APG RST-5000 datasheet

RST-5000 Series

Flexible by Design

The RST-5000 oers aordable remote tank monitoring by taking your 4-20 mA device and posng the
readings to a secure website, sending you an email or a text alarm to your cell phone. Connect up to 10
sensors using the RST-5000 Series as the master for an RS-485 network.

Features

• Cost Eecve

• Compable with any 4-20 mA device

• Ethernet Port (TCP/IP)

• Internal Web Page

• Connect up to 10 sensors

Automaon Products Group www.apgsensors.com
tel. [phone] / direct 435.753.7300 [e-mail]

RST-5000 Series

4.0”

101.6 mm

33 mm Din-Rail

Performance

• Module Input: RST-5001 4-20 mA

• Resolution: 12 bit

• Adjustments via internal web page

• Built in volume calculations

Connectivity

• Output:

- Ethernet TCP/IP to internal web page or APG
website

- 2 isolated Solid State Relays (130ma Max)
Or
2 inputs that are activated using dry contact

closure

1.0”

25.40 mm

4.50”

114.3 mm

Electrical

• Operating Volatge:
48 VDC POE (Sensor powered over Ethernet
cable requires POE injector or switch.)

- 24VDC Output (200 mA max. current)
Optional 24VDC supply
(No POE injector required)

- 24 VDC supply wil also be used as the
voltage supply for the sensor.

• Electrical Connection: RJ-45 Port
Terminal block for sensor power, 4-20 mA
input and relay connections

Environmental

• Operating Temp.: -40º to 140ºF (-40º to 60ºC)

Certication

• General Purpose (Pending)

Physical

• Housing: Polymide

• Mounting: 33 mm Din-Rail

Automaon Products Group www.apgsensors.com
tel. [phone] / direct 435.753.7300 [e-mail]
2

4-20 Input

& Sensor Power

Relay Connecons

Ethernet

Connecitonon

Modbus Terminals

for RST-5002 Only