Apollo Conbraco 76-100 User Manual

76100 SERIES

Stainless Steel Ball Valve with Mounting Pad 1/4” - 1”

Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart)
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.

FEATURES

• Investment cast components

• Reinforced seats

• Mounting pad for easy actuator mounting

• Blow-out-proof stem design

• Adjustable packing gland

• Stainless Steel lever and nut

• Fire safe to API 607 (requires -24 sux)

• Meets NACE MR0175 (2000) & MR0103 (2012)

• CSA CGA 3.16-M88 (Requires “GS” sux)

• NSF/ANSI 61 Section 8, Annex G

• NSF-372, Drinking Water System Components - Lead Content

OPTIONS AVAILABLE: (More information in Section J)

• Minimum quantities apply

• To specify an option, replace the “01” standard sux with the sux of the option.

• To specify multiple options, replace the “01” sux with the desired suxes in the
numerical order shown below. NOTE: Not all suxes can be combined together.

SUFFIX OPTION SIZES

-01 Standard Conguration All

-P -01- BSPP (Parallel) Thread Connection 1/4” to 3”

-T -01- BSPT (Tapered) Thread Connection 1/4” to 3”

-02- Stem Grounded

-04-

-07- Steel Tee Handle 1/4” to 2”

-08- 90º Reversed Stem 1/4” to 3”

-14- Side Vented Ball (Uni-Directional) 1/4” to 2”

-15- Wheel Handle, Steel 1/4” to 2”

-16- Chain Lever - Vertical 3/4” to 2”

-19- Lock Plate 1/4” to 2”

-21- UHMWPE Trim (Non-PTFE) 1/4” to 3”

-24-

-27- SS Latch-Lock Lever & Nut 1/4” to 3”

-30- Cam-Lock and Grounded 1/4” to 2”

-32- SS Tee Handle & Nut 1/4” to 2”

STANDARD MATERIAL LIST

PART MATERIAL

1 Lever and grip 304 SS w/vinyl
2 Stem packing MPTFE
3 Stem bearing RPTFE
4 Ball A276-316 Stainless Steel
5 Seat (2) RPTFE
6 Retainer A351-CF8M SS or A276-316 SS
7 Gland nut A276-316 Stainless Steel
8 Stem A276-316 Stainless Steel
9 Lever nut 18-8 Stainless Steel
10 Body seal PTFE
11 Body A351-CF8M Stainless Steel

PRODUCT
NUMBER

76-101-01A 1/4” 0.37 1.02 2.05 1.71 3.85 0.50 1.12 0.88 0.34 0.53 0.375 0.234 1.16 0.58
76-102-01A 3/8” 0.37 1.02 2.05 1.71 3.85 0.50 1.12 0.88 0.34 0.53 0.375 0.234 1.16 0.55
76-103-01A 1/2” 0.50 1.12 2.23 1.79 3.85 0.50 1.12 0.90 0.34 0.59 0.375 0.234 1.38 0.63
76-104-01A 3/4” 0.68 1.47 2.96 2.03 4.75 0.87 1.37 1.02 0.42 0.78 0.437 0.256 1.75 1.30
76-105-01A 1” 0.87 1.67 3.34 2.16 4.75 0.87 1.37 1.02 0.42 0.91 0.437 0.256 1.94 1.60

A-14

REV. 11APR16

SIZE A B C D E F G H J K L M N W T.

* LEAD FREE: The wetted surfaces of this product shall contain no more than

0.25% lead by weighted average. Complies with Federal Public Law
111-380. ANSI 3rd party approved and listed.

www.apollovalves.com Customer Service [phone]

-35- PTFE Trim 1/4” to 3”

-39- SS Hi-Rise Locking Wheel Handle, SS Nut 1/4” to 2”

-40- Cyl-Loc and Grounded 1/4” to 2”

-44- Seal Welded 1/4” to 2”

-45- Less Lever & Nut 1/4” to 3”

-46- Latch Lock Lever - Lock in Closed Position Only 1/4” to 3”

