Apollo Conbraco 83A-140 User Manual

83A-140 Series
3-Piece Full Port Carbon Steel 1500 CWP
NPT Ball Valve
Standard Compliance - Valve design: MSS SP-110, End Connections: NPT per ASME B1.20.1,
Valve Marking: MSS SP-25, Production Testing: MSS SP-110, NACE MR0175, 2000 edition.
FEATURES
• 3-Piece construction w/ enclosed fasteners • Two-position locking
• Stainless steel trim & hardware • Fully machined ISO 5211 mounting
• Swing-out center section • Cast bosses on the center-section and end caps
• Pressure balanced solid ball for bleed & drain ports
• Compression controlled RPTFE gaskets • Vacuum service to 29 in of Hg.
• Anti-blowout one piece bottom entry stem • 150 psig saturated steam
STANDARD MATERIAL LIST
1. Body ASTM A216-WCB 10. Body Nuts 18-8 Stainless Steel
2. End Caps ASTM A216-WCB 11. Stop Bolts 18-8 Stainless Steel
3. Ball ASTM A276-316SS 12. Gland Bolts 18-8 Stainless Steel
4. Stem ASTM A276-316SS 13. Handle Nut/Screw 300 Series Stainless Steel
5. Seat Multi-Seal 14. Packing Gland ASTM A276-316SS
6. Packing PTFE 15. Gland Plate 300 Series Stainless Steel
7. Stem Bearing PEEK/PTFE 16. Lever Handle 300 Series Stainless Steel
8. Body Gasket RPTFE 17. Lock Plate 300 Series Stainless Steel
9. Body Bolts 18-8 Stainless Steel 18. Stops 300 Series Stainless Steel
OPTIONS AVAILABLE:
(SUFFIX) OPTION SIZES
-04- 2-1/4” Stem Extension 1/4” to 2”
-14- Vented Ball (see page J-2) 1/4” to 2”
-15- Round Handle 1/4” to 2”
-49- Assembled Dry 1/4” to 2”
-60- Static Grounding 1/4” to 2”
-62- Center Section Only 1/4” to 2”
-63- NPT x Socketweld 1/4” to 2”
-67- Cleaned for Industrial Gases 1/4” to 2”
-69- Drilled & Tapped Purge & Drains 1/4” to 2”
-70- Extended Bonnet 1/4” to 2”
-76- Live Loaded (Lever Operated) 1/4” to 2”
-77- Live Loaded (Actuated) 1/4” to 2”
-90- Extended Bonnet w/ Double Packing 1/4” to 2”
-SR- Spring Return Handle 1/4” to 1”
-P01- BSPP (Parallel) Thread Connection 1/4” to 2”
-T01- BSPT (Tapered) Thread Connection 1/4” to 2”
For Pressure/Temperature Ratings,
Refer to Page M-17, Graph No. 23
CARBON STEEL 3-PIECE FULL PORT BALL VALVE
NUMBER SIZE ABC D EF G H J K L M N P WT.
83A-141-01 1/4” .37 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 10-24 2.3 83A-142-01 3/8” .50 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 10-24 2.3 83A-143-01 1/2” .50 2.80 0.89 5.12 3.02 2.02 1.01 1.39 1.97 0.23 0.245 0.375 1.00 10-24 2.3 83A-144-01 3/4” 0.75 3.68 1.10 5.53 3.40 2.40 1.20 1.65 2.35 0.24 0.312 0.500 1.392 1/4-20 4.0 83A-145-01 1” 1.00 4.19 1.31 6.53 4.80 2.67 1.34 1.80 2.80 0.48 0.287 0.500 1.392 1/4-20 5.7 83A-146-01 1-1/4” 1.50 4.50 1.97 6.65 4.70 3.84 1.92 2.49 3.89 0.72 0.412 0.625 1.949 5/16-18 14.2 83A-147-01 1-1/2” 1.50 4.98 1.97 6.65 4.70 3.84 1.92 2.49 3.89 0.72 0.412 0.625 1.949 5/16-18 14.4 83A-148-01 2” 2.00 5.86 2.56 8.40 5.47 4.92 2.46 3.17 4.74 0.80 0.477 0.750 1.949 5/16-18 27.6
COPYRIGHT ©2011 APOLLO VALVES, MANUFACTURED BY CONBRACO INDUSTRIES – PRINTED IN U.S.A.
B-5
M-1
COPYRIGHT ©2011 APOLLO VALVES, MANUFACTURED BY CONBRACO INDUSTRIES – PRINTED IN U.S.A.
FLOW DATA
For Apollo®Ball Valves
The listed Cv “factors” are derived from actual flow testing, in the Apollo®Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing.
Flow of Liquid
Q = Cv ΔP
SpGr
or ΔP = (Q)2(SpGr)
(Cv)
2
Flow of Gas
Q = 1360 Cv (ΔP) (P1)
(SpGr) (T)
or ΔP = 5.4 x 10-7(SpGr) (T) (Q)
2
(Cv)2 (P2)
Where:
Q = flow in SCFH
ΔP = pressure drop (psig)
SpGr = specific gravity
(based on air = 1.0)
P
2
= outlet pressure–psia
(psig + 14.7)
T = (temp. °F + 460)
Cv = valve constant
Where:
Q = flow in US gpm
ΔP = pressure drop (psig)
SpGr = specific gravity at
flowing temperature
Cv = valve constant
Cv FACTORS FOR APOLLO VALVES
Valve Size (inches) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12
Ball Valves
32-100/200 Series 5.1 6.6 8 24 30 45 55 95 -- -- -- -- -- -- -­64-100/200 Series 6 7 19 34 50 104 268 309 629 1018 1622 -- -- -- -­64W Series -- -- -- -- -- -- -- -- 629 1018 1622 -- -- -- -­70B-140 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­70-100/200 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­70-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- -­70-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- -­70-800 Series 8.4 7.2 15 30 43 48 84 -- -- -- -- -- -- -- -­71AR Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- -­71-100/200 Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- -­72-100/900 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- -­73A-100 Series 8.4 7.2 15 30 43 48 84 108 -- -- -- -- -- -- -­73-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- -­74-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­75-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­76AR Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­76F-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- -­76-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- -­76-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- -­76-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- -­7K-100 Series -- -- 15 51 68 125 177 389 503 -- -- -- -- -- -­77AR Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- -­77C-100/200 Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- -­77D-140 Series 4.5 7.2 16 36 68 125 177 389 -- -- -- -- -- --
-­77D-640 Series -- -- -- 11 24 35 -- -- -- -- -- -- -- -- -­77G-UL Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- -­77W Series -- -- 16 36 68 125 177 389 -- -- -- -- -- -- -­77X Series -- -- 16 36 68 -- -- -- -- -- -- -- -- -- -­77-100/200 Series 8.1 15 15 51 68 125 177 389 503 -- -- -- -- -- --
Loading...
+ 2 hidden pages