AOC i2352Ve User Manual

LCD Monitor User Manual

i2352Ve

www.aoc.com

©2011 AOC.All Rights Reserved.

2

Safety ........................................................................................................................................................................ 3

National Conventions ......................................................................................................................................... 3

Power ................................................................................................................................................................ 4

Installation.......................................................................................................................................................... 5

Cleaning............................................................................................................................................................. 6

Other .................................................................................................................................................................. 7

Setup ........................................................................................................................................................................ 8

Contents in Box ................................................................................................................................................. 8

Setup Stand & Base .......................................................................................................................................... 9

Adjusting Viewing Angle ................................................................................................................................... 10

Connecting the Monitor .................................................................................................................................... 11

Wall Mounting .................................................................................................................................................. 12

Adjusting ................................................................................................................................................................. 13

Setting Optimal Resolution .............................................................................................................................. 13

Windows Vista .......................................................................................................................................... 13

Windows XP ............................................................................................................................................. 15

Windows ME/2000 .................................................................................................................................... 16

Hotkeys ............................................................................................................................................................ 17

OSD Setting ..................................................................................................................................................... 18

Luminance ................................................................................................................................................ 18

Image Setup ............................................................................................................................................. 21

Color Setup ............................................................................................................................................... 23

Picture Boost ............................................................................................................................................ 25

OSD Setup ............................................................................................................................................... 27

Extra ......................................................................................................................................................... 29

Exit............................................................................................................................................................ 31

LED Indicator ................................................................................................................................................... 32

Driver ...................................................................................................................................................................... 33

Monitor Driver .................................................................................................................................................. 33

Windows 7 ................................................................................................................................................ 33

Windows Vista .......................................................................................................................................... 37

Windows XP ............................................................................................................................................. 39

Windows 2000 .......................................................................................................................................... 42

Windows ME ............................................................................................................................................. 42

i-Menu .............................................................................................................................................................. 43

e-Saver ............................................................................................................................................................ 44

Screen+ ........................................................................................................................................................... 45

Troubleshoot ........................................................................................................................................................... 46

Specification............................................................................................................................................................ 47

General Specification ....................................................................................................................................... 47

Preset Display Modes ...................................................................................................................................... 48

Pin Assignments .............................................................................................................................................. 49

Plug and Play ................................................................................................................................................... 50

Regulation ............................................................................................................................................................... 51

FCC Notice ...................................................................................................................................................... 51

WEEE Declaration ........................................................................................................................................... 52

Service ....................................................................................................................................................................

Warranty Statement for Europe .......................................................................................................................

Warranty Statement for North & South America (excluding Brazil) ...........................................................

53
53
55

3

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some

warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific

presentation of the warning is mandated by regulatory authority.

4

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure

of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat

the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect

the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

configured receptacles marked between 100 - 240V ~, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for

monitors with power adapter).

5

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on

the stand:

6

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of

strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough

as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

7

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and

contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

8

Setup

Monitor

CD Manual

Monitor Base

Stand

Contents in Box

Power Cable Audio Cable Analog Cable DVI Cable HDMI Cable

Not all signal cables (Analog, DVI, and HDMI cables) will be provided for all countries and regions. Please

check with the local dealer or AOC branch office for confirmation.

9

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

10

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your

own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

You are able to adjust the monitor's angle from -3° to 19 °.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

11

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. Power

2. DVI cable

3. D-Sub cable

To protect equipment, always turn off the PC and LCD monitor before connecting.

1 Connect the power cable to the AC port on the back of the monitor.

2 Connect one end of the 15-pin DVI /D-Sub cable to the back of the monitor and connect the other end to the

computer's DVI /D-Sub port.

3 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer

Troubleshooting.

12

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this

procedure. Follow these steps:

1 Remove the base.

2 Follow the manufacturer's instructions to assemble the wall mounting arm.

3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the

back of the monitor.

4 Insert the 4 screws into the holes and tighten.

5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official

department of AOC.

