APG Hammer Union datasheet

Intrinsically Safe Hammer Union Pressure Transmitter

The Hammer Union Pressure Transmitter is an designed for the rugged environments of land based
and offshore drilling installations including Mud Logging and Measurement while drilling.

Features

• Ranges to 20,000 psi

• 4-20 mA or 0-5 VDC output

• 1502 or 2202 tting

• Exceptional shock and vibration resistance

• ±0.25% accuracy of full scale

• CSA/ATEX/IEC Approved

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]

Hammer Union Specications

*1502 Fing

3.50”

88.9 mm

3.25”

82.5 mm

3.69”

93.7 mm

Performance

• Accuracy (linearity, hysteresis, & repeatability):
±0.25% of full scale (BFSL)

• Standard Pressure Ranges: 0-20,000 psis

• Overpressure - 1.5 times full scale
(applies to sensor only, not tting)

• Burst Pressure - 3 times full scale
(applies to sensor only, not tting)

• Compensated Temp: -40 - 65ºC (-40 - 150ºF)

• Temp Effects on Zero & Span:

±0.026% FSO/ºC (±0.01% FSO/ºF)

• Life: 10 million cycles minimum

• Frequency Response:

Less than 5mS

3.69”

93.7 mm

4 pin Connector

Connectivity

• Output Signal @ 21ºC:
4-20 mA: 3-30 mA max
0-5 VDC: 110 mA inrush current

0-5 VDC: 3.5 mA operating current

Electrical

• Supply Voltage: 10-30 VDC on sensor

• Loop Resistance: 1125 ohms @ 30 VDC decreasing
linearly to 0 ohms @ 10 VDC

• Insulation Resistance: >100 megohms @ 500 VAC,
70ºC

• Shunt Cal: 100% of full scale output

Environmental

• Storage Temp: -50 - 120ºC (-50 - 248ºF)

• Operating Temp: -40 - 85ºC (-40 - 185ºF)

• Enclosure Protection: IP67

Certication

• CSA/cCSAus Contract #237484

• IS: Class 1, Division 1; Groups C & D
Class 1, Zone 0, AEx ia IIB T4
Ex ia IIB T4
Ambient: -40 - 85ºC

• ATEX: 4-20 mA

CE 0344 EX II 1G Ex ia IIB T4 Ga
(Ta = -40°C to +85°C)

• IEC: 4-20 mA

EX ia IIB T4 Ga (Ta= -40°C to +85°C)

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
2

Physical

• Wetted Materials: Conforms to NACE MR-01-75 and
ISO 15156-3 standards

• Incoloy

Options

Part Number: HU - _____ - IS - _____ - PSIS - _____ - _____ - _____
A B C D E

A. Output

□ L24 4-20 mA with Cal Shunt
□ L27 0-5 VDC

B. Pressure Range

□ 5K 0 - 5,000 psis
□ 6K 0 - 6,000 psis
□ 10K 0 - 10,000 psis
□ 15K 0 - 15,000 psis
□ 20K 0 - 20,000 psis

C. Electrical Connection

□ E1 4 pin ‘Mini’
□ E2 5 pin ‘Mini’
□ E3 4 pin Threaded MS3102 (0-5V)
□ E4 6 pin Bayonet (0-5V)
□ E5 1/2 NPT coupling ying leads
□ E6 3 pin Turck Minifast (RSFVL36)
□ E9 3 pin Threaded MS3102 (4-20 mA loop)
□ E10 Junction Box (1502 only)
□ E12 3 pin Bayonet (4-20 mA loop)
□ E13 7 pin Jupiter (4-20 mA loop w/Shunt Cal)
□ E18 4 pin Rota (4-20 mA loop w/Shunt Cal)
□ E20 4 pin Turck minifast (P-RSFV 40-0.3)

D. Fitting

□ P34 Large Hammer Union 1502 Weco tting
□ P35 Small Hammer Union 2202 Weco tting
□ P36 Large Welded Hammer Union 1502 Weco t-

ting

□ P37 Small Welded Hammer Union 2202 Weco t-

ting

E. Enclosure

□ K0 No options (standard)
□ K7 With handle*
□ K1 With protective cage assembly*

*Consult factory

6.75”

171.45 mm

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
3

HU Hammer Union Pressure Transducer

Built for the Toughest Applications

Automation Products Group, Inc. brings you the highest quality hammer union pressure
transducer on the market.

There’s a reason why so many are switching to the HU hammer union pressure transducer
from APG. We always use a NACE compliant nickel alloy and welded construction for the
toughest applications in Oil & Gas drilling and production.

Next time you need a hammer union pressure transducer, call us at [phone].

Optional

Short Lead Times

Halo Cage

As little as 2 weeks

Toughest cage design on the
market

Haz Location
Certifications

Class 1, Division 1; Groups C & D
Class 1, Zone 0
ATEX II 1G Ex ia IIB T4 Ga
IECEx EX ia IIB T4 Ga

Drain Holes

It’s all about the details

NACE Compliant
Nickel Alloy

NACE MR-01-75
ISO 15156-3
We never sacrifice quality

Wide Top Access

Just another way we make it
easy on you

Welded
Construction

Built for high vibration
Field-proven in applications
such as Measurement While
Drilling

1502 &
2202 Fittings

1502 shown, 2202 available

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]
4