How it Works
APG
Loading...
MPX-E
Operating Manual
42 pgs1.99 Mb0
Specifications
10 pgs998.47 Kb0

APG MPX-E Specifications

Download
APG
Explosion Proof and Non-Incendive Magnetostrictive Level Sensors Series: MPX
®
C
US
level measurement applications. The MPX-R’s large, buoyant, and robust oat allows it to be used in harsh applications where
fouling or buildup might otherwise be of concern. The MPX-E’s lighter weight design allows it to be used in applications where space is limited. The MPX-E Chemical has a chemical resistant coating, allowing for use in corrosive, acidic, and marine environ­ments. And the MPX-F’s exible stainless steel stem allows for installation in tall tanks without needing a crane.
Features
• Class 1 Division 1 Groups C & D, Class 1 Zone 1, Class 1 Zone 2
• Highly accurate and repeatable readings
• 4-20 mA, RS-485 (Modbus RTU) output
• Rugged and reliable, lengths up to 32 feet (9.75 m)
• Dual level (interface) measurement
• Tank volume/level, strapping table
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
Rev. D, 06/07/2017
APG
MPX-E Specications
MPX-E Floats
5.70”
144.8 mm
5.00”
127.0 mm
2.0”
50.8 mm
1.38”
35.05 mm
Floats A, B
2.06”
52.32 mm
Floats C, D
1.63”
41.40 mm
1.87”
47.50 mm
2.20”
55.88 mm
Float E
1.78”
45.21 mm
Float F
1.47”
37.34 mm
0.27” (x2)
4.25”
108.0 mm
3/4” NPT
7.39”
187.7 mm
Performance
• Resolution: 4-20 mA: 14 bit DAC Modbus: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• RS-485: optional RST-6001 USB to RS-485 converter
• 4-20 mA: factory set or optional RST-4100 programming module.
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 0.5” ø 316L SS
• Stem Length: 1 - 12.75 ft. (0.3 - 3.9 m)
Electrical
• Electrical Connection: Terminal Block, 12-24 VDC
• Total current draw: 4-20 mA: (single) 22 mA, (dual) 44 mA Modbus (RS-485): 25 mA
Connectivity
• Output:
Single or dual loop-powered 4-20 mA Modbus RTU (RS-485) with optional Temperature out-
put
Certication
• NEMA 4X, IP65
• CSA:
Class I Division 1 Groups C & D T4 (Ta 85°C)
Class I Division 2 Groups C & D T4 (Ta 85°C)
Class I, Zone 1; AEx d IIB T4 Class I, Zone 2; AEx nA IIB T4 Ex d IIB T4 Ex nA IIB T4
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
2
Rev. D, 06/07/2017
APG
Model Conguration Options
Model Number: MPX - _E_ _____ _____ - _____ _____ - _____ _____ _____ _____ - _____ - _____ _____ - ______ A B C D E F G H I J K L N
A. Stem Type
□ E 0.5 in. diameter 316L SS
B. Output
□ 2 Single oat, 4-20 mA (loop powered, 2 wire) □ 3 Dual oat, 4-20 mA (loop powered, 3 wire) □ 4 Modbus RTU, surge/lightning protection
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ A Small Housing □ B Large Housing with window □ C Small Housing with window
D. Float 1 (Top Float)
□ A 316L SS Round (0.65 SG) □ B 316L SS Round (0.92 SG) □ C 316L SS Cylindrical (0.65 SG) □ D 316L SS Cylindrical (0.92 SG) □ E Buna-N (0.5 SG) □ F 316 SS 3A Cylindrical (0.5 SG)
E. Float 2 (optional)
□ N None □ B 316L SS Round (0.92 SG)
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 2, 2.5, 3, 4)
□ N None □ O Other
G. Mounting Size
□ __ See Mounting Type for available sizes
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 12 in. - Max. 153 in.
