Smart-UPS On-Line
Lithium Ion UPS 230V
Single-phase, double conversion online UPS with Li-Ion
batteries and advanced management features
A UPS developed for availability of
your most critical loads under unstable
power conditions worldwide
Smart-UPS" On-Line provides high-density, double-conversion, online power
protection for servers, voice/data networks, medical labs, and light industrial
applications. The Smart-UPS On-Line has a rack/tower convertible chassis.
Lithium Ion batteries allow for greater performance at higher temperatures and
greater overall lifecycle of the UPS. When business-critical systems require
runtime in hours, not minutes , Smart-UPS On-Line can be configured with
multiple Li-Ion battery packs to meet aggressive runtime demands.
The included PowerChute" Business Edition software provides unattended
graceful shutdown of network operating systems . The entire Smart-UPS OnLine family provides value to customers with demanding power conditions,
including a very wide input voltage window, extremely tight output voltage
regulation, frequency regulation, internal bypass, and input power factor
correction.
Total Cost of Ownership decreases up
to 53% when using Smart-UPS On-Line
Li-Ion UPS solutions.
APC Smart-UPS with Lithium-Ion technology enables IT
professionals to operate more effectively and decrease Total Cost
of Ownership (TCO) by minimizing UPS maintenance and offering
remote UPS management across distributed environments.
➢ Greater life expectancy - Increase battery lifecycle 2X
➢ Greater cost savings - Reduce expenses over the lifetime of
the UPS compared to UPSs with lead acid batteries
Eliminate cost of replacing batteries every 3-5 years
Eliminate the labor cost of changing the batteries
Eliminate associated costs of shipping and recycling
old batteries
Increased life cycle asset management
➢ Greater temperature tolerance - Excellent battery
performance at higher ambient temperatures up to 40°C
➢ Greater voltage management of the battery discharge cycle
➢ Greater efficiency in both charge and discharge of the
batteries
➢ Easy installation and handling with lighter external battery
packs
➢ Management options for remote UPS management
Smart-UPS On-Line Li-ion UPS
Industry-leading power factor and Li-ion batteries maximizingUPS density.
Highpowerdensity
More real power in watts, 0.9 pf
High-efficiency "greenmode"
Achieves 98 percent efficiency,
which saves utility and cooling
costs without compromising
performance orreliability.
Graphical LCD display with multicolor
backlight Intuitive interface provides
detailed and accurate information with
ability to configurelocally.
Built-in energy meter
Measures energy use and displays
UPS efficiency in various modes of
operation for easy energy tracking.
Intelligent batterymanagement system
Li-ion battery packs are monitored at
an individual cell level to manage
voltage and temperatures of the set
of cells. This allows for the highest
level of safety with the Li-ion battery
packs. Enhanced battery intelligence
also allows the UPS to automatically
recognize if a battery pack is
installed or other packs are added at
a later date and adjust the runtimes
for the connected load.
Lithium Ion battery pack
Provides long life battery power,
ability to operate at higher
temperatures without degradation of
the performance of the battery. Ability
to add an additional 4 battery packs,
total of 5, to expand runtime.
Operate without battery
Ability to immediately protect equipment
when power returns after a complete
discharge of thebattery.
Five-year warranty on UPS and
battery pack Peace of mind
with a 5 year warranty.
Features
Smart-UPS On-Line Li-Ion UPS
Proven performance with the world's largest installed base of single-phase,
double-conversion products.
Features
Optional network management card
with environmental monitoring
Remote monitoring and control of the
UPS and the environment via Ethernet
connection.
Switched outletgroup(s)
Ability to control a group of output
load receptacles independent from
the main UPS. Enables:
• Rebooting hung device without
cycling the entire UPS
• Sequenced turn ON/OFF
• Shedding of noncritical loads based on
a variety of parameters (battery time,
runtime remaining, and overload)
• Scheduled time OFF to conserve
energy
Emergency poweroff
Remote UPS shutoff in the event of a fire or other
emergency. The UPS can accept normally open
(NO) or normally closed (NC) contacts.
Communication ports
Serial, USB, Ethernet, and
SmartSlot for network accessory
cards.
