Page 1
PT-L1-L3-L10
Flexible by Design
Our amplied output pressure transmitters are the economical answer for all applications requiring
high accuracy and reliability over a wide range of pressures. The PT-L1/L3/L10 pressure
transmitters offer ranges from vacuum to 10,000 psi, all stainless steel construction, high burst
pressure, and high acuracy.
Features
• Cost effective
• High overpressure capability
• Zero and span adjustments
• Single piece stainless steel process tting and sensor
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 sales@apgsensors.com
Page 2
PT-L1/L3/L10 Specications
Performance
• Accuracy
B.F.S.L. ≤ 0.25% of full scale
NIST up to ±0.1% available on select ranges
• Temp Compensation Range:
Up to 0º - 130ºF (-17º - 54ºC)
• Extended Temp Compensation Range: (Optional)
Up to -40º - 180ºF (-40º - 82ºC)
Connectivity
• Output:
4-20 mA
0-5 VDC
0-10 VDC
• Internet Connectivity:
RST-5001 (4-20 mA version only)
Environmental
• Operating Temperature:
-40º - 180ºF (-40º - 82ºC)
Electrical
• Supply Voltage:
4-20 mA: 10 - 36 VDC
0-5 VDC: 9 - 33 VDC
0-10 VDC: 14 - 33 VDC
• Electrical Protection:
Reverse polarity
Physical
• Material: 15-5 or 316L SS
Programming
• Field Calibration:
Zero and Span adjust
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 sales@apgsensors.com
2
Page 3
Options
PT- ____ - C - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____ - _____
A B C D E F G H I J K L
A. Operation
□ L1 4-20 mA □ L11 1-6 VDC
□ L3 0-5 VDC □ L12 1-5 VDC
□ L10 0-10 VDC
B. Common Pressure Ranges
□ 5 □ 50 □ 200 □ 1000 □ 5000
□ 15 □ 60 □ 300 □ 2000 □ 10000
□ 30 □ 100 □ 500 □ 3000
*Other ranges available
C. Unit of Measure
▲
□ PSI
□ bar □ inH
□ kPa □ inHg
O □ kgcm2
2
□ mbar □ mmHg □ fsw
D. Pressure Type
□ G Gauge □ A Absolute
□ CG Compound Gauge □ S Sealed
□ V Vac
E. Electrical Connection
Mating connector sold separately
□ E1 6-pin circular □ E5
▲
Pigtail with cable
□ E3 4-pin bayonet □ E17 6-pin bayonet
□ E4 4-pin M12 Micro connector
G. Process Connection
▲
□ P0
1/4-18 NPTM □ P16 PT 1/4 (BSPP) male
□ P2 1 1/2 sanitary □ P22 G3/8 (3/8 BSPP) male
□ P4 7/16-SAE male ush mount
□ P5 1/4-18 NPTF □ P23 G1/2 (1/2 BSPP) male
□ P7 7/16-20 SAE male □ P26 7/16-20 UNF male w/
cone
□ P14 1/8-27 NPTM □ P30 High Pressure Sno Trik
(M-250C, Autoclave male)
H. Accuracy
▲
□ N0
±0.25%
□ N1 ±0.25% with NIST certication
□ N2 ±0.1% with NIST certication
□ N3 ±1% or better
□ N4 ±1% or better with NIST certication
□ N12 ±0.5% (standard on ranges greater than 5000
psi and voltage output only)
□ N13 ±0.5% with NIST certication
I. Materials
□ M0 15-5 SS
▲
□ M1
316L SS or 316L/Hastelloy
□ M5 Hastelloy (minimum quantities required)
J. Vibration
▲
□ V0
Standard
□ V1 High (not available with K0)
F. Elelectircal Cable Length
Use with E1, E3, E4, E17 connections
□ W0 0 ft
Use with E5 pigtail connection
□ W1 2 ft (0.6 m) □ W4 25 ft (7.6 m)
□ W2 5 ft (1.5 m) □ W5 50 ft (15.2 m)
□ W3 10 ft (3 m)
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 sales@apgsensors.com
3
K. Can Assembly
▲
□ K0
Knurl
□ K1 Tamper resistant with Loc-Tite
□ K2 Tamper resistant with weld
□ K3 Weld can to tting and connector
L. Temperature
▲
□ S0
Standard: 0º - 130ºF (-17º - 54ºC)
□ S1 Extended: -40º - 180ºF (-40º - 82ºC)
Note: ▲Indicates this option is standard.
Page 4
Accessories
Please order separately, by part number.
Description Part Number
4-pin bayonet mating connector (E3) 509010*
4-pin female (M12) mating connector (E4)
**Specify X as 2 or 5 m cable
6-pin circular mating connector (E1) 509110*
6-pin bayonet mating connector (E17) 509165*
*To order a connector with cable you will need to specify the operation and cable length by adding “00XX” to the
part number (XX=cable length).
- Specify cable: 2, 5, 10, 25 or 50 ft
Example: 509010-0025 = 25 feet of cable
135407-00XX
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 sales@apgsensors.com
4
Loading...