APG DST datasheet

DST Ultrasonic Level Sensors

Flexible by Design

The DST series ultrasonic sensors are designed to be used in conjunction with the DCR controllers to

give you a simplied, stand-alone system. The transmit and receive circuit is built into the sensor
and digitally communicates the detected distance to the DCR controller. This allows the sensor to be
separated from the DCR controller by up to 2000 feet with no signal loss. With several sensors to
choose from, there are plenty of options for your application needs.

Features

• AutoSense software provides hassle-free setup

• Internal Temperature Compensation

• Controller and sensor can be separated up to 2000 ft. (650 m)

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]

DST Specications

Performance

• Beam Pattern: 9º off axis

• Internal Temperature Compensation

• Accuracy: ±0.25% of detected range

Connectivity

• Output:

DCR Controller

Certication

DST-1002

• FM Class1, Div 1

Automation Products Group, Inc. www.apgsensors.com
tel. [phone] [e-mail]

2

Electrical

• Wiring Connection: 2 conductor shielded cable

Programming

• Interface with RST-3001/3002 Programmer

(purchase separately)

-The RST-3001 is 32 bit only

-The RST-3002 is 32 and 64 bit compatible

• User selected units of measure

Physical

• PC/PET blend

• Electrostatic

Environmental

• Ratings: NEMA 6P, IP65, NEMA 12

• Operating Temp: -22º - 140ºF (-30º - 60ºC)