AOC FT710 User Manual

FT710

17” Flat CRT

User’s
Manual

By Envision Peripherals, Inc.

www.aocmonitor.com

Thank you very much for choosing the AOC Color Monitor. We recommend that you
take a few minutes to read carefully through this brief but comprehensive manual
before installing and switching on the monitor. Please keep this manual in a safe place
for your future reference. Plug & Play Drivers for the AOC Series Monitors are
available at: www.aocmonitor.com

CHECKING THE CONTENTS OF THE MONITOR PACKAGE

The product package should include the following items:

1. Monitor

2. Owner's Manual

3. Power Cord

4. Swivel Base

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC
CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE :

1. The changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.

WARNING :

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the cabinet.
Refer servicing to qualified personnel only.

PRECAUTIONS

z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink,

laundry tub, swimming pool or in a wet basement.

z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it

can injure a person and cause serious damage to the appliance. Use only a cart or
stand recommended by the manufacturer or sold with the monitor. If you mount the
monitor on a wall or shelf, use a mounting kit approved by the manufacturer and
follow the kit instructions.

z Slots and openings in the back and bottom of the cabinet are provided for

ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place the
monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over
a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless
proper ventilation is provided.

z The monitor should be operated only from the type of power source indicated on the

label. If you are not sure of the type of power supplied to your home, consult your
dealer or local power company.

z The monitor is equipped with a three-pronged grounded plug, a plug with a third

(grounding) pin. This plug will fit only into a grounded power outlet as a safety
feature. If your outlet does not accommodate the three-wire plug, have an electrician
install the correct outlet, or use an adapter to ground the appliance safely. Do not
defeat the safety purpose of the grounded plug.

z Unplug the unit during a lightning storm or when it will not be used for long periods

of time. This will protect the monitor from damage due to power surges.

z Do not overload power strips and extension cords. Overloading can result in fire or

electric shock.

z Never push any object into the slot on the monitor cabinet. It could short circuit

parts causing a fire or electric shock. Never spill liquids on the monitor.

z Do not attempt to service the monitor yourself; opening or removing covers can

expose you to dangerous voltages and other hazards. Please refer all servicing to
qualified service personnel.

z To ensure satisfactory operation, use the monitor only with UL listed computers

which have appropriate configured receptacles marked between 100 - 240V AC,
Min. 1.5A.

z The wall socket shall be installed near the equipment and shall be easily accessible.
zAttention: Disconnect the power cord to stop the power supply to the monitor.