-47- SS Latch Lock Oval Handle 1/4” to 2”

-48- SS Oval Handle (No Latch) & Nut 1/4” to 2”

-49- No Lubrication. Assembled Dry. 1/4” to 3”

-50- 2.25” CS Locking Stem Extension 1/4” to 3”

-57- Oxygen Cleaned 1/4” to 3”

-58- Chain Lever - Horizontal 3/4” to 2”

-60- Static Grounded Ball & Stem 1/4” to 3”

-64- 250# Steam Trim (MPTFE Seats & Packing) 1/4” to 3”

-GS CSA CGA 3.16 All

FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M14, GRAPH NO. 14

2.25” Stem Extension (Carbon Steel, Zinc Plated)

Graphite packing, PTFE body seal, RPTFE bearing
(Fire Safe API 607, 6th edition, ISO 10497:2010)

1/4” to 3”
1/4” to 3”

1/4” to 3”

76100 SERIES

Stainless Steel Ball Valve with Mounting Pad 1.25” - 2”

Female NPT Thread, 1500 CWP (psig). Cold Non-Shock. (See referenced P/T chart)
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.

FEATURES

• Investment cast components

• Reinforced seats

• Mounting pad for easy actuator mounting

• Blow-out-proof stem design

• Adjustable packing gland

• Stainless Steel lever and nut

• Fire safe to API 607 (requires -24 sux)

• Meets NACE MR0175 (2000) & MR0103 (2012)

• CSA CGA 3.16-M88 (Requires “GS” sux)

• NSF/ANSI 61 Section 8, Annex G

• NSF-372, Drinking Water System Components - Lead Content

OPTIONS AVAILABLE: (More information in Section J)

• Minimum quantities apply

• To specify an option, replace the “01” standard sux with the sux of the option.

• To specify multiple options, replace the “01” sux with the desired suxes in the
numerical order shown below. NOTE: Not all suxes can be combined together.

SUFFIX OPTION SIZES

-01 Standard Conguration All

-P -01- BSPP (Parallel) Thread Connection 1/4” to 3”

-T -01- BSPT (Tapered) Thread Connection 1/4” to 3”

-02- Stem Grounded

-04-

-07- Steel Tee Handle 1/4” to 2”

-08- 90º Reversed Stem 1/4” to 3”

-14- Side Vented Ball (Uni-Directional) 1/4” to 2”

-15- Wheel Handle, Steel 1/4” to 2”

-16- Chain Lever - Vertical 3/4” to 2”

-19- Lock Plate 1/4” to 2”

-21- UHMWPE Trim (Non-PTFE) 1/4” to 3”

-24-

-27- SS Latch-Lock Lever & Nut 1/4” to 3”

-30- Cam-Lock and Grounded 1/4” to 2”

-32- SS Tee Handle & Nut 1/4” to 2”

STANDARD MATERIAL LIST

PART MATERIAL

1 Lever and grip 304 SS w/vinyl
2 Stem packing MPTFE
3 Stem bearing RPTFE
4 Ball A276-316 Stainless Steel
5 Seat (2) RPTFE
6 Retainer A351-CF8M Stainless Steel
7 Gland nut A276-316 Stainless Steel
8 Stem A276-316 Stainless Steel
9 Lever nut 18-8 Stainless Steel
10 Body seal PTFE
11 Body A351-CF8M Stainless Steel

PRODUCT
NUMBER

76-106-01 1.25” 1.00 2.00 4.00 2.68 5.40 0.94 1.50 1.50 0.60 1.12 0.625 0.377 3.10
76-107-01 1.5” 1.25 2.17 4.34 3.25 7.75 0.94 1.50 1.50 0.60 1.28 0.625 0.377 4.20
76-108-01 2” 1.50 2.69 5.43 3.24 7.75 0.94 1.50 1.46 0.60 1.50 0.625 0.377 6.10

SIZE A B C D E F G H J K L M W T.