K. End Plug Options
▲
□ __
0.5 in. Stem, Standard
□ 1 0.5 in. Stem, Keyhole for Cotter Pin
L. Float Stop Options
▲
□ __
0.5 in. Stem, 316L SS, 1 piece, 0.75 in. OD
□ A 0.5 in. Stem, 316L SS, 1 piece, 1.5 in. OD
N. Optional Temperature Sensor
MPX-E4
□ T__ RTD in stem, with location in inches from bottom of
probe (default is 6”)
N. 4-20 Output Set Points
MPX-E2/E3
□ A__ 4mA set point location, in inches from bottom of probe □ B__ 20mA set point location, in inches from top of probe
▲
This option is standard
MPX Accessories
Please order separately, by part number.
Description Part Number
Programming Module
RST-6001 (Modbus: MPX-x4) 125734
RST-4100 (4-20mA: MPX-x2, MPX-x3) 125759
*sold with 6 ft USB cable
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
3
Rev. D, 06/07/2017
APG
MPX-E Chemical Specications
5.70”
144.8 mm
MPX-E Chemical Float
Float G
1.91”
48.42 mm
1.88”
47.63 mm
5.00”
127.0 mm
0.27” (x2)
Performance
• Resolution: 4-20 mA: 14 bit DAC Modbus: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• RS-485: optional RST-6001 USB to RS-485 converter
• 4-20 mA: factory set or optional RST-4100 programming module.
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• Maximum Operating Pressure: 30 PSIA @ 70°F / 21°C
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 0.5” ø 316L SS with chemical resistant coating
• Stem Length: 1 - 12.75 ft. (0.3 - 3.9 m)
• Float: 1-7/8” Ø Kynar, 0.66 SG
3/4” NPT
7.13”
181.1 mm
4.25”
108.0 mm
Electrical
• Electrical Connection: Terminal Block, 12-24 VDC
• Total current draw: 4-20 mA: (single) 22 mA Modbus (RS-485): 25 mA
Connectivity
• Output:
Loop-powered 4-20 mA Modbus RTU (RS-485) with optional Temperature out-
put
Certication
• NEMA 4X, IP65
• CSA:
Class I Division 1 Groups C & D T4 (Ta 85°C)
Class I Division 2 Groups C & D T4 (Ta 85°C)
Class I, Zone 1; AEx d IIB T4 Class I, Zone 2; AEx nA IIB T4 Ex d IIB T4 Ex nA IIB T4
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
4
Rev. D, 06/07/2017
APG
Model Conguration Options
Model Number: MPX - _E_ _____ _____ - __G__ __N__ - __P__ __2__ __W__ __D__ - _____ - __4__ _____ - ______ A B C D E F G H I J K L N
A. Stem Type
□ E 0.5 in. diameter 316L SS
B. Output
□ 2 Single oat, 4-20 mA (loop powered, 2 wire) □ 4 Modbus RTU, surge/lightning protection
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ A Small Housing □ B Large Housing with window □ C Small Housing with window
D. Float 1
□ G Kynar Cylindrical (0.66 SG)
E. Float 2
□ N None
F. Mounting Type
□ P NPT Plug 150#
G. Mounting Size
□ 2 Size 2
▲
This option is standard
H. Mounting Connection
□ W Welded (xed)
I. Stem Material
□ D Chemical resistant coating on 316L SS
J. Total Stem Length in Inches
□ __ Min. 12 in. - Max. 153 in.
