE
STANDARD COMPLIANCE
• Valve Design: ASME B16.34, Class 600, NACE MR0175 (2000) & MR0103 (2012), API 608
FEATUR E S
• 3-piece construction w/ enclosed fasteners
• Full port
• Stainless steel trim & hardware
• Swing-out center section
• Pressure balanced solid ball
• Compression controlled spiral wound gaskets
• Anti-blowout one piece bottom entry stem
• Statically grounded ball, stem, & body
• End Connections: NPT per ASME B1.20.1
• Valve Marking: ASME B16.3
• Production Testing: ASME B16.34
• Two-position locking
• Adjustable multi-piece PTFE “V” style packing
• Fully machined ISO 5211 mounting
• Cast bosses on the center-section and end caps for bleed & drain ports
• Fire safe to API 607 (requires -24 sux)
• Vacuum service to 29 in of Hg.
• CE Marking, 1-1/4” and larger (add “-CE” sux)
• 250 psig saturated steam
• CGA 3.16-M88 (2014)
OPTIONS AVAILABLE
(MORE INFORMATION IN SECTION J)
• Minimum quantities apply
• To specify an option, re place the “01” st andar d sux with the sux of the optio n.
• To specify multiple options, replace th e “01” sux with th e desire d suxes in the numer ical ord er shown b elow. NOTE : Not all su xes can be combined toge ther.
(SUFFIX) OPTION SIZES
-01 Standard Configuration All
-P -01 - BSPP (Parallel) Thread Connection All
-T -01- BSPT (Tapered) Thread Connection All
-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated) All
-14- Vented Ball All
STANDARD MATERIAL LIST
PART MATERIAL
Body ASTM A351-CF8M
1
End Caps ASTM A351-CF3M
2
Ball ASTM A276-316SS
3
Stem
4
Seat Multi-Seal
5
Packing PTFE
6
Stem Bearing PEEK/PTFE
7
Body Gasket PTFE Spiral Wound
8
Body Bolts A STM A193-Gr.B8M3
9
Body Nut s ASTM A194-Gr.8
10
Stop Bolts 18 -8 Stainless Steel
11
Gland Bolts ASTM A193 -Gr.B 8
12
Handle Nut/Screw 300 Series Stainless Steel
13
Packing Gland ASTM A276-316SS
14
Gland Plate 300 Series Stainless Steel
15
Lever Handle 300 Serie s Stainless Steel
16
Lock Plate 300 Series Stainless Steel
17
Stops 300 Series Stainless Steel
18
Internal Grounding Spring 300 Series Stainless Steel
19
External Grounding Spring 300 Series Stainless Steel
20
Pressure/Temperature Ratings - Page M-20, Graph No. 26
ASTM A276-316SS ASTM A564 17-4PH
(2” with -38 sux)
-15- Stainless Steel Locking Round Handle All
-21- UHMWPE Seats w/ Graphite Seals All
Graphite Packing, Spiral Wound Graphite Body Seal, PTFE/PEEK
-24-
-38- Peek Seats, Graphite Stem Packing & Gasket s All
-49- No Lubrication. Assembled Dry All
-57- Cleaned for Oxygen Service All
-62- Center Section Only All
-63- NPT x Socketweld All
-69- Drilled & Tapped Purge & Drains All
-70- 4” Extended Bonnet All
-76- Live Loaded (Lever Operated) All
-77- Live Loaded (Actuated) All
-90- Double Packed 4” Extended Bonnet All
-9P- Double Packed 4” Extended Bonnet w/ Monitoring Port All
-CE- CE Marking 1-1/4” to 1”
-EF- Graphite Packing (API 641 Compliant) 3/4” to 2”
-EP-
-KF- PCTFE Stem Bearing All
-SR- Spring Return Handle 1/4” to 1”
-UA- AIS (American Iron & Steel) Compliant All
- U L- UL Listed All
-ZP1 - Fugitive Emissions Packing (Viton) All
-ZP2 - Fugitive Emissions Packing (Buna-N) All
-ZP3- Fugitive Emissions Packing (Kalrez) All
Bearing (Fire Safe API 607, 6th Edition, ISO 10497:2010)
Garlock EVSP Stem Packing w/ Spiral Wound
Graphite Gasket (Fire Safe by Design)
DIMENSIONS
PART NO. SIZE A B C D E F G H J K L M N P WT.
