Apollo Conbraco 76-500 User Manual

76-500 SERIES

STAINLESS STEEL BALL VALVE W/ SPRING RETURN HANDLE

Female NPT Thread, 1/4” to 1” 2000 CWP (psig), 1-1/4” to 2” 1500 CWP (psig). Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 Compliant.

FEATU R ES

• Spring return to close (-01)

• Spring return to open (-08)

• Carbon and Graphite Reinforced seats (MPTFE)

• All components of lever are stainless steel

• Operating torque is approximately three times standard valve torque

• Blowout-proof stem design

• Adjustable packing gland

• Meets NACE MR0175 (2000) & MR0103 (2012)

• Investment cast components

• Fire safe “by design” (requires -24 sux)

OPTIONS AVAILABLE

(MORE INFORMATION IN SECTION J)

• inimum q uantit ies app ly

• To specify an option, replace the “0 1” sta ndard sux with th e sux of the option.

• To specify multiple options, replace the “ 01” sux with the d esire d suxes i n the
numer ical order shown below. NOT E: Not all suxes c an be combined to gether.

(SUFFIX) OPTION SIZES

-01 Standard Configuration All

-P -01 - BSPP (Parallel) Thread Connection 1/4” to 2”

-T -01- BSPT (Tapered) Thread Connection 1/4” to 2”

-08- 90° Reversed Stem 1/4” to 2”

-14- Side Vented Ball (Uni-Directional) 1/4” to 2”

-21- UHMWPE Seats (Non-PTFE) 1/4” to 2”

-24- Graphite Packing (fire safe “by design”) 1/4” to 2”

-35- PTFE Trim 1/4” to 2”

-44- Seal Welded 1/4” to 2”

-49- No Lubrication. Assembled Dry. 1/4” to 2”

-52- Two Tack Welds 1/4” to 2”

-57- Oxygen Cleaned 1/4” to 2”

-60- Grounded Ball & Stem 1/4” to 2”

Pressure/Temperature Ratings -

Page M-14, Graph No. 14 (1/4” to 1”)

Page M-13, Graph No. 12 (1-1/4” to 2”)

DIMENSIONS

PART NO. SIZE A B C D WT.

76-501-01A 1/4 ” 0.37 1.03 2.06 7.00 1.26

76-502-01A 3/8” 0.37 1.03 2.06 7.0 0 1.25

76-503-01A 1/2” 0.50 1.12 2.25 7.0 0 1.31

76-504-01A 3/4 ” 0.68 1.50 3.00 7. 00 1.98

76-505-01A 1” 0.87 1.68 3.37 7.00 2.35

76-506-01 1-1/4 ” 1.00 2.00 4.00 9.00 3.96

76-5 07-01 1-1/2” 1.25 2.18 4.37 9.00 4.78

76-50 8-01 2” 1.50 2.75 5.50 9.00 6.66

Customer Service [phone] industrial.apollovalves.com H-9

STANDARD MATERIAL LIST

PART MATERIAL

Handle SS w/vinyl

1

Stem packing Multifill PTFE (MPTFE)

2

Stem bearing RPTFE

3

Ball A276-316

4

Seat (2) Multifill PTFE (MPTFE)

5

Retainer

6

Gland nut A276-316

7

Stem A276-31 6

8

Lever nut 18-8 SS

9

Body seal PTFE (1-1/4” to 2”)

10

Body A351-CF8M

11

A276-3 16 (1/4” to 1”)
A351-CF8M (1-1/4” to 2”)