K. End Plug Options
□ 4 0.5 in. Stem, chemical resistant coating on 316L SS
L. Float Stop Options
▲
□ F
Top Stop only, 1 piece, 0.5 in. Stem, Kynar
□ G Bottom Stop only, 1 piece, 0.5 in. Stem, Kynar □ H Top & Bottom Stops, (2) 1 piece, 0.5 in. Stem, Kynar □ N No Float Stops
N. Optional Temperature Sensor
MPX-E4
□ T__ RTD in stem, with location in inches from bottom of
probe (default is 6”)
N. 4-20 Output Set Points
MPX-E2
□ A__ 4mA set point location, in inches from bottom of probe □ B__ 20mA set point location, in inches from top of probe
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
5
Rev. D, 06/07/2017
APG
MPX-R Specications
Floats Y, Z
5.5”
139.7 mm
Floats W, X
4.76”
120.9 mm
Floats L, M
5.5”
139.7 mm
3.065”
77.85 mm
5.0”
127 mm
2.000”
50.8 mm
MPX-R Floats
Floats U, V
Floats S, T
Floats P, R
139.7 mm
5.88”
150 mm
2.80”
71.12 mm
5.5”
3.03”
76.96 mm
3.08”
78.23 mm
2.800”
50.8 mm
5.70”
144.8 mm
5.00”
127.0 mm
0.27” (x2)
4.25”
108.0 mm
3/4” NPT
7.39”
187.7 mm
Performance
• Resolution: 4-20 mA: 14 bit DAC Modbus: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• RS-485: optional RST-6001 USB to RS-485 converter
• 4-20 mA: factory set or optional RST-4100 programming module.
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 1.0” ø 316L SS
• Stem Length: 4 - 31.5 ft. (1.22 - 9.60 m)
• Float Sleeve (Floats P & R only):
.035” thick Titanium 2
Electrical
• Electrical Connection: Terminal Block, 12-24 VDC
• Total current draw: 4-20 mA: (single) 22 mA, (dual) 44 mA Modbus (RS-485): 28 mA
Connectivity
• Output:
Single or dual loop-powered 4-20 mA Modbus RTU (RS-485) with Temperature output
Certication
• NEMA 4X, IP65
• CSA:
Class I Division 1 Groups C & D T4 (Ta 85°C)
Class I Division 2 Groups C & D T4 (Ta 85°C)
Class I, Zone 1; AEx d IIB T4 Class I, Zone 2; AEx nA IIB T4 Ex d IIB T4 Ex nA IIB T4
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
6
Rev. D, 06/07/2017
APG
Model Conguration Options
Model Number: MPX - _R_ _____ _____ - _____ _____ - _____ _____ _____ _B_ - _____ - _____ _____ - ______ A B C D E F G H I J K L N
A. Stem Type
□ R 1 in. diameter 316L SS
B. Output
□ 2 Single oat, 4-20 mA (loop powered, 2 wire) □ 3 Dual oat, 4-20 mA (loop powered, 3 wire) □ 4 Modbus RTU, surge/lightning protection, stem RTD
temperature sensor
Note: stem RTDs are located 6” from bottom of probe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ B Large Housing with window
D. Float 1 (Top Float)
□ Z 5.5h x 3d in. Red Polyurethane (0.65 SG) □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ X 5 in. Round 316L SS (0.52 SG) □ W 5 in. Round 316L SS (0.92 SG) □ V 6h x 3d in. Oval 316L SS (0.58 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ T 3 in. Round 316L SS (0.60 SG) □ S 3 in. Round 316L SS (0.94 SG) □ R 5.5h x 2.8d in. Red Polyurethane (0.59 SG) □ P 5.5h x 2.8d in. Blue Polyurethane (0.94 SG) □ M 5.5h x 2d in. Red Polyurethane (0.57 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ N None □ O Other
E. Float 2 (optional)
□ N None □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ W 5 in. Round 316L SS (0.92 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ P 5.5h x 2.8d in. Blue Polyurethane (0.94 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ O Other
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp
(Sizes: 2, 2.5, 3)
□ P NPT Plug 150#
(Sizes: 2, 2.5, 3, 4)
□ N None □ O Other
G. Mounting Size
□ __ See Mounting Type for available sizes
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 48 in. - Max. 378 in.
K. End Plug Options
▲
□ __
1 in. Stem, Standard
□ 2 1 in. Stem, Keyhole for Cotter Pin □ 3 1 in. Stem, 3/8-16 x .6” L Threads
L. Float Stop Options
▲
□ __
1 in. Stem, 316L SS, 1 piece, 1.5 in. OD
□ C 1 in. Stem, 316L SS, 2 piece, 1.75 in. OD □ D 1 in. Stem, Titanium 2, 1 piece, 1.5 in. OD
N. 4-20 Output Set Points
MPX-R2/R3
□ A__ 4mA set point location, in inches from bottom of probe □ B__ 20mA set point location, in inches from top of probe
MPX Accessories
Please order separately, by part number.