86B-101-01 1/4 ” 0.37 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 10-24 2.3 86B-102-01 3/8 0.50 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 1 0-24 2.3 86B-103-01 1/2” 0.50 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 10-24 2.3 86B-104-01 3/4” 0.75 3.68 1.10 5.53 3.40 2.40 1.20 1.65 2.35 0.24 0.312 0.500 1.392 1/4-20 4.0 86B-105-01 1” 1.00 4.19 1.31 6.53 4.80 2.67 1.34 1.80 2.80 0.48 0.287 0.500 1.392 1 /4-20 5.7 86B-106-01 1-1 /4” 1.50 4.50 1.97 6.65 4.70 3.84 1.92 2.49 3.89 0.72 0.412 0.625 1.949 5/16-18 14.2 86B -107- 01 1-1/2 ” 1.50 4.98 1.97 6.65 4.70 3.84 1.92 2.49 3.89 0.72 0.412 0.625 1.949 5/16-18 14.4 86B-108-01 2” 2.00 5.86 2.56 8.40 5.47 4.56 2.46 3.17 4.74 0.80 0.477 0.750 1.949 5/16-18 24.4
REV. 17SEP19
All
All
Customer Service (704) 841-6000 industrial.apollovalves.com B-31
FLOW DATA
FLOW DATA
The listed Cv “factors” are derived from actual flow testing, at Apollo’s Pageland, South Carolina factory. These tests were completed using standard “o the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure dierential across the valve/connection unit. Line pressure is not a factor. Because the C formula can be used to estimate flow of most media for valve sizing.
is a factor, the
v
FLOW OF LIQUID
Q = C
or ∆P =
V
(Q)2 (SpGr)
WHERE:
• Q = Flow in US gpm
• ∆P = Pressure drop (psig)
• SpGr = Specific gravity at flowing temperature
• C
= Valve constant
v
√
(C
∆P
SpGr
2
)
v
FLOW OF GAS
Q = 1360 C
or ∆P =
V
5.4 x 10
(∆P) (P
(SpGr) (T)
√
-7
(SpGr) (T) (Q)
2)
(Cv)2 (P2)
WHERE:
• Q = Flow in SCFH
• ∆P = Pressure drop (psig)
• SpGr = Specific gravity (based on air = 1.0)
• P2 = Outlet pressure–psia (psig + 14.7)
• T = (temp. °F + 460)
• C
= Valve constant
v
CAUTION: The gas equation shown, is valid at very low pressure drop ratios.
The gas equation is NOT valid when the ratio of pressure drop (∆ P) to inlet
NOTE: Only use the gas equation shown if (P1- P2)/P1 is less than 0.02 .
pressure (P1) exceeds 0.02.
