APG PG-2000 datasheet

APG

Rev. 6.08

Automation Products Group, Inc.

®

PG-2000

Digital Pressure Gauge

■

Large 4 digit display with 0.5 in.
digits

■

Available ranges from 0 up to
2,000 psi

■

Rugged, chemical-resistant case

■

Display capability to 2000

■

Battery operated with convenient
on/off switch

■

±0.25% accuracy of full scale (on
selected ranges)

■

Gauge reference pressure

■

Internally complaint to CE

■

On/off button

■

1/4” NPTM process connection

Options

■

16 minute auto-off optional at no
extra cost

■

Rear pressure port

■

Zero adjust knob

■

External power

■

±0.25% accuracy with NIST
certification (on select ranges)

Accessories

■

Panel mount flange (rear pressure
port only)

■

AC to DC external power supply

■

Shock dampening rubber
boot

PG-2000 Digital Pressure Gauge

■

Operational Description

Battery Powered Digital Gauge
Offers High Accuracy at Low Cost

Utilizing a solid state design,
the PG-2000 incorporates a semi­conductor strain gage pressure
transducer as the sensing element,
conditioned by state of the art
surface mount electronics. e unit
has a very low power requirement,
resulting in a battery life of two
years in typical use. e large 4
digit display and ±0.25% full scale
accuracy allows it to replace much
larger mechanical gauges.

■

Applications

No special tools or adaptors
are required for installation of the
PG-2000. is makes the unit an
easy, cost-effective replace ment for
less accurate, standard mechanical
gauges. e unit’s long life, ease
of operation, high accuracy, and
low cost make it perfect for all
applications where standard
2 1/2 in. or larger mechanical gauges
have been used.

Automation Products Group, Inc.

1025 West 1700 North Tel. [phone]
Logan, UT 84321 USA Fax [phone]

1

w w w . a p g s e n s o r s . c o m

s a l e s @ a p g s e n s o r s . c o m

APG

Automation Products Group, Inc.

®

PG-2000 Digital Pressure Gauge

■

Specications

Performance

Standard Pressure Ranges: See table at right
Overpressure: 2x full scale
Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever is

greater; NIST traceable certification also available

Stability - One Year Zero Drift: 15-5: < ±0.5% F.S., 316: < ±1% F.S.
Thermal Zero Shift > 100 psi: ±0.02% F.S./°F
≤ 100 psi: ±0.04% F.S./°F
Thermal Sensitivity Shift > 100 psi: ±0.02% F.S./°F
≤ 100 psi: ±0.04% F.S./°F
Life: 10 million cycles minimum

Environmental

Compensated Temp: 20 to 130°F (-7 to 54°C)
Storage Temp: -40 to 160°F (-40 to 71°C)
Operating Temp: 0 to 160°F (-18 to 71°C)

Electrical

Batteries: Standard 9 V (1), user replaceable (2-year life typical with auto off option)
External Power: 10-32 VDC
Display Type: 4 digit LCD, 0.5 in. digits
Display Resolution: 1 part in 2000
Low Battery Detection: Displays “LBAT” @ 4.0 VDC ±5% with Vin = 9.0 VDC
Adjustments: Front accessible “Z”: Zero Adjust; “S”: Span Adjust
Auto Off: 16 minutes

Physical

Weight: 0.36 lb.
Construction Materials
Case: Injection molded case material EMI-X® PDX-W-88341
Wetted Materials: 15-5 SS; 316L SS available at no extra charge (High resolution ranges under

100 psi, in 316L SS incorporate a Hastelloy® C276 diaphragm); One piece Hastelloy® fitting also
available (minimum quantities required)

External Power Connector: 1/8 in. – 3 conductor (included with optional external power selection)
External Power Mating Connector: 1/8 in. – 3 conductor (included with optional external power

selection)
Process Cavity Volume: 0.073 in.

Specifications are subject to change without notice.

■

Linear Accuracy Chart

Display Standard Accuracy

Full Scale Display Resolution Linear Accuracy Options

20.00* 0.01 0.25% N0, N1

100.0 0.1 0.25% N0, N1

160.0 0.1 0.25% N0, N1

200.0 0.1 0.25% N0, N1

250.0 0.1 Better than 1% N3, N4

500.0 0.1 Better than 1% N3, N4

1000 1 0.25% N0, N1

2000 1 0.25% N0, N1

*Requires high resolution option
Note: This table lists linear accuracies for specific ranges. For an explanation of how linear accuracy is calculated, please contact APG.

■

Common Pressure Ranges

Range Unit of Display

Option Range Measure Resolution

20 0 to 20 psi 0.01*

100 0 to 100 psi 0.1

160 0 to 160 psi 0.1

200 0 to 200 psi 0.1

250 0 to 250 psi 0.1

500 0 to 500 psi 0.1

1000 0 to 1000 psi 1

2000 0 to 2000 psi 1

*Requires G2 option when ordering.

■

Electrical Cable Length Table

Cable Length

W0 ▲ 0 ft.

W1 2 ft. (0.6 m)

W2 5 ft. (1.5 m)

W3 10 ft. (3 m)

W4 25 ft. (7.6 m)

W5 50 ft. (15.2 m)

Automation Products Group, Inc.

1025 West 1700 North Tel. [phone]
Logan, UT 84321 USA Fax [phone]

2

w w w . a p g s e n s o r s . c o m

s a l e s @ a p g s e n s o r s . c o m

APG

Automation Products Group, Inc.

Body Center Tip

(Note: Not to scale)

External Power Plug

Mfg.

Date:

Accuracy:

ring:

OPTIONAL
REAR PORT

1.20

30.5

1.50

38.1

Z

Automation Products Group

Logan, Utah 84321

PSI

S

3/4 HEX

1/4 NPT

2.66

67.6

OPTIONAL ZERO
ADJ. KNOB

Mfg.

Date:

Accuracy:

ring:

OPTIONAL
REAR PORT

1.20

30.5

1.50

38.1

®

PG-2000 Digital Pressure Gauge

■

Dimensions — in./mm

■

Ordering Information

PG-2000 – – PSI – – – – – – – – P0 – –

Range

20.00

100.0

160.0

200.0

250.0

500.0

1000

2000

Pressure Type

▲

G

Gauge

G2 High resolution gauge

Auto Off

▲

A0

No auto off

A4 16 minute auto off

Zero Adjustment

▲

Z0

Cover screw

Z1 Z knob

Port

▲

F0

Bottom

F1 Rear

F6 Rear port with panel bracket

F7 Bottom port with rubber boot

Operation

▲

L0

9V battery

L4 External power

Electrical Connection

▲

E0

No connector

E2 1/8 in., 3-conductor external power

Electrical Cable Length

W0 0 ft. (Use with E2 (no cable) connections)

W1-W5 Use with E2 connections. (See Electrical Cable Length chart for details)

Accuracy (see Linear Accuracy Chart for details)

▲

N0

±0.25%

N1 ±0.25% with NIST certification

N3 ±1%

N4 ±1% with NIST certification

Materials

▲

M0

15-5 SS

M1 316L SS

▲

This option is standard.

Accessories

Please order separately, by part number. When ordering a flange or boot as an accessory, they

will not be installed on the gauge.

Description Part Number

Panel mount flange (rear port only) 512598

AC to DC external power supply (includes E2 mating connector) 511641

Rubber boot 512625

Automation Products Group, Inc.

1025 West 1700 North Tel. [phone]
Logan, UT 84321 USA Fax [phone]

3

w w w . a p g s e n s o r s . c o m

s a l e s @ a p g s e n s o r s . c o m