▲
This option is standard
Description Part Number
Programming Module
RST-6001 (Modbus: MPX-x4) 125734
RST-4100 (4-20mA: MPX-x2, MPX-x3) 125759
*sold with 6 ft USB cable
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
7
Rev. D, 06/07/2017
APG
MPX-F Specications
Floats Y, Z
5.5”
139.7 mm
Floats W, X
4.76”
120.9 mm
Floats L, M
5.5”
139.7 mm
3.065”
77.85 mm
5.0”
127 mm
2.000”
50.8 mm
MPX-F Floats
Floats U, V
Floats S, T
Floats P, R
139.7 mm
5.88”
150 mm
2.80”
71.12 mm
5.5”
3.03”
76.96 mm
3.08”
78.23 mm
2.800”
50.8 mm
5.70”
144.8 mm
5.00”
127.0 mm
0.27” (x2)
4.25”
108.0 mm
3/4” NPT
7.39”
187.7 mm
Performance
• Resolution: 4-20 mA: 14 bit DAC Modbus: 0.04 in. (1mm)
• Accuracy: ±0.05% of full scale
Programming
• RS-485: optional RST-6001 USB to RS-485 converter
• 4-20 mA: factory set or optional RST-4100 programming module.
Environmental
• Operating Temperature: -40º - 185ºF (-40º - 85ºC)
• NEMA 4X, IP65
Physical
• Housing: Cast aluminium, epoxy coated
• Stem: 7/8” ø Flexible Tubing with Braid, 316L SS
• Stem Length: 10 - 32 ft. (3.05 - 9.75 m)
• Float Sleeve (Floats P & R only):
.035” thick Titanium 2
Electrical
• Electrical Connection: Terminal Block, 12-24 VDC
• Total current draw: 4-20 mA: (single) 22 mA, (dual) 44 mA Modbus (RS-485): 28 mA
Connectivity
• Output:
Single or dual loop-powered 4-20 mA Modbus RTU (RS-485) with Temperature output
Certication
• NEMA 4X, IP65
• CSA:
Class I Division 2 Groups C & D T4 (Ta 85°C)
Class I, Zone 2; AEx nA IIB T4 Ex nA IIB T4
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
8
Rev. D, 06/07/2017
APG
Model Conguration Options
Model Number: MPX - _F_ _____ _____ - _____ _____ - _____ _____ _____ _B_ - _____ - _____ _____ _____ - ______ A B C D E F G H I J K L M N
A. Stem Type
□ F 7/8 in. diameter Flexible Tubing with Braid, 316L SS
G. Mounting Size
□ __ See Mounting Type for available sizes
B. Output
□ 2 Single oat, 4-20 mA (loop powered, 2 wire) □ 3 Dual oat, 4-20 mA (loop powered, 3 wire) □ 4 Modbus RTU, surge/lightning protection, stem RTD
temperature sensor
Note: stem RTDs are located 6” from bottom of probe
C. Housing Type
All Housing Die-cast Aluminum, NEMA 4X, IP68, Blue
▲
□ __
Large Housing
□ B Large Housing with window
D. Float 1 (Top Float)
□ Z 5.5h x 3d in. Red Polyurethane (0.65 SG) □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ X 5 in. Round 316L SS (0.52 SG) □ W 5 in. Round 316L SS (0.92 SG) □ V 6h x 3d in. Oval 316L SS (0.58 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ T 3 in. Round 316L SS (0.60 SG) □ S 3 in. Round 316L SS (0.94 SG) □ R 5.5h x 2.8d in. Red Polyurethane (0.59 SG) □ P 5.5h x 2.8d in. Blue Polyurethane (0.94 SG) □ M 5.5h x 2d in. Red Polyurethane (0.57 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ N None □ O Other
E. Float 2 (optional)
□ N None □ Y 5.5h x 3d in. Blue Polyurethane (0.94 SG) □ W 5 in. Round 316L SS (0.92 SG) □ U 6h x 3d in. Oval 316L SS (0.94 SG) □ P 5.5h x 2.8d in. Blue Polyurethane (0.94 SG) □ L 5.5h x 2d in. Blue Polyurethane (0.94 SG) □ O Other
F. Mounting Type
□ F Flat Face ANSI Flange 150#
(Sizes: 2, 2.5, 3, 4, 5, 6)
□ S Tri Clamp (Sizes: 2, 2.5, 3) □ P NPT Plug 150# (Sizes: 2, 2.5, 3, 4) □ N None □ O Other
H. Mounting Connection
□ W Welded (xed) □ S Slide with Compression Fitting (adjustable)
I. Stem Material
□ B 316L SS
J. Total Stem Length in Inches
□ __ Min. 120 in. - Max. 384 in.
