APG PT-L9, PT-L13 Operating Manual

PRODUCTS

AUT OMATION

Operator’s Manual

GROUP, INC.

PT-L9/L13/L14-C

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: [phone] • Fax: [phone] • www .apgsensors.com • E-mail: [e-mail]

PT-L9/L13/L14-C Rev. B3, 11/08

T able of Content s

Warranty ......................................................................................... 3

Instructions ..................................................................................... 4

Zero Trimming/Calibration.......................................................... 4

Output .......................................................................................... 4

W iring Information ...................................................................... 4

2

APG...Providing tailored solutions for measurement applications

T el: 1/888/525-7300 • Fax: [phone] • www.apgsensors.com • [e-mail]

Automation Products Group, Inc.

Rev. B3,11/08 PT-L9/L13/L14-C

• Warranty and Warranty Restrictions

APG warrants its products to be free from defects of material and workmanship
and will, without charge, replace or repair any equipment found defective upon
inspection at its factory, provided the equipment has been returned,
transportation prepaid, within 18 months from date of shipment from factory .

THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER
W ARRANTIES NOT EXPRESSL Y SET FOR TH HEREIN, WHETHER
EXPRESSED OR IMPLIED BY OPERATION OF LAW OR OTHER WISE
INCLUDING BUT NOT LIMITED T O ANY IMPLIED WARRANTIES OF
MERCHANT ABILITY OR FITNESS FOR A PAR TICULAR PURPOSE.

No representation or warranty, express or implied, made by any sales
representative, distributor, or other agent or representative of APG which is not
specifically set forth herein shall be binding upon APG. APG shall not be liable
for any incidental or consequential damages, losses or expenses directly or
indirectly arising from the sale, handling, improper application or use of the
goods or from any other cause relating thereto and APG’s liability hereunder, in
any case, is expressly limited to the repair or replacement (at APG’s option) of
goods.

Warranty is specifically at the factory. Any on site service will be provided at
the sole expense of the Purchaser at standard field service rates.

All associated equipment must be protected by properly rated electronic/
electrical protection devices. APG shall not be liable for any damage due to
improper engineering or installation by the purchaser or third parties. Proper
installation, operation and maintenance of the product becomes the
responsibility of the user upon receipt of the product.

Returns and allowances must be authorized by APG in advance. APG will
assign a Return Material Authorization (RMA) number which must appear on
all related papers and the outside of the shipping carton. All returns are subject
to the final review by APG. Returns are subject to restocking charges as
determined by APG’s “Credit Return Policy”.

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: [phone] • Fax: [phone] • www .apgsensors.com • [e-mail]

3

PT-L9/L13/L14-C Rev. B3, 11/08

4

or

• Instructions

All units are factory calibrated prior to shipment.

1. Zero Trimming/Calibration

Because the can is closed and sealed, any adjustments and calibrations must

be done at the factory.

2. Output

The PT -L9/L13/L14-C transducers are a mV/V output device. The output is
dependent on the excitation. These devices are conditioned for 10 VDC
excitation.

Device Output Type Excitation Full Scale Output

L9 10 mV/V 10 VD C 100 mV
L13 3 mV/V 10 VDC 30 mV
L14 5 mV/V 10 VDC 50 mV

3. Wiring Information

Below , are the pin out diagrams, circuit diagrams, and pin out table for the

mV/V circuit, as needed to assist you in wiring your transducer .

Pin Bayonet Connect

4

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

T el: 1/888/525-7300 • Fax: [phone] • www.apgsensors.com • [e-mail]

Rev. B3, 10/08 PT-L9/L13/L14-C

Notes

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: [phone] • Fax: [phone] • www .apgsensors.com • [e-mail]

5

PT-L9/L13/L14-C Rev. B3, 11/08

Notes

APG...Providing tailored solutions for measurement applications

Automation Products Group, Inc.

6

Tel: [phone] • Fax: [phone] • www .apgsensors.com • [e-mail]

Rev. B3, 10/08 PT-L9/L13/L14-C

Notes

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: [phone] • Fax: [phone] • www .apgsensors.com • [e-mail]

7

AUT OMATION

APG ...Providing tailored solutions

for measurement applications

Automation Products Group, Inc.

Tel: [phone]
Fax: [phone]

e-mail: [e-mail]

www.apgsensors.com

GROUP, INC.

1/435/753-7300

PRODUCTS

Automation Products Group, Inc.

1025 W. 1700 N.

Logan, UT 84321

To order additional copies of this manual, ask for APG part number PN9000050 Rev. B3, 11/08