Apollo Conbraco 62-500 User Manual
62-500 Series
Stainless Steel, Soft Seat Check Valve
DESCRIPTION
The Apollo® 62-500 series check valves are ideally suited for lower ow applications in tough
industrial environments, since seat and soft seat are less prone to vibration. The stainless steel
body and check provide lasting protection against reverse ow.
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative:
Wholesale Distributor:
FEATURES
• Sizes 1/4” to1”
• No radial alignment necessary
• Bubble-tight shut-o, ideally suited for
gaseous service
• Not recommended for reciprocating
pumps and similar applications
conductive to repetitious vibrations
• MADE IN THE USA
• Fluorocarbon (rubber) soft seat for
reduced noise and vibration
• Spring loaded for fast seating action
• Straight through ow minimizes
velocity change
•
Spring is fully protected from ow stream
• Canadian Registration Number
0C11218.5C
• Numerous options are available
DIMENSIONS
PERFORMANCE RATING
• Maximum Operating Pressure:
400 psig WOG
• Maximum Temperature: 350° F.
• Standard Cracking Pressure: 1/2 psi
APPROVALS
• Ideally suited for gaseous service.
Exceptional resistance to chemicals
and corrosion.
PRECAUTIONARY NOTE:
Not recommended for applications which
may induce pulsation or repetitive vibration.
See Installation Manual for details.
400
300
200
100
Pressure - PSIG
STANDARD MATERIALS LIST
Part Name Material
Body ASTM A351,CF8M,Stainless Steel
Retainer ASTM A276,316 Stainless Steel
Seat Fluorocarbon rubber - Viton
Check ASTM A276,316 Stainless Steel
Spring AISI 316 Stainless Steel
Viton® Seat
0° 100° 200° 300° 400°
Part
Number
Size
(in.)
Dimensions (in.)
A B C
Cv
Wt.
(lbs.)
62-501-01 1/4” 2.31 1.12 1.12 0.47 0.38
62-502-01 3/8” 2.31 1.12 1.12 1.57 0.38
62-503-01 1/2” 2.31 1.12 1.12 2.20 0.38
62-504-01 3/4” 2.87 1.37 1.50 4.78 0.75
62-505-01 1” 3.50 1.75 1.93 6.00 1.45
This specication is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specication without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.
SS1029 © 8/15 Page 1 of 1
Apollo Valves, Manufactured by Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
Temperature °F
Check compatibility of seat material
www.apollovalves.com | (704) 841-6000
Loading...