Apollo Conbraco 70-100 User Manual

70-100 SERIES

BRONZE BALL VALVE

Female NPT Thread, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts)
Vacuum Service to 29 inches Hg.
MSS SP-110 Compliant.

FEATU R ES

• Two-piece body

• Reinforced seats

• Blowout-proof stem design

• Adjustable packing gland

STANDARD MATERIAL LIST

PART MATERIAL

Lever and grip Steel, zinc plated w/vinyl

1

Stem packing MPTFE

2

Stem bearing RPTFE

3

Ball B16 Brass, chrome plated

4

Seat (2) RPTFE (1/4” to 3”); TFM (4”)

5

Retainer

6

Gland nut B16 Brass

7

Stem B16 Brass

8

Lever nut Steel, zinc plated

9

Body seal PTFE (1 -1/4” to 4”)

10

Body B584-C84400

11

B16 Brass (1/4” to 1”)
B584-C84400 (1-1/4” to 4”)

DIMENSIONS

PART NO. SIZE A B C D E WT.

70-101-01 1/4 ” 0.37 1.03 2.06 1.75 3.87 0.60

70-102-01 3/8” 0.37 1.03 2.06 1.75 3.87 0.56

70-103-01 1/2” 0.50 1.12 2.17 1.75 3.87 0.63

70-104-01 3/4 ” 0.68 1.50 3.00 2.12 4.87 1.39

70-105-01 1” 0.87 1.68 3.37 2.25 4.87 1.72

70-106-01 1-1/4 ” 1.00 2.00 4.00 2.62 5.50 3.26

70-107-01 1-1/2” 1.25 2.18 4.37 3.06 8.00 4.61

70-108-01 2” 1.50 2.34 4.68 3.25 8.00 6.06

70-109-01A 2-1/2” 2.00 3.12 6.25 3.72 8.00 1 7.25

70-100-01 3” 2.50 3.37 6.75 4.12 8.00 18.60

70-10A-01 4” 3.12 3.69 7. 37 5.25 9.94 25.50

VAR I ATIONS AVAI L AB LE

• 70-140 Series (316 SS Ball & Stem)

• 70-190 Series (Locked Retainer)

OPTIONS AVAILABLE

(MORE INFORMATION IN SECTION J)

• Minimum quantities apply

• To specify an option, replace the “0 1” sta ndard sux with th e sux of the option.

• To specify multiple options, replace the “ 01” sux with the d esire d suxes i n the
numer ical order shown below. NOT E: Not all suxes c an be combined to gether.

(SUFFIX) OPTION SIZES

-01 Standard Configuration All

-P -01 - BSPP (Parallel) Thread Connection 1/4” to 3”

-T -01- BSPT (Tapered) Thread Connection 1/4” to 3”

-02- Stem Grounded All

-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated) 1/4” to 3”

-05- Plain Ball 1/4” to 3”

-07- Steel Tee Handle 1/4” to 2”

-08- 90º Reversed Stem 1/4” to 3”

-10- SS Lever & Nut 1/4” to 3”

-11- Therma-Seal™ Insulating Tee Handle 1/4” to 2”

-14- Side Vented Ball (Uni-Directional) All

-15- Wheel Handle, Steel 1/4” to 2”

-16- Chain Lever - Vertical 3/4” to 2”

-17- Rough Chrome Plated - Bronze Valves 1/4” to 3”

-21- UHMWPE Trim (Non-PTFE) 1/4” to 3”

-24- Graphite Packing 1/4” to 3”

-27- SS Latch- Lock Lever & Nut All

-30- Cam-Lock and Grounded 1/4” to 2”

-32- SS Tee Handle & Nut 1/4” to 2”

-35- PTFE Trim 1/4” to 3”

-36- SS Hi-Rise Round Handle, SS Nut 1/4” to 2”

-39- SS Hi-Rise Locking Wheel Handle, SS Nut 1/4” to 2”

-40- Cyl-Loc and Grounded 1/4” to 2”

-41- Automatic Drain (+50°F to 200°F limit. 125 psig max.) 1/4” to 2”

-45- Less Lever & Nut 1/4” to 3”

-46- Latch Lock Lever - Lock in Closed Position Only 1/4” to 3”

-47- SS Oval Latch-Lock Handle & Nut 1/4” to 2”

-48- SS Oval Handle (No Latch) & Nut 1/4” to 2”

-49- No Lubrication. Assembled Dry. All

-50- 2-1/4” CS Locking Stem Extension 1/4” to 3”

-56- Multifill Seats & Packing 1/4” to 3”

-57- Oxygen Cleaned All

-58- Chain Lever - Horizontal 3/4” to 2”

-60- Static Grounded Ball & Stem 1/4” to 3”

-63- NPT x Solder/Socket Weld 3/8” to 4”

-64-

-92- Balancing Stop 1/4” to 3”

-94- 2-1/4” Stem Extension, Balancing Stop 1/4” to 3”

-HC- Hose Cap & Chain 1/2” to 1”

Pressure/Temperature Ratings - Page M-10, Graph No. 4

250# Steam Trim (MPTFE Seats & Packing)

Use with 316 SS Ball & Stem Variation

1/4” to 3”

Customer Service [phone] industrial.apollovalves.com A-3