CV FACTORS FOR APOLLO VALVES (CONTINUED ON M-4)
VALVE
70B-140 Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- -- -- --
70-100/200 Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- -- -- ---
70-30 0/400 Series -- -- 15 30 43 48 84 108 -- -- -- -- -- -- --
70-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- --
70-800 Series 8.4 7. 2 15 30 43 48 84 -- -- -- -- -- -- -- --
71-AR Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- --
71-100/200 Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- --
72-100/900 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --
72-1xx-A/72-9xx-A Series -- -- 26 48 65 125 170 245 -- -- -- -- -- -- --
73A-100 Series 8.4 7. 2 15 30 43 48 84 108 -- -- -- -- -- -- --
73-30 0/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --
74-100 Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- -- -- --
75-10 0 Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- -- -- --
76-AR Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- -- -- --
76F-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --
76FJ-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --
76FK-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --
76-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --
76-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --
76-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- --
76J-100 Series 8.4 7. 2 15 30 43 48 84 108 190 370 -- -- -- -- --
76J-AR Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- --
76K-100 Series 8.4 7. 2 15 30 43 48 84 108 190 370 -- -- -- -- --
76K-AR Series 8.4 7. 2 15 30 43 48 84 108 190 370 670 -- --
7K-100 Series -- -- 15 51 68 125 177 389 503 -- -- -- -- -- --
77-AR Series 8.1 15 15 51 68 -- 177 389 -- -- -- -- -- -- --
1/4 3/8 1/2 3/4 1 1.25 1.5 2 2.5 3 4 6 8 10 12
SIZE (IN.)
-- --
REV. 21APR17
2
Customer Service (704) 841-6000 industrial.apollovalves.com M-3
FLOW DATA
FOR APOLLO BALL VALVES
CV FACTORS FOR APOLLO VALVES (CONTINUED FROM M-3)
VALVE
77C-10 0/200 Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- --
77D-140 Series 4.5 7. 2 16 36 68 125 177 389 -- -- -- -- -- -- --
77D- 640 Series -- -- -- 11 24 35 -- -- -- -- -- -- -- -- --
77G-UL Serie s 4.5 7. 2 16 36 68 125 177 389 503 -- -- -- -- -- --
77W Series -- -- 16 36 68 125 177 389 -- -- -- -- -- -- --
77-100/200 Series 8.1 15 15 51 68 125 177 389 503 -- -- -- -- -- --
79 Series 8.5 8.5 9.8 32 44 66 148 218 440 390 -- -- -- -- --
80 Series 8.4 7. 2 15 30 43 48 84 108 190 370 -- -- -- -- --
82-100/200 Series 8.1 14 26 51 68 120 170 376 510 996 1893 -- -- -- --
83A/83B Series 8.1 14 26 51 68 120 170 376 -- -- -- -- -- -- --
83R-100/200 Series -- -- -- -- -- -- 170 376 -- 996 1893 -- -- -- --
86A/86B Series 8.1 14 26 51 68 120 170 376 -- -- -- -- -- -- --
86R-100/200 Series -- -- -- -- -- -- 170 376 -- 996 1893 -- -- -- --
87A-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
87A-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87A-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
87A-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87A-F00 Series -- -- -- -- 75 -- 195 410 545 1021 2016 4837 -- -- --
87B-10 0 Series -- -- -- -- -- -- -- -- -- 375 673 1099 1902 3890 --
87J-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
87J-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87J-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
87J-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87K-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890
87K-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87K-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
87K-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
88A-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --
88A-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-F00 Series -- -- -- -- 75 -- 195 410 545 1021 2016 4837 -- -- --
88B-100 Series -- -- -- -- -- -- -- -- -- 375 673 1099 1902 3890 --
89-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --
9A-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --
90-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --
92-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --
93-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --
94A-100/200 Series 6 7 19 34 50 104 268 309 629 1018 1622 -- -- -- --
96-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --
399-100 Series 8.4 7. 2 15 30 43 48 84 108 190 370 -- -- -- -- --
489-100 Series 8.4 7. 2 15 30 43 48 84 108 190 370 -- -- -- -- --
1/4 3/8 1/2 3/4 1 1.25 1.5 2 2.5 3 4 6 8 10 12
SIZE (IN.)
--
Customer Service (704) 841-6000 industrial.apollovalves.comM-4
PRESSURE/TEMPERATURE RATINGS
ENGINEERING DATA
ASME CLASS 600 (CS) ASTM A216-WCB GRAPH 25
ASME CLASS 600 (SS) ASTM A351-CF8M GRAPH 26
Customer Service (704) 841-6000 industrial.apollovalves.comM-20
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use