APG
General Purpose Digital
Pressure Gauge
Series: PG5
®
The PG5 digital pressure gauge is the foundation to our PG series of gauges. Built for accurate pressure measurements, the PG5 eliminates inaccuracies for a measurement you can trust.
Features
• Large, full 5-digit display with 0.4 in. characters
• Available ranges from vacuum up to 10,000 psi
• Tare, Peak Hold, and Max/Min functions standard
• ±0.25% accuracy of full scale
• User selectable units of measure
(psi, kPa, mmHg, cmHg, mbar, bar, inH2O, ftH2O, kg/cm2)
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
Rev. A1, 01/18/2019
APG
PG5 Specications
6-Pin
Connector
1.25”
31.8 mm
2.66”
67.6 mm
0.625
HEX
15.9
1/4” 18 NPT
1.55”
39.4 mm
Performance
• Accuracy (linearity & hysteresis):
±0.25% of full scale (BFSL)
±0.1% accuracy in selected ranges
• Stability – One Year Zero Drift: <±1% FS
• Thermal Zero Shift: ±0.02% FS/ ºF
• Thermal Sensitivity Shift: ±0.02% FS/ ºF
• Life: 10 million cycles minimum
• Adjustments: Auto zero, tare
Connectivity
• Output Options:
4-20 mA, 0-2 VDC, 0-5 VDC
Environmental
• Compensated Temp: 20º - 130ºF (-7º - 54ºC)
• Storage Temp: -40º - 160ºF (-40º - 71ºC)
• Operating Temp: 0º - 160ºF (-18º - 71ºC)
Certication
• NIST certication on select ranges
• CE
Electrical
• Battery Option:
(1) Standard 9V (typical life 700 hrs)
Auto-o: 2 - 32 minutes
Low battery detection with 25% increments
• External Power Option: 9-28 VDC
• 6-Pin Connector: R04-R6M
Programming
• Programmable Features:
User selectable units of measure, Max/Min Reset
& Reading, Peak-Hold, Tare, Sample Rate, Range
Adjustment, Adjustable Resolution, Auto-O
Physical
• Size: 2.66” x 1.55” (67.6 x 39.4 mm)
Connection: 1.25” (31.8 mm)
• Weight: 0.36 lb (163 grams)
• Injected molded case (EMI-X ® PDX-W-88341)
• Wetted Materials:
316L SS: up to 5,000 psi
15-5 SS: 5,000 psi and above
• Display: 5 digit LCD, 0.4 in. digits
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
2
Rev. A1, 01/18/2019
APG
Common Model Congurations
9V Battery / No Output, 1/4” NPTM Bottom Port
Model Number Model Description
PG5-15.00-PSIA-F0-L0-E0-P0-N0 0-15 PSI, Absolute Pressure Reference
PG5-15.00-PSIG-F0-L0-E0-P0-N0 0-15 PSI, Gauge Pressure Reference
PG5-30.00-PSIG-F0-L0-E0-P0-N0 0-30 PSI, Gauge Pressure Reference
PG5-50.00-PSIG-F0-L0-E0-P0-N0 0-50 PSI, Gauge Pressure Reference
PG5-100.00-PSIG-F0-L0-E0-P0-N0 0-100 PSI, Gauge Pressure Reference
PG5-200.0-PSIG-F0-L0-E0-P0-N0 0-200 PSI, Gauge Pressure Reference
PG5-300.0-PSIG-F0-L0-E0-P0-N0 0-300 PSI, Gauge Pressure Reference
PG5-500.0-PSIG-F0-L0-E0-P0-N0 0-500 PSI, Gauge Pressure Reference
PG5-1000-PSIS-F0-L0-E0-P0-N0 0-1,000 PSI, Sealed Gauge Pressure Reference
PG5-5000-PSIS-F0-L0-E0-P0-N0 0-5,000 PSI, Sealed Gauge Pressure Reference
PG5-10000-PSIS-F0-L0-E0-P0-N0 0-10,000 PSI, Sealed Gauge Pressure Reference
PG5 Accessories
Please order separately, by part number.
Description Part Number
6-pin circular mating connector (E1) 509110
6-pin circular mating connector (E1) with cable 509110-00BB (B=cable length)
Panel mount bracket with screws (rear port only) 512598
Power supply w/8 pin terminal block (cable and mating connector not included) 511643
AC to DC external pwr supply (includes E23 Power Jack Barrel 2.5mm connector) 511644
Rear Port Rubber Boot 512628
Bottom Port Rubber Port 512627
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
3
Rev. A1, 01/18/2019
APG
Model Conguration Options
Model Number: PG5 - _____ - _____ - _____ - _____ - _____ - _____
A B C D E F
®
A. Common Pressure Ranges
□ 5.00 □ 50.00 □ 200.0 □ 1000 □ 5000
□ 15.00 □ 60.00 □ 300.0 □ 2000 □ 10000
□ 30.00 □ 100.00 □ 500.0 □ 3000
*Other ranges available
B. Pressure Type
□ PSIG
▲
Gauge (≤ 500 psi)
□ PSICG Compound gauge (≤ 500 psi)
□ PSIV Vacuum
□ PSIA Absolute (≤ 500 psi)
□ PSIS Sealed gauge (≥ 500 psi)
C. Port
▲
□ F0
Bottom
□ F1 Rear
□ F2 Bottom with O
□ F3 Rear with O
2
clean
2
clean
□ F5-XX* Remote transducer with mV sensor-bottom
□ F6 Rear port with panel bracket installed
□ F7 Bottom port with rubber boot installed
□ F10-XX* Remote transducer with mV sensor-rear
*XX for feet of cable, 30 ft max.
D. Operation (see Operation Table)
□ L0-E0
▲
9V battery (no output)
□ L1-E1* 4-20 mA (loop powered) output
□ L2-E23† 0-2 VDC output
□ L3-E1* 0-5 VDC output
□ L4-E23*† External Power
□ L8-E0 Lithium battery (no output)
*Auto-o options are not available with L1, L3, or L4
†E23 mating connector included
E. Process Connection
▲
□ P0
1/4 - 18 NPTM
□ P7 7/16 - 20 SAE Male
□ P14 1/8 - 27 NPTM
□ P16 PT 1/4 (BSPM 1/4)
*Other options available
F. Accuracy
▲
□ N0
±0.25%
□ N1 ±0.25% with NIST certication
□ N2 ±0.1% with NIST certication (select ranges)
Note: ▲Indicates this option is standard.
Operation Table
L1: 4-20 mA L2: 0-2 VDC L3: 0-5 VDC
Input
Voltage
(Excitation)
Input
Current
Output
Output/
Input
Resolution 14 bit 14 bit 14 bit
Protection
9 VDC min - 28
VDC max
3-30 mA max 6 mA max
4-20 mA
±0.16 mA at set
points
2 wire
loop powered
Reversed
Polarity
Battery
Powered
Zero set point
±0.15 C with a 2
VDC span V0.02
VDC
2 wire
9-28 VDC
0-5 VDC /
±0.05 VDC at
set points
3 wire
Non-isolated
Reversed
Polarity
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
Document #9004553; Part #200262 Rev. A1, 01/18/2019
Loading...