-35- PTFE Trim 1/4” to 3”

-39- SS Hi-Rise Locking Wheel Handle, SS Nut 1/4” to 2”

-40- Cyl-Loc and Grounded 1/4” to 2”

-44- Seal Welded 1/4” to 2”

-45- Less Lever & Nut 1/4” to 3”

-46- Latch Lock Lever - Lock in Closed Position Only 1/4” to 3”

-47- SS Latch Lock Oval Handle 1/4” to 2”

-48- SS Oval Handle (No Latch) & Nut 1/4” to 2”

-49- No Lubrication. Assembled Dry. 1/4” to 3”

-50- 2.25” CS Locking Stem Extension 1/4” to 3”

-57- Oxygen Cleaned 1/4” to 3”

-58- Chain Lever - Horizontal 3/4” to 2”

-60- Static Grounded Ball & Stem 1/4” to 3”

-64- 250# Steam Trim (MPTFE Seats & Packing) 1/4” to 3”

-GS CSA CGA 3.16 All

2.25” Stem Extension (Carbon Steel, Zinc Plated)

Graphite packing, PTFE body seal, RPTFE bearing
(Fire Safe API 607, 6th edition, ISO 10497:2010)

1/4” to 3”
1/4” to 3”

1/4” to 3”

* LEAD FREE: The wetted surfaces of this product shall contain no more than

0.25% lead by weighted average. Complies with Federal Public Law
111-380. ANSI 3rd party approved and listed.

Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA

FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M13, GRAPH NO. 12

REV. 11APR16

A-15

76100 SERIES

Stainless Steel Ball Valve 2.5” - 3”

Female NPT Thread, 1000 CWP (psig). Cold Non-Shock. (See referenced P/T chart)
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.

FEATURES

• Investment cast components

• Reinforced seats

• Mounting pad for easy actuator mounting

• Blow-out-proof stem design

• Adjustable packing gland

STANDARD MATERIAL LIST

PART MATERIAL

1 Lever and grip 304 SS w/vinyl
2 Stem packing MPTFE
3 Stem bearing RPTFE
4 Ball A276-316 Stainless Steel
5 Seat (2) RPTFE
6 Retainer A351-CF8M Stainless Steel
7 Gland nut A276-316 Stainless Steel
8 Stem A276-316 Stainless Steel
9 Lever nut 18-8 Stainless Steel
10 Body seal PTFE
11 Body A351-CF8M Stainless Steel

• Stainless Steel lever and nut

• Fire safe to API 607 (requires -24 sux)

• Meets NACE MR0175 (2000) & MR0103 (2012)

• CSA CGA 3.16-M88 (Requires “GS” sux)

• NSF/ANSI 61 Section 8, Annex G

• NSF-372, Drinking Water System Components - Lead Content

OPTIONS AVAILABLE: (More information in Section J)

• Minimum quantities apply

• To specify an option, replace the “01” standard sux with the sux of the option.

• To specify multiple options, replace the “01” sux with the desired suxes in the
numerical order shown below. NOTE: Not all suxes can be combined together.

SUFFIX OPTION SIZES

-01 Standard Conguration All

-02- Stem Grounded

-04-

-07- Steel Tee Handle 1/4” to 2”

-08- 90º Reversed Stem 1/4” to 3”

-14- Side Vented Ball (Uni-Directional) 1/4” to 2”

-15- Wheel Handle, Steel 1/4” to 2”

-16- Chain Lever - Vertical 3/4” to 2”

-19- Lock Plate 1/4” to 2”

-21- UHMWPE Trim (Non-PTFE) 1/4” to 3”

-24-

-27- SS Latch-Lock Lever & Nut 1/4” to 3”

-30- Cam-Lock and Grounded 1/4” to 2”

-32- SS Tee Handle & Nut 1/4” to 2”

-35- PTFE Trim 1/4” to 3”

-39- SS Hi-Rise Locking Wheel Handle, SS Nut 1/4” to 2”

-40- Cyl-Loc and Grounded 1/4” to 2”

