CPU Support: Intel® Pentium 4 Socket 423 (1.3~1.5GHz)
Front Side Bus (FSB): 400 MHz
Memory Support:
2-Bank PC800 RDRAM
Up to 2GB of PC-600/700 RDRAM
Expansion Slots:
5 x PCI 32-bit/33 MHz
1 x CNR (Communication Network Riser)
1 x AGP Pro (AGP 1X/2X/4X capable)
AGP Data Transfer Rate: Up to 1024MB/sec
Onboard Sound: Creative Labs Sound Blaster PCI128
Onboard LAN: RTL8139
IDE Controller: ARAID.1068u (RAID 0,1 Support)
USB Support: 2 USB ports in addition to the above
Hardware Monitoring: CPU/system fans status, temperature and voltage monitoring
Power Management: Fully ACPI Compliant, CMOS Save, Soft-Off, Suspend to RAM and Suspend to Disk, Wake on Modem.
Additional Features:
Auto-power on when system re-power back
Integrated Super Multi I/O with 2 serial and 2 PS/2 ports
Frequently Asked Questions
Q: What CPU can be used on the AX4T motherboard?
A: This motherboard is designed for use with the Intel® Socket 423 Pentium® 4 processor, supporting a clock speed of between 1.30GHz – 1.50GHz.
Q: How much memory can I use on the AX4T motherboard?
A: The AX4T motherboard only supports up to 2GB of PC-600/700/800 Direct RDRAM.
Q: What about the integrated audio of AX4T? Does it exist?
A: Certainly, the AX4T is equipped with SIGMATEL AC97 CODEC audio on its board.
Q: Is it possible to connect USB devices to this motherboard?
A: Of course, the AX4T includes four USB ports that can be used with USB devices.
Q: Tell me about the power management functions built onto AX4T motherboard.
A: The AX4T supports various power management modes compliant with ACPI including soft-off, suspend to RAM, and suspend to disk.
Q: Do older IDE devices Find support?
A: A yes response will mean that the AX4T motherboard is capable of having an IDE controller integrated that and will support Ultra DMA 33/66/100 modes.
Q: How to go about with the front panel cables connections?
A: The power LED, EMPI, speaker power, and reset switch connectors can be connected to the appropriate pin on the motherboard.
Q: In case a need arises to clear the CMOS, what will happen to a computer?
A: The steps given in the manual can be applied to clear the CMOS in order to bring back the factory defaults.
Q: Is the Wake on LAN Feature Supported by the Motherboard?
A: It is my opinion that, the AX4T motherboard supports Wake on LAN for remote access and support purposes.
User Manual
Loading...
+ 75 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.
Loading...