Page 1
APG
Amplied Output Industrial
Pressure Transducers
Series: PT-L1/L3/L10
®
Our amplied output pressure transmitters are the economical answer for all applications requiring high accuracy
and reliability over a wide range of pressures. The PT-L1/L3/L10 pressure transmitters oer ranges from vacuum to
10,000 psi, all stainless steel construction, high burst pressure, and high acuracy.
Features
• Cost eective
• High overpressure capability
• Zero and span adjustments
• Single piece stainless steel process tting and sensor
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
Rev. A4, 02/05/2019
Page 2
APG
PT-L1/L3/L10 Specications
CAN - PROCESS CONNECTION WELDED
CAN - PROCESS CONNECTION WELDED
3.90
[99.1]
.25
[6.4]
.55
[14.0]
LOC-TITE®
Automation Products Group
Model #:
Part #: Range:
3/4" HEX
1/4" NPT
1025 West 1700 North
Logan, UT 84321 USA
Phone (888) 525-7300
K0, E3 - KNURLED NUT, 4-PIN BAYONET
4-PIN BAYONET w/ KNURLED NUT
CAN - PROCESS CONNECTION w/ LOC-TITE®
3.54
[89.9]
.25
[6.4]
.55
[14.0]
WELDED CONNECTION
Automation Products Group
Model #:
Part #: Range:
1025 West 1700 North
Logan, UT 84321 USA
Phone (888) 525-7300
.75
[19.1]
LENGTH PER ORDER
.75
[19.1]
3.92
[99.6]
.25
[6.4]
.55
[14.0]
LOC-TITE®
Automation Products Group
Model #:
Part #: Range:
3/4" HEX
1/4" NPT
1025 West 1700 North
Logan, UT 84321 USA
Phone (888) 525-7300
K1, E4 - TAMPER RESISTANT NUT, 4-PIN M12
EUROFAST M12 w/ TAMPER RESISTANT NUT & LOC-TITE®
CAN - PROCESS CONNECTION w/ LOC-TITE®
3.97
[100.8]
.25
[6.4]
.55
[14.0]
WELDED CONNECTION
Automation Products Group
Model #:
Part #: Range:
1025 West 1700 North
Logan, UT 84321 USA
Phone (888) 525-7300
.75
[19.1]
M12x1
TAMPER RESISTANT
w/ LOC-TITE®
.75
[19.1]
3/4" HEX
1/4" NPT
TAMPER RESISTANT
w/ LOC-TITE®
K2, E5 - TAMPER RESISTANT NUT, PIGTAIL
CABLE PIGTAIL W/ TAMPER RESISTANT NUT & LOC-TITE®
Performance
• Accuracy
B.F.S.L. ≤ 0.25% of full scale
NIST up to ±0.1% available on select ranges
• Temp Compensation Range:
Up to 0º - 130ºF (-17º - 54ºC)
• Extended Temp Compensation Ranges: (Optional)
-40º - 180ºF (-40º - 82ºC)
0º - 185ºF (-17º - 85ºC)
Connectivity
• Output:
4-20 mA
0-5 VDC
1-5 VDC
1-6 VDC
0-10 VDC
• Internet Connectivity:
RST-5003 (4-20 mA version only)
3/4" HEX
1/4" NPT
K3, E3 - WELDED 4-PIN BAYONET
4-PIN BAYONET, WELDED CONNECTION
Electrical
• Supply Voltage:
4-20 mA: 10 - 36 VDC
0-5 VDC: 9 - 33 VDC
1-5 VDC: 9 - 33 VDC
1-6 VDC: 9 - 33 VDC
0-10 VDC: 14 - 33 VDC
• Electrical Protection:
Reverse polarity
Physical
• Material: 15-5, 17-4, or 316L SS
Programming
• Field Calibration:
Zero and Span adjust
WELDED CONNECTION
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
2
Rev. A4, 02/05/2019
Page 3
APG
Common Model Congurations
4-20 mA Output
Model Number Model Description
PT-L1-C-15-PSIA-E5-5-P0-N0-M1-V0-K0-S0 0-15 PSI, Absolute Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-60-PSIA-E5-5-P0-N0-M1-V0-K0-S0 0-60 PSI, Absolute Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-5-PSIG-E5-5-P0-N0-M1-V0-K0-S0 0-5 PSI, Gauge Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-30-PSIG-E5-5-P0-N0-M1-V0-K0-S0 0-30 PSI, Gauge Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-100-PSIG-E5-5-P0-N0-M1-V0-K0-S0 0-100 PSI, Gauge Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-50-PSICG-E5-5-P0-N0-M1-V0-K0-S0 0-50 PSI, Compound Gauge Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-500-PSICG-E5-5-P0-N0-M1-V0-K0-S0 0-500 PSI, Compound Gauge Reference, 1/4” NPTM, 316L SS, 5 ft. cable
PT-L1-C-1000-PSIS-E5-5-P0-N0-M2-V0-K0-S0 0-1,000 PSI, Sealed Gauge Reference, 1/4” NPTM, 17-4 SS, 5 ft. cable
PT-L1-C-5000-PSIS-E5-5-P0-N0-M2-V0-K0-S0 0-5,000 PSI, Sealed Gauge Reference, 1/4” NPTM, 17-4 SS, 5 ft. cable
PT-L1-C-10000-PSIS-E5-5-P0-N0-M2-V0-K0-S0 0-10,000 PSI, Sealed Gauge Reference, 1/4” NPTM, 17-4 SS, 5 ft. cable
Accessories
Please order separately, by part number.
