APG PT-L1, PT-L3, PT-L10 Operating Manual

APG

PT-L Pressure Transducer

User Manual

Amplied Output Series

R

Doc #9004131

Rev A3, 01/18

Table of Contents

Introduction ................................................................................................................ iii

Warranty and Warranty Restrictions .................................................................... iv

Chapter 1: Specications and Options.....................................................................1

Dimensions ........................................................................................................................................1

Specications ...................................................................................................................................2

Model Number Congurator .......................................................................................................... 3

Electrical Connectors, Pinout Table, and Supply Power Table .............................................. 4

Wiring Diagrams .............................................................................................................................. 5

Chapter 2: Installation and Removal Procedures and Notes ..............................5

Tools Needed .....................................................................................................................................5

Mounting Instructions ................................................................................................................... 6

Electrical Installation .....................................................................................................................6

Removal Instructions .....................................................................................................................6

Chapter 3: Maintenance .............................................................................................7

General Care ...................................................................................................................................... 7

Zero Trimming ...............................................................................................................................7-8

Re-Calibration ................................................................................................................................... 8

Repair and Returns .......................................................................................................................... 8

ii

Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]

Introduction

Thank you for purchasing a PT-L amplied series pressure transmitter from APG. We appreciate your
business! Please take a few minutes to familiarize yourself with your PT-L and this manual.

The PT-L series of pressure transmitters oers economical reliability over a wide range of pressures. The
small size, integrated electronics, wide operating temperature range, and durability, make the PT-L the
perfect instrument with an amplied output signal for static and dynamic pressure measurements.

Reading your label

Every APG instrument comes with a label that includes the instrument’s model number, part number, serial
number, and a wiring pinout table. Please ensure that the part number and pinout table on your label
match your order.

Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]

iii

Warranty and Warranty Restrictions

This product is covered by APG’s waranty to be free from defects in material and workmanship under
normal use and service of the product for 24 months. For a full explanation of our Warranty, please visit

https://www.apgsensors.com/about-us/terms-conditions. Contact Technical Support to recieve a Return

Material Authorization before shipping your product back.

Scan the QR code below to read the full explanation of our Warranty on your tablet or smartphone.

iv

Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]

Chapter 1: Specications and Options

• Dimensions

3.90

[99.1]

.25

[6.4]

.55

[14.0]

LOC-TITE®

Automation Products Group

Model #:

Part #: Range:

1025 West 1700 North

Logan, UT 84321 USA
Phone [phone]

3/4" HEX

1/4" NPT

K0, E3 - KNURLED NUT, 4-PIN BAYONET

4-PIN BAYONET w/ KNURLED NUT

CAN - PROCESS CONNECTION w/ LOC-TITE®

3.54

[89.9]

.25

[6.4]

.55

[14.0]

WELDED CONNECTION

Automation Products Group

Model #:

Part #: Range:

1025 West 1700 North

Logan, UT 84321 USA
Phone [phone]

.75

[19.1]

LENGTH PER ORDER

.75

[19.1]

3.92

[99.6]

.25

[6.4]

.55

[14.0]

LOC-TITE®

Automation Products Group

Model #:

Part #: Range:

1025 West 1700 North

Logan, UT 84321 USA

Phone [phone]

3/4" HEX

1/4" NPT

K1, E4 - TAMPER RESISTANT NUT, 4-PIN M12

EUROFAST M12 w/ TAMPER RESISTANT NUT & LOC-TITE®

CAN - PROCESS CONNECTION w/ LOC-TITE®

3.97

[100.8]

.25

[6.4]

.55

[14.0]

WELDED CONNECTION

Automation Products Group

Model #:

Part #: Range:

1025 West 1700 North

Logan, UT 84321 USA

Phone [phone]

.75

[19.1]

M12x1

TAMPER RESISTANT
w/ LOC-TITE®

.75

[19.1]

3/4" HEX

1/4" NPT

TAMPER RESISTANT
w/ LOC-TITE®

K2, E5 - TAMPER RESISTANT NUT, PIGTAIL

CABLE PIGTAIL W/ TAMPER RESISTANT NUT & LOC-TITE®

CAN - PROCESS CONNECTION WELDED

Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]

3/4" HEX

1/4" NPT

K3, E3 - WELDED 4-PIN BAYONET

4-PIN BAYONET, WELDED CONNECTION

CAN - PROCESS CONNECTION WELDED

WELDED CONNECTION

1