13

Adjusting

Setting Optimal Resolution

Windows Vista

For Windows Vista:

1 Click START.
2 Click CONTROL PANEL.

3 Click Appearance and Personalization.

4 Click Personalization

14

5 Click Display Settings.

6 Set the resolution SLIDE-BAR to 1920 by 1080.

15

Windows XP

For Windows XP:

1 Click START.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Click Appearance and Themes.

5 Double click DISPLAY.

16

6 Click SETTINGS.

7 Set the resolution SLIDE-BAR to 1920 by 1080.

Windows ME/2000

For Windows ME/2000:

1 Click START.
2 Click SETTINGS.
3 Click CONTROL PANEL.
4 Double click DISPLAY.
5 Click SETTINGS.
6 Set the resolution SLIDE-BAR to 1920 by 1080.

17

Hotkeys

1 Clear vision /-

2 4:3 or Wide/+

3 Source/Auto/Exit

4 Menu/Enter

5 Power

Power

Press the Power button to turn on/off the monitor.

Clear vision / -

1. When there is no OSD, Press the “-” button to activate Clear Vision.

2. Use the “+” or “-” buttons to select between weak, medium, strong, or off settings. Default setting is always

“off ”.

3. Press and hold“-” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision

Demo: on” will be display on the screen for a duration of 5 seconds, press Menu or Exit button, the message

will disappear, Press and hold “-” button for 5 seconds again, Clear Vision Demo will be off.

Clear Vision function will provides the best image viewing experience by converting low resolution and blurry

images into clear and vivid images.

4:3 or Wide/+

When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or

input signal resolution is wide format, the hot key is disable to adjust. )

Auto / Exit / Source hot key

When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure.

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to

select the input source showed in the message bar, press Menu/Enter button to change to the source selected.

18

OSD Setting

Basic and simple instruction on the control keys.

1) Press the MENU-button to activate the OSD window.

2) Press - or + to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it . press - or + to navigate through the sub-menu functions. Once the desired
function is highlighted, press MENU-button to activate it.

3) Press - or + to change the settings of the selected function. Press AUTO to exit. If you want to adjust any

other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor
is off and then press power button to turn the monitor on.

Notes:

1) If the product has only one signal input, the item of "Input Select" is disable to adjust.

2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to

adjust.

3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off

accordingly.

19

Luminance

1. Press MENU (Menu) to display menu.

2. Press

3. Press

- or + to select (Luminance), and press MENU to enter.

- or + to select submenu, and press MENU to enter.

20

4. Press - or + to adjust.

5. Press AUTO to exit.

Brightness 0-100 Backlight Adjustment

Contrast 0-100 Contrast from Digital-register.

Eco mode

Gamma

DCR

Standard

Text

Internet

Game

Movie

Sports

Gamma1 Adjust to Gamma1

Gamma2 Adjust to Gamma 2

Gamma3 Adjust to Gamma 3

Off Disable dynamic contrast ratio

On

Standard Mode

Text Mode

Internet Mode

Game Mode

Movie Mode

Sports Mode

Enable dynamic contrast ratio

21

Image Setup

1. Press MENU (Menu) to display menu.

2. Press

3. Press

- or + to select (Image Setup), and press MENU to enter.

- or + to select submenu, and press MENU to enter.

22

4. Press

5. Press

- or + to adjust.

AUTO to exit.

Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.

Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise

Sharpness 0-100 Adjust picture sharpness

H.Position 0-100 Adjust the horizontal position of the picture.

V.Position 0-100 Adjust the vertical position of the picture.

23

Color Setup

1. Press MENU (Menu) to display menu.

2. Press

3. Press

- or + to select (Color Setup), and press MENU to enter.

- or + to select submenu, and press MENU to enter.

24

4. Press

5. Press AUTO to exit.

- or + to adjust.

Color setup.

DCB Mode

DCB Demo On or off Disable or Enable Demo

Warm Recall Warm Color Temperature from EEPROM.

Normal Recall Normal Color Temperature from EEPROM.

Cool Recall Cool Color Temperature from EEPROM.

sRGB Recall SRGB Color Temperature from EEPROM.

Red Red Gain from Digital-register

User

Full Enhance on or off Disable or Enable Full Enhance Mode

Nature Skin on or off Disable or Enable Nature Skin Mode

Green Field on or off Disable or Enable Green Field Mode

Sky-blue on or off Disable or Enable Sky-blue Mode

AutoDetect on or off Disable or Enable AutoDetect Mode

Green Green Gain Digital-register.

