APC Back-UPS 9903891A, Back-UPS BR24BPG User Manual

Back-UPS® Pro Battery Pack Installation and Operation
Installation

bu149a
Battery Maintenance and Storage Guidelines

Please follow these Guidelines to get the best performance possible from your UPS.

1. Keep the UPS in a cool location.

2. Turn the UPS OFF when connected equipment is not in use. If the connected equipment will not be used for a long period of time, turn the UPS OFF to preserve the bat tery.
3. Manage UPS Shut down in regions having frequent outages. Promptly save your file s and shut down your computer at the onset of a power outage to preserve battery life and reduce rechar ge time. If the UPS was supplied with a computer cable, you can automate this process by down loading and configuring Power Chute
®
software .
4. Replace the battery after extended storage. If it is not possible to rechar ge the stored UPS battery following 6 months of storage, it is recommended to purchase a genuine APC Replacement Battery Cartridge (APCRBC) to maintain optimal perf ormance of the UPS. Note: AP C's UPS inventory policy is to recharge the UPS before storage causes loss of run time performance.
5. Battery wea r and warranty. Eventually, the battery will become worn from use and require replacement. Normal battery wear is not covered by the Limited Warranty. Contact APC to purchase a genuine APC Replacement Battery Cartridge (APCRBC).
Contact Information

Technical Support http://www.apc.com/support Worldwide +1 800-555-2725

bu0151a
Specifications

Model BR24BPG

Battery Voltage 24 Vdc (nominal) Typical Recharge Time 24 hours

o

Operating Te m p erature 0 Storag e Temperature -5 Operating / Storage

Relative Humidity Size (H x W x D) 30.1 x 1 1.2 x 38.2 cm

Weight 13.4 kg (29.5 lb) Shipping Weight 14.6 kg (32.2 lb)

to 40oC (32o to 104oF)

o
to 45oC (23o to 113oF)

0 to 95% non-condensing

(11 .9 x 4.4 x 15 in)
Limited Warranty
The standard warrant y is three (3) years f rom the date of purchase. (Valid in U.S., Canada, and European Community only. For all other regions, the standard warranty is two (2) years from the date of purchase ). APC’s sta ndard procedure is to replace the original unit with a factory recondition ed unit. Customers who must have the original unit back due to the assig nment of asset tags and set depreciation schedules must declare such a need at first contact with an APC Technical Support representat ive. APC will ship the replacement unit once the defective unit has been rec eived by the repair department, or cross-ship upon the receipt of a valid credit card number. The customer pays for shipping the unit to APC. APC pays ground freight transportation costs to ship the replacement unit to the customer.
Customer support and warranty information is available at the A PC Web sit e, www.apc.com.
© 2010 APC by Schneider Electric. AP C, the APC logo, and Back-UPS are owned by Schne ider Electric Industries S.A. S., American Power Conversion Corporat ion, or their affiliated com panies. All other trademar ks are property of their respective owners.
990-3891A
6/2010
Loading...