Apogee Sound AFI-PT5 User Manual

Driver Complement:

L

ow Fre

quency

: One Apogee 5.25"(123mm) permanent magnet

cone-type driver

High F

requency: One Apogee .5" (13mm) Mylar®tweeter

Input Connectors:

Spring terminals

Compatible Processors:

AFI Main Frame Controller Chassis (using AFI-Point5 Module)
or DLC24

Grille:

Highly durable, quality finish on perforated steel

Rigging Hardware:

Four 1/4-inch, 20-threaded inserts

Finish:

Black or white

Enclosure Type:

Injection molded, optimally vented

Options/Accessories:

• AFI Controller Processor or DLC24 Digital Processor

• Comes with yoke

• 70V transformer version available

Contractor Series

Indoor/Outdoor Speakers

Engineering Data:

Description:

Format:

Mono Amp/Two-way

Dispersion:

H: 100° x V: 100°

Frequency Response (1m on axis):

100 Hz to 20 kHz ± 3 dB, –10 @ 60 Hz

Max. SPL (@1m):

104 dB cont./110 dB peak

Sensitivity (1W @ 1m):

89 dB SPL / 100 Hz to 20 kHz

Nominal Impedance:

8 ohms

Max. Power Handling:

60W cont./240W peak

Dimensions:

front: 6.4"(163mm) W x 9.3"(236mm) H
rear: 5.625"(143mm) W
depth: 7.0"(178mm)

Weight:

4.5 lb. (2.0 kg)

The AFI-Point5 is an ultra-compact, high
fidelity, full-range speaker system designed
for applications where where small size is
required. It is perfect for monitoring, delay fill
in theaters, and distributed systems.

AFI-Point5

©2006 Bogen Communications, Inc. 06/12

Specifications subject to change without notice. 55-0068-01C

Polar Measurements AFI-Point5 (6 dB/division, normalized)

Frequency Response AFI-Point5

All polar measurements obtained in a free-

field environment at 10° increments.

Dimensional Drawings AFI-Point5 (dimensions in inches and millimeters)

Measured in a free-field anechoic environment using a swept one-third octave input.

Processor Notes:

The AFI Controller consists of an analog Main Frame which accepts four voicing
modules. Modules are available for each of the different AFI loudspeaker
types, with two module bays required for bi-amplified speakers.
The DLC24 Digital Loudspeaker Controller is a digital engine with an analog
surface. It combines the most advanced technology available with intuitive
interfaces to provide the key elements that ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed
installation applications.
The controllers provide factory-set equalization curves to smooth the
response, protective limiting, and active crossovers (for bi-amplified models
and subwoofers). Barrier strip inputs and outputs are standard on the
AFI Controller.

12 dB/division

Hz (Frequency)

50 Spring Street, Ramsey, NJ 07446, USA
Tel: [phone]• Fax: [phone] • www.apogee-sound.com