-44- Seal Welded 1/4” to 2”

-45- Less Lever & Nut 1/4” to 3”

-46- Latch Lock Lever - Lock in Closed Position Only 1/4” to 3”

-47- SS Latch Lock Oval Handle 1/4” to 2”

-48- SS Oval Handle (No Latch) & Nut 1/4” to 2”

-49- No Lubrication. Assembled Dry. 1/4” to 3”

-50- 2.25” CS Locking Stem Extension 1/4” to 3”

-57- Oxygen Cleaned 1/4” to 3”

-58- Chain Lever - Horizontal 3/4” to 2”

-60- Static Grounded Ball & Stem 1/4” to 3”

-64- 250# Steam Trim (MPTFE Seats & Packing) 1/4” to 3”

-GS CSA CGA 3.16 All

* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average. Complies with Federal Public Law 111-380. ANSI 3rd party
approved and listed.

2.25” Stem Extension (Carbon Steel, Zinc Plated)

Graphite packing, PTFE body seal, RPTFE bearing
(Fire Safe API 607, 6th edition, ISO 10497:2010)

1/4” to 3”
1/4” to 3”

1/4” to 3”

FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M12, GRAPH NO. 8

PRODUCT
NUMBER

76-109-01 2.5” 2.50 3.38 6.75 4.03 7.75 1.38 3.37 1.71 0.60 2.00 0.625 0.377 15.60
76-100-01 3” 2.50 3.38 6.75 4.03 7.75 1.38 3.37 1.71 0.60 2.00 0.625 0.377 16.50

A-16

REV. 11APR16

SIZE A B C D E F G H J K L M W T.

www.apollovalves.com Customer Service [phone]

FLOW DATA

For Apollo® Ball Valves

The listed Cv “factors” are derived from actual ow testing, in the Apollo® Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina.
These tests were completed using standard “o the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should
be understood that these factors are for the valve only and also include the connection conguration. The ow testing is done utilizing water
as a uid media and is a direct statement of the gallons of water owed per minute with a 1 psig pressure dierential across the valve/
connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate ow of most media for valve sizing.

FLOW OF LIQUID

Q = C

or ∆P =

Where:

Q = ow in US gpm
ΔP = pressure drop (psig)
SpGr = specic gravity at owing temperature
Cv = valve constant

V

(Q)2 (SpGr)

√

(Cv)

∆P

SpGr

2

Cv FACTORS FOR APOLLO VALVES

VALVE

70B-140 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­70-100/200 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- --­70-300/400 Series -- -- 15 30 43 48 84

70-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- -­70-800 Series 8.4 7.2 15 30 43 48 84 -- -- -- -- -- -- -- --

71-AR Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- -­71-100/200 Series -- -- -- 30 43 48 84 108 190 370 -- -- -- -- -­72-100/900 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --

73A-100 Series 8.4 7.2 15 30 43 48 84 108 -- -- -- -- -- -- --

73-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --

74-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­75-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- --

76-AR Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- --

76F-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- -­76FJ-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --

76FK-100 Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --

76-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --

76-300/400 Series -- -- 26 48 65 125 170 216 -- -- -- -- -- -- --

76-600 Series 2.3 4.5 5.4 12 14 21 34 47 -- -- -- -- -- -- --

76J-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --

76J-AR Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- --

76K-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --

76K-AR Series 8.4 7.2 15 30 43 48 84 108 190 370 670 -- -- -- -­7K-100 Series -- -- 15 51 68 125 177 389 503 -- -- -- -- -- --

77-AR Series 8.1 15 15 51 68 125 177 389 -- -- -- -- -- -- --

77C-100/200 Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- --

77D-140 Series 4.5 7.2 16 36 68 125 177 389 -- -- -- -- -- -- --

1/4 3/8 1/2 3/4 1 1.25 1.5 2 2.5 3 4 6 8 10 12

FLOW OF GAS

or ∆P =

Q = 1360 C

5.4 x 10

V

(∆P) (P

(SpGr) (T)

√

-7

(SpGr) (T) (Q)

2)

(Cv)2 (P2)

Where:

Q = ow in SCFH
ΔP = pressure drop (psig)
SpGr = specic gravity (based on air = 1.0)
P2 = outlet pressure–psia (psig + 14.7)
T = (temp. °F + 460)
Cv = valve constant

CAUTION: The gas equation shown, is valid at very low pressure drop ratios.
The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet
pressure (P1) exceeds 0.02.

NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than 0.02.

SIZE (IN.)

108 -- -- -- -- -- -- --

continued on next page

2

Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA

M-3

FLOW DATA

For Apollo® Ball Valves

Cv FACTORS FOR APOLLO VALVES (continued from M-3)

VALVE

77D-640 Series -- -- -- 11 24 35 -- -- -- -- -- -- -- -- --

77G-UL Series 4.5 7.2 16 36 68 125 177 389 503 -- -- -- -- -- --

77W Series -- -- 16 36 68 125 177 389 -- -- -- -- -- -- --

77-100/200 Series 8.1 15 15 51 68 125 177 389 503 -- -- -- -- -- --

79 Series 8.5 8.5 9.8 32 44 66 148 218 440 390 -- -- -- -­80 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --

82-100/200 Series 8.1 14 26 51 68 120 170 376 510 996 1893 -- -- -- --

83A/83B Series 8.1 14 26 51 68 120 170 376 -- -- -- -- -- -- --

83R-100/200 Series -- -- -- -- -- -- 170 376 -- 996 1893 -- -- -- --

86A/86B Series 8.1 14 26 51 68 120 170 376 -- -- -- -- -- -- --

86R-100/200 Series -- -- -- -- -- -- 170 376 -- 996 1893 -- -- -- --

87A-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­87A-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87A-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­87A-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87A-F00 Series -- -- -- -- 75 -- 195 410 545 1021 2016 4837 -- -- -­87B-100 Series -- -- -- -- -- -- -- -- -- 375 673 1099 1902 3890 --

87J-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­87J-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87J-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 --

87J-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87K-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­87K-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
87K-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­87K-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-100 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­88A-200 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-700 Series -- -- -- -- -- -- 86 104 234 375 673 1099 1902 3890 -­88A-900 Series -- -- 15 19 75 -- 195 410 545 1021 2016 4837 9250 15170 22390
88A-F00 Series -- -- -- -- 75 -- 195 410 545 1021 2016 4837 -- -- -­88B-100 Series -- -- -- -- -- -- -- -- -- 375 673 1099 1902 3890 --

89-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- -­9A-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- -­90-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- -­92-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- -­93-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- --

94A-100/200 Series 6 7 19 34 50 104 268 309 629 1018 1622 -- -- -- --

96-100 Series 8.3 6.7 5.7 10 16 25 40 62 -- -- -- -- -- -- -­399-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- -­489-100 Series 8.4 7.2 15 30 43 48 84 108 190 370 -- -- -- -- --

1/4 3/8 1/2 3/4 1 1.25 1.5 2 2.5 3 4 6 8 10 12

SIZE (IN.)

--

M-4

www.apollovalves.com Customer Service [phone]

PRESSURE TEMPERATURE RATINGS

2000 CWP (CS) ASTM A216-WCB or A105 (GRAPH 13)

2000 CWP (SS) ASTM A351-CF8M (GRAPH 14)

M-14

www.apollovalves.com Customer Service [phone]

PRESSURE TEMPERATURE RATINGS

1500 CWP (CS) ASTM A216-WCB or ASTM A105 (GRAPH 11)

1500 CWP (SS) ASTM A351-CF8M (GRAPH 12)

Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA

M-13

PRESSURE TEMPERATURE RATINGS

1000 CWP (CS) ASTM A216-WCB (GRAPH 7)

1000 CWP (SS) ASTM A351-CF8M (GRAPH 8)

M-12

www.apollovalves.com Customer Service [phone]