APG PG5 datasheet

PG5 Digital Pressure Gauge
The PG5 digital pressure gauge is the foundation to our PG series of gauges. Built for accurate pressure measurements the PG5 eliminates inaccuracies for a measurement you can trust.
Features
Large, full 5-digit display with 0.4 in. characters
Available ranges from vacuum up to 10,000 psi
Tare, Peak Hold, and Max/Min functions standard
±0.25% accuracy of full scale
Automation Products Group, Inc. www.apgsensors.com tel. 888.525.7300 sales@apgsensors.com
PG5 Specications
6-Pin
Connector
1.25”
31.8 mm
2.66”
67.6 mm
0.625 HEX
15.9
1/4” 18 NPT
1.55”
39.4 mm
Performance
• Accuracy (linearity & hysteresis): ±0.25% of full scale (BFSL) ±0.1% accuracy in selected ranges
• Stability – One Year Zero Drift: <±1% FS
• Thermal Zero Shift: ±0.02% FS/ ºF
• Thermal Sensitivity Shift: ±0.02% FS/ ºF
• Life: 10 million cycles minimum
• Adjustments: Auto zero, tare
Connectivity
• Output Opons: 4-20 mA, 0-2 VDC, 0-5 VDC
Environmental
• Compensated Temp: 20º - 130ºF (-7º - 54ºC)
• Storage Temp: -40º - 160ºF (-40º - 71ºC)
• Operang Temp: 0º - 160ºF (-18º - 71ºC)
Certication
• NIST cercaon on select ranges
• CE
Electrical
• Battery Option: (1) Standard 9V (typical life 700 hrs) Auto-off: 2 - 32 minutes Low battery detection with 25% increments
• External Power Option: 9-28 VDC
• 6-Pin Connector: R04-R6M
Programming
• Programmable Features: User selectable units of measure, Max/Min Reset & Reading, Peak-Hold, Tare, Sample Rate, Range Adjustment, Adjustable Resoluon, Auto-O
Physical
• Size: 2.66” x 1.55” (67.6 x 39.4 mm) Connecon: 1.25” (31.8 mm)
• Weight: 0.36 lb (163 grams)
• Injected molded case (EMI-X ® PDX-W-88341)
• Weed Materials: 316L SS: up to 10,000 psi
• Display: 5 digit LCD, 0.4 in. digits
Automation Products Group, Inc. www.apgsensors.com tel. 888.525.7300 sales@apgsensors.com 2
Options
Part Number: PG5 - _____ - _____ - _____ - _____ - _____ - _____ A B C D E F
A. Common Pressure Ranges
5.00 50.00 200.00 1000 5000
15.00 60.00 300.0 2000 10000
30.00 100.00 500.0 3000
*Other ranges available
B. Pressure Type
PSIG
Gauge (up to 500 psi)
PSICG Compound gaugePSIV VacuumPSIA AbsolutePSIS Sealed gauge (greater than 500 psi)
C. Port
F0
Bottom
F1 RearF2 Bottom with OF3 Rear with O
2
clean
2
clean
F5 Remote transducer with mV sensor-bottomF6 Rear port with panel bracket installedF7 Bottom port with rubber boot installedF10 Remote transducer with mV sensor-rear
D. Operation (see operation table)
L0-E0
9V battery
L1-E1 4-20 mA (loop powered) outputL2-E23 0-2 VDC output
L3-E1 0-5 VDC output L4-E23 External Power
*Auto-off options are not available with L1, L3, or L4 *E23 mating connector included
E. Process Connection
P0
1/4 - 18 NPTM
P7 7/16 - 20 SAE MaleP14 1/8 - 27 NPTMP16 PT 1/4 (BSPM 1/4)
*Other options available
F. Accuracy
N0
±0.25%
N1 ±0.25% with NIST certicationN2 ±0.1% with NIST certication (select ranges)
Note: ▲Indicates this option is standard.
Operation Table
L1: 4-20 mA L2: 0-2 VDC L3: 0-5 VDC
Input Voltage (Excitation)
Input Current
Output
Output/
Input
Resolution 14 bit 14 bit 14 bit
Protection
9 VDC min ­28 VDC max
3-30 mA max 6 mA max
4-20 mA ±0.16 mA at
set points
2 wire loop powered
Reversed
Polarity
Battery
Powered
Zero set point ±0.15 C with a 2 VDC span V0.02 VDC
2 wire
9-28 VDC
0-5 VDC / ±0.05 VDC
at set points
3 wire Non-isolated
Reversed
Polarity
PG5 Accessories
Please order separately, by part number.
Description Part Number
6-pin circular mating connector (E1) 509110
6-pin circular mating connector (E1) with cable 509110-00BB (B=cable length)
Panel mount bracket with screws (rear port only) 512598
Power supply w/8 pin terminal block (cable and mating connector not included) 511643
AC to DC external pwr supply (includes E23 Power Jack Barrel 2.5mm connector) 511644
Rear Port Rubber Boot 512628
Bottom Port Rubber Port 512627
Automation Products Group, Inc. www.apgsensors.com tel. 888.525.7300 sales@apgsensors.com 3
Automation Products Group, Inc. www.apgsensors.com tel. 888.525.7300 sales@apgsensors.com 4
Loading...