Blue Blue Gain from Digital-register

25

Picture Boost

1. Press MENU (Menu) to display menu.

2. Press

3. Press

- or + to select (Picture Boost), and press MENU to enter.

- or + to select submenu, and press MENU to enter.

26

4. Press

5. Press

- or + to adjust.

AUTO to exit.

Frame Size 14-100 Adjust Frame Size

Brightness 0-100 Adjust Frame Brightness

Contrast 0-100 Adjust Frame Contrast

H. position 0-100 Adjust Frame horizontal Position

V.position 0-100 Adjust Frame vertical Position

Bright Frame on or off Disable or Enable Bright Frame

27

OSD Setup

1. Press MENU (Menu) to display menu.

2. Press - or + to select (OSD Setup), and press MENU to enter.

3. Press - or + to select submenu, and press MENU to enter.

28

4. Press

5. Press AUTO to exit.

- or + to adjust.

H.Position 0-100 Adjust the horizontal position of OSD

V.Position 0-100 Adjust the vertical position of OSD

Timeout 5-120 Adjust the OSD Timeout

Transparence 0-100 Adjust the transparence of OSD

Language Select the OSD language

29

Extra

1. Press

MENU (Menu) to display menu.

2. Press

3. Press - or + to select submenu, and press MENU to enter.

- or + to select (Extra), and press MENU to enter.

30

4. Press

5. Press AUTO to exit.

- or + to adjust.

Input Select Analog Select Analog Sigal Source as Input

Auto Config yes or no Auto adjust the picture to default

Off timer 0-24hrs Select DC off time

Image Ratio wide or 4:3 Select wide or 4:3 format for display

DDC-CI yes or no Turn ON/OFF DDC-CI Support

Reset Yes or no Reset the menu to default

Information Show the information of the main image and sub-image source

31

Exit

1. Press MENU (Menu) to display menu.

2. Press

3. Press AUTO to exit.

- or + to select (Exit), and press MENU to enter.

Exit Exit the main OSD

32

LED Indicator

Status LED Color

Full Power Mode Green or Blue

Active-off Mode Orange or red

33

Driver

Monitor Driver

Windows 7

1.Start Windows® 7

2.Click on the 'Start' button and then click on 'Control Panel'.

3. Click on the 'Display' icon.

34

4.Ckick on the “Change display settings” button.

5.Click the “Advanced Settings” button.

6.

Click the “Monitor” tab and then click the “Properties” button.

35

7.Click the “Driver” tab.

8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then

click the "Browse my computer for driver software" button.

9. Select "Let me pick from a list of device drivers on my computer".

36

10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:

X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.

12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk

drive.

13. Close all open windows and remove the CD.

14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color

Matching Profiles.

37

Windows Vista

1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization".

2. Click "Personalization" and then "Display Settings".

3. Click "Advanced Settings...".

38

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your

monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".

5. Click "Update Driver..." in the "Driver" tab.

6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers

on my computer".

7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive

F:\Driver (CD-ROM Drive).

8. Select your monitor model and click on the 'Next' button.

9. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.

39

Windows XP

1. Start Windows® XP

2. Click on the 'Start' button and then click on 'Control Panel'.

3. Select and click on the category ‘Appearance and Themes’

4. Click on the 'Display' Item.

40

5. Select the 'Settings' tab then click on the 'Advanced' button.

6. Select 'Monitor' tab

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active, click on 'Properties' button.

Please follow the steps below.

7. Click on the 'Driver' tab and then click on 'Update Driver...' button.

41

8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.

9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.

10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:

(CD-ROM Drive).

11. Click on the 'Open' button, then click the 'OK' button.

12. Select your monitor model and click on the 'Next' button.

- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message,

please click on the 'Continue Anyway' button.

13. Click on the 'Finish' button then the 'Close' button.

14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.

42

Windows 2000

1. Start Windows® 2000

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select 'Monitor'

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.

6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.

7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on

'Next' and then click on 'Have disk...'.

8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).

