Apollo Conbraco 73A User Manual

73A-100 SERIES

CARBON STEEL BALL VALVE

Female NPT Thread, 1/4” to 1” 2000 CWP (psig), 1-1/4” to 2” 1500 CWP(psig), Cold Non-Shock. 150 psig Saturated Steam.
(See referenced P/T chart)
Vacuum Service to 29 inches Hg.
MSS SP-110 Compliant.
AAR Approved #E999032

FEATU R ES

• Forged construction

• Raised handle stops

• Blowout-proof stem design

• Adjustable packing gland

• Zinc phosphate corrosion protection

• Fire safe to API 607 (requires -24 sux)

STANDARD MATERIAL LIST

PART MATERIAL

Lever nut Steel, zinc plated

1

Gland nut A10 8- CS

2

Stem packing MPTFE

3

Retainer A216-WCB

4

Body seal RPTFE (1/2” to 2”)

5

Ball

6

Seat (2) RPTFE

7

Body A105

8

Stem bearing RPTFE

9

Stem

10

Lev er/grip Steel, zinc plated, with vinyl

11

ASTM A108, Carbon Steel, Chrome Plated
or ASTM A 276, Type 316 Stainless Steel

ASTM A108, Carbon Steel or
ASTM A276, Type 316 Stainless Steel

DIMENSIONS

PART NO. SIZE A B C D E WT.

73A10101A 1/4" 0.38 1.03 2.05 1.72 3.85 0.58

73A10201A 3/8" 0.38 1.03 2.05 1.72 3.85 0.54

73A10301A 1/2" 0.50 1.12 2.23 1.78 3.88 0.63

73A10401A 3/4 " 0.68 1 .47 2.97 2.05 4.75 1. 27

73A10501A 1" 0.87 1.65 3.32 2.18 4.75 2.20

73A10 601 1-1 /4” 1.00 1.98 3.97 2.72 5.50 3.74

73A10701 1-1/2” 1.25 2.17 4.35 3.20 7.7 6 5.30

73A10801 2" 1.50 2.73 5.44 3.27 7.75 8.03

VAR I ATIONS AVAI L AB LE

• 73A-140 Series (316 SS Ball & Stem. NACE MR0175 (2000) &
MR0103 (2003) compliant)

OPTIONS AVAILABLE

(MORE INFORMATION IN SECTION J)

• Minimum quantities apply

• To specify an option, replace the “0 1” sta ndard sux with th e sux of the option.

• To specify multiple options, replace the “ 01” sux with the d esire d suxes i n the
numer ical order shown below. NOT E: Not all suxes c an be combined to gether.

(SUFFIX) OPTION SIZES

-01 Standard Configuration All

-P -01 BSPP (Parallel) Thread Connection All

-T -01 BSPT (Tapered) Thread Connection All

-02- Stem Grounded All

-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated) All

-07- Steel Tee Handle 1/4” to 1-1/2”

-08- 90º Reversed Stem All

-10- SS Lever & Nut All

-14- Vented Ball All

-15- Wheel Handle, Steel 1/4” to 1-1/2”

-16- Chain Lever - Vertical 3/4” to 2”

-21- UHMWPE Trim (non TFE) All

-24-

-27- SS Latch- Lock Lever & Nut All

-30- Cam-Lock & Grounded All

-32- SS Tee Handle & Nut All

-35- PTFE Trim All

-39- SS Hi-Rise Locking Round Handle, SS Nut All

-40- Cyl-Loc & Grounded All

-45- Less Lever & Nut All

-47- SS Oval Latch-Lock Handle & Nut All

-48- SS Oval Handle (No Latch) & Nut All

-50- 2-1/4” CS Locking Stem Extension All

-52- Two Tack Welds All

-56- Multi-Fill Seats All

-58- Chain Lever - Horizontal 3/4” to 2”

-60- Static Grounded Ball & Stem All

-64-

-67- Cleaned for Industrial Gas - CS Valves All

-UA- AIS (American Iron & Steel) Compliant All

Graphite Packing, PTFE Body Seal,

RPTFE Bearing (API 607, 6th Edition, ISO 10497:2010)

250# Steam Trim (MPTFE Seats & Packing)

Use with 316 SS Ball & Stem Variation

All

All

Pressure/Temperature Ratings -

Page M-14, Graph No. 13 (1/4” to 1”)

Page M-13, Graph No. 11 (1-1/4” to 2”)

REV. 18JUL19

Customer Service [phone] industrial.apollovalves.com A-13