Residential Gas Water Heaters
ProMax® is an economical water heater designed for households that need an
exceptional performer that provides long-lasting value.
INTELLIGENT CONTROL LOGIC
The internal microprocessor provides enhanced operating parameters and
tighter differentials for precise sensing and faster heating response to optimize
performance.
SELF-POWERED ELECTRONIC GAS VALVE
Uses a thermopile to genrate the power needed to operate the electronic gas
control without requiring an external power source.
DIAGNOSTICS
The electronic gas control incorporates an LED status indicator that monitors
system operation & service diagnostics.
DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made
from long-lasting PEX cross-linked polymer.
COREGARD™ ANODE ROD
A. O. Smith’s exclusive aluminum anode has a stainless steel core, protects tank
against corrosion.
®
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
DURABLE, TAMPER-RESISTANT BRASS DRAIN VALVE
BLUE DIAMOND® GLASS COATING
Provides superior corrosion resistance compared to industry-standard glass lining.
SERIES 300/301
FLAMMABLE VAPOUR IGNITION RESISTANT COMPLIANT DESIGN
See other side.
8-YEAR LIMITED TANK AND 6-YEAR PARTS WARRANTY
For complete information, consult written warranty or
A. O. Smith Water Products Company.
Page 1 of 2
August 2013
CANRG45551
Residential Gas Water Heaters
SERIES 300/301
CAPACITY & DIMENSIONS
MODEL SERIES
TALL MODELS
GCV 30 300 67 .61 30 35,500 36 61-1/2 58 16 13 8 52 3 or 4 112 —
GCV 40 300 70 .59 40 40,000 41 61-3/4 58-1/4 18 13 8 51-3/4 3 or 4 138 —
GCV 50 300 88 .58 50 40,000 41 60-3/4 57 20 13 8 50-3/4 3 or 4 153 —
SHORT MODELS
GCVL 30 300 60 .61 30 35,500 36 50 46-3/8 18 13-1/2 8 40 3 or 4 112 —
GCVL 40 300 66 .59 40 40,000 41 51-1/2 47-3/4 20 13 8 41 3 or 4 135 —
GCVL 50 100 80 .61 50 40,000 41 53-1/4 48-3/4 24 13-3/8 8 43-1/2 3 or 4 168 √
FIRST HOUR
RATING
GALLONS
ENERGY
FACTOR
GALLON
CAPACITY
BTU INPUT
PER HOUR
NATURAL
RECOVERY
†
90ºF RISE
GALLONS
PER HOUR
DIMENSIONS IN INCHES
A B C D E F
DRAFT
HOOD
OUTLET
APPROXIMATE
SHIPPING
WEIGHT
(LBS)
BC
COMPLIANT
Recovery capacity based on actual performance tests.
Water Connections – 3/4” on all models.
† Propane Gas – 36,000 BTU for 40 gallon models and 32,000 BTU input for 30 gallon models.
Heat Trap Nipples factory-installed on all models.
Flammable Vapour Ignition
Resistant (FVIR) Water Heaters
A. O. Smith FVIR design meets the American National Standards Institute standards
(ANSI Z21.10.1 - CSA 4.1) that deal with the accidental or unintended ignition of
flammable vapours, such as those emitted by gasoline.
Features a sealed combustion chamber with air intake filter and a flame arrestor built
into the water heater base. In addition, a thermal cutoff (TCO) device, is designed
to shut off gas flow to the burner and pilot if poor combustion is detected.
For
ANODE ROD
HOT
CONNECTION
COLD
CONNECTION
E
C
VALV E
A
B
1/2" GAS
CONNECTION
D
F
Maximum Hydrostatic Working Pressure: 150 PSI.
If flammable vapours accidentally enter the
combustion chamber, the arrestor is designed
so flames burn off the top surface and can not
escape down through the arrestor.
For Technical Information, call 1-888-479-8324. A. O. Smith reserves the right to make product changes or improvements without prior notice.
August 2013
A. Industry standard thermopile
B. Large View Port for easy burner inspection
C. 3600 combustion air filter
D. Thermal Cutoff (TCO) with manual reset
www.hotwatercanada.ca
Page 2 of 2
CANRG45551