9. Click on the 'Open' button, then click on the 'OK' button.

10. Select your monitor model and click on the 'Next' button.

11. Click on the 'Finish' button then the 'Close' button.

If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.

Windows ME

1. Start Windows® Me

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select the 'Monitor' button, then click on 'Change...' button.

6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.

7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click

on 'Next' and then click on 'Have Disk...'.

8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.

9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.

10. Click on 'Finish' button then the 'Close' button.

43

i-Menu

Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on

screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation

guide.

44

e-Saver

Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown

functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or

Screen Saver); the actual shutdown time depends on your preferences (see example below).

Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to

complete software installation.

Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes) for your

monitor to automatically shutdown. The example above illustrated:

1) The monitor will never shutdown when the PC is powered on.

2) The monitor will automatically shutdown 5 minutes after the PC is powered off.

3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.

4) The monitor will automatically shutdown 20 minutes after the screen saver appears.

You can click “RESET” to set the e-Saver to its default settings like below.

45

Screen+

Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop

into different panes, each pane displays a different window. You only need to drag the window to a corresponding

pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the

installation software to install it.

46

Troubleshoot

your are using.

Problem & Question

Power LED Is Not ON

No images on the screen

Picture Is Fuzzy & Has
Ghosting Shadowing Problem

Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture

Possible Solutions

Make sure the power button is ON and the Power Cord is properly connected
to a grounded power outlet and to the monitor.

Is the power cord connected properly?

Check the power cord connection and power supply.

Is the cable connected correctly?
(Connected using the D-sub cable)
Check the DB-15 cable connection.
(Connected using the DVI cable)
Check the DVI cable connection.
* DVI input is not available on every model.

If the power is on, reboot the computer to see the initial screen (the login
screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.

Can you see "Input Not Supported" on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.

Make sure the AOC Monitor Drivers are installed.

Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back .

Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution

Monitor Is Stuck In Active
Off-Mode"

Missing one of the primary
colors (RED, GREEN, or
BLUE)

Screen image is not centered
or sized properly

Picture has color defects
(white does not look white)

Horizontal or vertical
disturbances on the screen

The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly fitted in its slot.
Make sure the monitor's video cable is properly connected to the computer.
Inspect the monitor's video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on
the keyboard while observing the CAPS LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS LOCK key.

Inspect the monitor's video cable and make sure that no pin is damaged.
Make sure the monitor's video cable is properly connected to the computer.

Adjust H-Position and V-Position or press hot-key (AUTO).

Adjust RGB color or select desired color temperature.

Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and
FOCUS.
Press to auto-adjust.

47

Specification

General Specification

Model name i2352Ve

Driving system TFT Color LCD

Viewable Image Size 58.4cm diagonal

Panel

Resolution

Pixel pitch 0.2652 mm(H) x 0. 2652 mm(V)

Video R, G, B Analog lnterface

Separate Sync. H/V TTL

Display Color 16.7M Colors

Dot Clock 148.5 MHz

Horizontal scan range 30 kHz - 83 kHz

Horizontal scan Size(Maximum) 509.76 mm

Vertical scan range 50 Hz - 76 Hz

Vertical scan Size(Maximum) 286.74 mm

Optimal preset resolution 1920 x 1080 (60 Hz)

Plug & Play VESA DDC2B

Input Connector D-Sub 15 pin, DVI-D

Input Video Signal

Power Source 100-240V~, 50/60Hz

Power Consumption

Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D
Digital Interface

Active < 40 W

Standby < 0.5 W

Physical
Characteristics

Environmental

Off timer 0~24 hrs

Connector Type 15-pin Mini D-Sub , DVI-D

Signal Cable Type Detachable

Height (with base) 398.7 mm

Width 547.8 mm

Dimensions & Weight

Depth 190.0 mm

Weight (monitor only) 3.11 kg

Operating 0° to 40°

Temperature

Non-Operating -25°to 55°

Operating 10% to 85% (non-condensing)

Humidity

Non-Operating 5% to 93% (non-condensing)

Operating 0~ 3658m (0~ 12000 ft )

Altitude

Non-Operating 0~ 12192m (0~ 40000 ft )

48

Preset Display Modes



Standard Resolution

H. Frequency

(kHz)