K. End Plug Options
▲
□ __
1 in. Stem, Keyhole Cotter Pin
□ 3 1 in. Stem, 3/8-16 x .6” L Threads
L. Float Stop Options
▲
□ __
1 in. Stem, 316L SS, 1 piece, 1.5 in. OD
□ C 1 in. Stem, 316L SS, 2 piece, 1.75 in. OD □ D 1 in. Stem, Titanium 2, 1 piece, 1.5 in. OD
M. Weights
□ W1 5lb weight, Standard for MPX-F 12 ft or shorter □ W2 10lb weight, Standard for MPX-F longer than 12 ft
N. Temperature Sensor Options
MPX-F4
□ T__ Specify location of stem RTD in inches from bottom of
probe (6” is standard location)
□ 1T_ Digital Temperature Sensor A (no RTD) and location
from bottom of probe in inches
□ 2T_ Digital Temperature Sensors A (no RTD), B and loca-
tions from bottom of probe in inches
□ 3T_ Digital Temperature Sensors A (no RTD), B, C and loca-
tions from bottom of probe in inches
□ 4T_ Digital Temperature Sensors A (no RTD), B, C, D and
locations from bottom of probe in inches
□ 5T_ Digital Temperature Sensors A (no RTD), B, C, D, E and
locations from bottom of probe in inches
N. 4-20 Output Set Points
MPX-F2/F3
□ A__ 4mA set point location, in inches from bottom of probe □ B__ 20mA set point location, in inches from top of probe
▲
This option is standard
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
®
9
Rev. D, 06/07/2017
APG
Tank Cloud
Put Your Tanks In The Cloud
Remote Sensors
Connect to any 4-20mA signal or APG Modbus sensor for constant access to your data. Access up to 10 sensors on a single connection.
Use the Internet Backbone
Connect the APG sensor or module to the Internet via landline, radio, cellular, or satellite.
View Secure Data 24/7
Access sensor data online through our secure portal at levelandflow.com. If the Internet is accessible, so is your information.
Stay Up-To-Date
Program custom alarms - receive email and text (sms) message alerts on your computer, mobile phone, or tablet.
®
EMAIL
TEXT
WEB
The Line-Up:
Online Data Portal
The Tank Cloud data portal, located online at www.levelandflow.com, displays everything you need to know about your measurement.
Here you can:
• View your current and past readings,
• Manage alarms,
• Configure your sensors,
• and Setup user permissions for others in your organization.
Measurements are sorted by location and grouped into sites. Simply select the site you would like to view, and then choose the sensor. Current readings are prominent in the center of the screen.
Contact us today at 888-525-7300 to set-up a demonstration of our sensors and online software. We are excited to show you how it can impact your business.
Automation Products Group, Inc. | 888.525.7300 | sales@apgsensors.com | www.apgsensors.com
Document #9004570; Part #125816-0019 Rev. D, 06/07/2017
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use