Communication protocols
Modbus serial, USB
PowerSummary, HTTP, SNMP, and
Telnet.
Flash upgradeable firmware
Allows for field updates of firmware via
communication ports or Network
Management Card (NMC)
Built-in automatic and manual bypass
Ensures seamless power to the load
even in the event of catastrophic UPS
failure.
Smart-UPS On-Line display
Intuitive, easy-to-use LCD provides clear and
accurate information in multiplelanguages.
Features
LCD display screen
Accurately provides real-time status
updates in your choice of basic or
advanced menus.
UPS status(scrolling)
• Output voltage
• Inputvoltage
• Outputfrequency
• Runtime
• Load
• Battery health
Control
• UPS and outlet group settings
• Bypass control
Configuration
• Output voltage, frequency
• Language, brightness, contrast
• Alarm volume
• IPaddress
Test anddiagnostics
• Initiate battery and runtime calibration
tests
About
• UPS serial number, battery part
number
• Battery install and suggested
replacement dates
Backlit screens :
Amber: Indication of
condition that
requires attention
Red: Indication of UPS
alarm that requires
immediate attention
Smart-UPS On-Line Li-Ion
Battery Pack
Long life, lighter weight, higher performance, high density
Features
Longer lifecycle
Double the life expectancy vs. sealed
lead acid batteries
Lighter weight
1/3 lighter than sealed lead acid
battery pack equivalent
High density
1U rack height, allows more extended
run capability is a smaller footprint.
Battery Management System (BMS)
Dedicated monitoring system to
control the energy flow in the battery
pack.
.
Overvoltage and overtemperature
protection at cell level
Provides a higher level of safety
Overload, short circuit
protection, and thermal
runaway protection
Provides a higher level of safety
Dedicated fuse inside of the
battery pack
Provides a higher level of safety
US Certified
UL1973
Cell Certifications
UL1642
IEC62133
UN38.3
5 Year Warranty
Product Family
SKU technical specifications
SRTL1000RMXLI
SRTL1000RMXLI-NC*
SRTL1500RMXLI
SRTL1500RMXLI-NC*
Topology
Double Conversion On-Line
Output
Output Power Capacity
900 Watts / 1000 VA 1350 Watts / 1500 VA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 2% at full load
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz (auto sensing)
Waveform Type
Sine wave
Output Connections
(8) IEC320 C13
Switched outlet Groups
Yes
Efficiency at Full Load
>91% >92%
Input
Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC320 C14
Input voltage range for main operations
160-275V
Batteries & Runtime
Battery Type
Lithium-Ion
Standard Runtime at full load
32min at 900W 19min at 1350W
Replacement Battery
XBP48RM1U-LI (external Li-Ion battery pack)
Communications & Management
Interface Port(s)
Serial (RJ45), Smart-Slot, USB
Available SmartSlot™ Interface Quantity
1
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Yes
*Preinstalled Network Management Card
included with "NC" suffix SKU
Physical
UPS
Net
HxWxD 85mm x 432mm x 587mm 85mm x 432mm x 587mm
Rack Height
2U 2U
Net Weight
13.7kg 13.7kg
Shipping Weight
- 21kg 21kg
Shipping
HxWxD
445mm x 600mm x 850mm 445mm x 600mm x 850mm
Color
Black Black
Lithium Ion External Battery Pack
Net HxWxD
85mm x 432mm x 510mm
Rack Height
1U
Net Weight
12kg
Shipping Weight
-
16.4kg
Shipping HxWxD
200mm x 600mm x 850mm
Environmental
Operating Environment
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-10000 feet (0-3000 meters)
Storage Temperature
-15 to 45 °C (-30 to 70°C without batteries)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-50000 feet (0-15000 meters
Audible noise at 1 meter
from surface of unit
50.0dBA
Online Thermal Dissipation
400 BTU/hr 450 BTU/hr
Conformance
Regulatory Approvals
VDE, EAC, CE, RCM, EN/IEC 62040-1
Standard Warranty
5 years on UPS and
5 years on battery pack
repair or replace
Loading...