Mating Connector Part Number
4-pin bayonet mating connector (E3) 509010 -10xx -20xx 02, 05, 10, 25
4-pin female (M12) mating connector (E4)* -- 135407-000x 2 meters, 5 meters
6-pin circular mating connector (E1) 509110 -10xx -20xx 02, 05, 10, 25
6-pin bayonet mating connector (E17) 509165 -10xx -20xx 02, 05, 10, 25
*Note: 4-pin female (M12) must be ordered with 2 or 5 meters of cable. It is not available as mating connector only.
Cable in Feet Part Number Sufx
Cable Lengths
mA Output VDC Output
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
®
3
Rev. A4, 02/05/2019
Page 4
APG
Model Conguration Options
Model Number: PT- _____ - C - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____
A B C D E F G H I J K L
®
A. Operation
□ L1 4-20 mA □ L11 1-6 VDC
□ L3 0-5 VDC □ L12 1-5 VDC
□ L10 0-10 VDC □ L21 1-10 VDC
B. Common Pressure Ranges - PSI*
□ 5 □ 50 □ 200 □ 1000 □ 5000
□ 15 □ 60 □ 300 □ 2000 □ 10000
□ 30 □ 100 □ 500 □ 3000
*Other ranges available. Please consult factory.
C. Unit of Measure
▲
□ PSI
□ bar □ inH
□ kPa □ inHg
O □ kgcm
2
2
□ mbar □ mmHg □ fsw
D. Pressure Type
□ G Gauge □ A Absolute
□ CG Compound Gauge □ S Sealed
□ V Vac
G. Process Connection
▲
□ P0
1/4-18 NPTM □ P16 PT 1/4 (BSPP) male
□ P4 7/16 SAE male □ P22 G3/8 (3/8 BSPP) male
ush mount
□ P5 1/4-18 NPTF □ P23 G1/2 (1/2 BSPP) male
□ P7 7/16-20 SAE male □ P30 High Pressure Sno Trik
(M-250C, Autoclave male)
□ P14 1/8-27 NPTM □ P54 7/16-20 UNJF-3A male
w/ cone
H. Accuracy
1-5,000 PSI
□ N0*▲ ±0.25%
□ N1* ±0.25% with NIST certication
□ N2 ±0.1% with NIST certication
*Note: ±0.25% available at 10,000 psi for 4-20 mA output only.
10,000 PSI
□ N12 ±0.5%
□ N13 ±0.5% with NIST certication
I. Materials
□ M0 15-5 SS (≥ 1k psi)
▲
□ M1
316L SS (up to 5k psi)
□ M2 17-4 SS (≥ 1k psi)
E. Electrical Connection
Mating connector sold separately
□ E1 6-pin circular
□ E3 4-pin bayonet
□ E4 4-pin M12 Micro connector
▲
□ E5
Pigtail with cable (specify length below)
□ E17 6-pin bayonet
F. Electrical Cable Length
□ ___ Number represents cable length, in 5-ft increments,
included on E5 pigtail option above.
(ex. E5-10 represents pigtail with 10 ft. cable)
Note: ▲Indicates this option is standard.
J. Vibration
▲
□ V0
Standard
□ V1 High (not available with K0)
K. Can Assembly Connections
Can - Elec Conn. Can - Process Conn. E Options
▲
□ K0
□ K1
□ K2
□ K3
* Tamper Resist: Smooth Nut with Loc-Tite
L. Temperature
□ S0
Knurl Loc-Tite E1 - E5
Tamper Resist* Loc-Tite E1 - E5
Tamper Resist* Weld E1 - E5
Weld Weld E3, E17
▲
Standard: 0º - 130ºF (-17º - 54ºC)
□ S1 Extended: -40º - 180ºF (-40º - 82ºC)
□ S4 Extended: 0º - 185ºF (-17º - 85ºC)
Automation Products Group, Inc. | 888.525.7300 | [email protected] | www.apgsensors.com
Document #9004540; Part # 125816-0027 Rev. A4, 02/05/2019
Loading...