V. Frequency

(Hz)
VGA 640x480@60Hz 31.469 59.94
VGA 640x480@72Hz 37.861 72.809
VGA 640x480@75Hz 37.5 75

SVGA 800x600@56Hz 35.156 56.25
SVGA 800x600@60Hz 37.879 60.317
SVGA 800x600@72Hz 48.077 72.188
SVGA 800x600@75Hz 46.875 75

XGA 1024x768@60Hz 48.363 60.004
XGA 1024x768@70Hz 56.476 70.069
XGA 1024x768@75Hz 60.023 75.029

SXGA 1280x1024@60Hz 63.981 60.02

SXGA 1280x1024@75Hz 79.976 75.025
WXGA+ 1440x900@60Hz 55.935 59.887
WXGA+ 1440x900@60Hz 55.469 59.901
WSXGA 1680x1050@60Hz 65.29 59.954

HD 1920 x1080@60Hz 67.5 60

*** 1280x720@60Hz 45 60
*** 1280x960@60HZ 60 60

IBM-MODE

DOS

720x400@70Hz 31.469 70.087

MAC

MODE

640x480@67Hz 35 66.667
VGA
MAC

MODE

832x624@75Hz 49.725 74.551
VGA

49

Pin Assignments

Pin Number

15-Pin Side of the Signal Cable

2

Video-Green

4

Ground

5

Detect Cable

7

GND-G

9

+5V

10

Ground

12

DDC-Serial data

14

V-sync

15

DDC-Serial clock

1 Video-Red

3 Video-Blue

6 GND-R

8 GND-B

11 Ground

13 H-sync

Pin No. Signal Name

1. TMDS Data 2- 9. TMDS Data 1- 17. TMDS Data 0-

2. TMDS Data 2+ 10. TMDS Data 1+ 18. TMDS Data 0+

3. TMDS Data 2/4 Shield 11. TMDS Data 1/3 Shield 19. TMDS Data 0/5 Shield

4. TMDS Data 4- / N.C. 12. TMDS Data 3- / N.C. 20. TMDS Data 5- / N.C.

5. TMDS Data 4+ / N.C. 13. TMDS Data 3+ / N.C. 21. TMDS Data 5+ / N.C.

Pin No. Signal Name

Pin No. Signal Name

6. DDC Clock 14. +5V Power 22. TMDS Clock Shield

7. DDC Data 15. DVI Cable Detect 23. TMDS Clock +

8. N.C. 16. Hot Plug Detect 24. TMDS Clock -

50

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the

monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over

the DDC2B channel.

51

Regulation

FCC Notice

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTICE :

The changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this

equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to

correct such interference.

52

WEEE Declaration

Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other

household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic equipment.The separate collection

and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure

that it is recycled in a manner that protects human health and the environment. For more information about where

you can drop off your waste equipment for recycling, please contact your local city office, your household waste

disposal service or the shop where you purchased the product .

53

Service

Warranty Statement for Europe

LIMITED THREE-YEAR WARRANTY*

AOC Color Monitors sold within Europe

AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a

period of Three (3) years after the original date of consumer purchase. During this period, AOC International

(Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a

new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the

property of AOC International (Europe) GmbH.

If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached

to the product.

Deliver the product freight pre-paid, along with the dated proof of purchase, to the AOC Authorized Service Center.

If you cannot deliver the product in person:

Pack it in its original shipping container (or equivalent)

Put the RMA number on the address label

Put the RMA number on the shipping carton

Insure it (or assume the risk of loss/damage during shipment)

Pay all shipping charges

AOC International (Europe) GmbH is responsible neither for any damage or loss during inbound transport damage

nor to inbound product that was not properly packaged.

AOC International (Europe) GmbH will pay the return shipping charges within one of the countries specified within

this warranty statement. AOC International (Europe) GmbH is not responsible for any costs associated with the

transportation of product across international borders. This includes the international border within the European

Union.

* This limited warranty does not cover any losses or damages that occur as a result of

Shipping or improper installation or maintenance

Misuse

Neglect

Any cause other than ordinary commercial or industrial application

Adjustment by non-authorized source

Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center

Improper environment

Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities

This limited warranty does not cover any of the product firmware or hardware that you or any third party have