Apollo Conbraco 77W-A User Manual
SUBMIT TA L
ON
OFF
R
CONBRACO
IND., INC.
U.S.A. X
C
ON
OFF
R
CONBRACO
IND., INC.
U.S.A. X
77W10601A
(1-1/ 4")
77W10701A
(1-1/2" )
77W10801A
(2")
A
E
D
2
3
3
4
4
5
5
6
7
8
9
10
SHEET
77W-A Series
Press End Bronze Ball Valve
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
DESCRIPTION
The APOLLOPRESS® 77W-A Series ball valve is ideal for installation in heating, cooling and non-potable plumbing systems. Now with Leak Before Press®
feature and 300 psig maximum working pressure.
FEATU R E S
• Heavy Pattern Cast DZR Bronze Body
• Full-Port Flow
• Adjustable Stem Packing
• Fast, Reliable, Economical Press Installation
• Ridgid® XL Press Tool Compatible
• Leak Before Press® Technology
• Blowout-Proof Stem
• Corrosion Resistant Materials
• 100% Factory Tested
• Silicone Free Assembly
• Made in USA, ARRA Compliant
PERFORMANCE RATING†
• Maximum Operating Pressure: 300 psi
• Temperature Range: 0°F - 250°F
†APOLLOPRESS® connectors are designed for direct
mechanical connection to ASTM B88-Type K, L, and M
copper tubing in the hard drawn condition. Press connectors
are not suitable for steam or flammable gas service.
.
DIMENSIONS
DIMENSIONS (IN.)
PART
NUMBER
SIZE
(IN.)
A B C D E
77W-10301-A 1/2" 0.5 1.5 3.01 1.71 3.86 0.62
77W-10401-A 3/4 " 0.75 1.9 3.8 1.91 3.86 1.2
77W-10501-A 1" 1 2.25 4.50 2.13 4.76 2.04
77W-1 0601 -A 1- 1/4 " 1.25 2.4 4.8 2.46 4.76 2.83
7 7W-1070 1-A 1-1/2" 1.5 2.86 5.72 2.9 5.41 4.54
77W-10801-A 2" 2 3.4 6.8 3.68 7.76 7. 54
APPROVALS
• MSS SP-110 Ball Valves
• IAPMO/ANSI Z1157
APPROVED APPLICATIONS
• Water, Chilled and Hot: 33° - 250°F
• Hydronic Heating (90% glycol max)
• Low Pressure Steam, 15 psi max
• Not Suitable for Flammable Gas Service
• Not Compatible with Soft Annealed Copper Tubing
Not intended for potable water in USA
OPTIONS
• (-04) 2-1/4” Stem Extension
• (-07) Tee-Handle
• (-10) Stainless Steel Handle and Nut
• (-11) Therma-Seal™ Insulating Tee Handle
• (-27) 304SS Locking Handle NEW!
• (-50) 2-1/4” Locking Extension
• (-92) Standard Lever with Balancing Stop
• (-94) 2-1/4” Stem Extension and Balancing Stop
• (-HC) Press x 3/4” Hose w/ Cap & Chain (1/2” & 3/4”)
• (77W-140 Series) 316 SS Ball & Stem
• (77WLF Series) Lead Free (0.25% Lead Max)
WT.
(LB.)
A
PORT
O A
5
STANDARD MATERIALS LIST
BODY
SE AT
BALL
STEM PACKING
NUT
STEM
RETAINER
HANDLE
GLAND
O-RING SEALS
6
10
4
3
B
Cast Bronze C83600
RPTFE
ASTM B16 Brass, Plated or
B283, C37700
RPTFE
Corrosion Resistant Plated Steel
Brass, ASTM B16, UNS # C36000
Brass, ASTM B16, UNS # C36000
Plated Steel/Insulated Polyvinyl
Brass, ASTM B16, UNS # C36000
EPDM
E
8
7
4
5
3
2
1
9
D
(704) 841-6000
apollovalves.com
SS1452 © 2/20 Page 1 of 1
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without
notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.
Loading...