Antunes ST36, ST24 User Manual
Standard Features
ST24-SF
Project:
Item #: Qty:
Model #:
Shallow-Well
Slide Top Coolers
ST__ -__
Size:
24 = 24" One Door
36 = 36" One Door
Finish Options:
BG = Black vinyl-clad steel
SFG = Stainless steel front and side
SG = All stainless steel
B = Black vinyl-clad steel
SF = Stainless steel front and sides
S = All stainless steel
AIA#
SIS#
Galvanized Steel Interior with
Stainless Steel Floor
Stainless Steel Interior
• Meets 2008 energy efficiency standards
• Self-contained refrigeration
• Automatic defrost cycle
• Radius interior corners for easy cleaning
• Perfect exterior dimensions: 24″ front to back and 24″ or
36″ left to right
• CFC free foamed-in-place insulation
• Two interior options: galvanized steel walls and stainless
steel floor or all stainless steel
Specications
Electrical
• 120V, 1 phase, 60 Hz, 3.7 full load amps
• Dedicated 15 amp circuit is recommended
• Includes a 6-foot grounded cord & plug which
exists the left rear of the refrigeration compartment
Refrigeration
• 1/8 HP, R134a refrigerant
• Operating range: 30ºF to 40ºF
• Fin & tube evaporator with forced air circulation
Plumbing
• Automatic condensate evaporator. No drain con-
nection required
Partitions
• ST24 includes one vertical wire partition
• ST36 includes two vertical wire partitions
Capacity
• 24″ model = 116 long neck bottles (4.83 cases)
• 36″ model = 174 long neck bottles (7.25 cases)
• Three exterior options: black vinyl-clad steel,
stainless steel front & sides, or all stainless steel
• Six foot grounded cord & plug included (exits left rear)
• 3-3/4″ casters or 6″ legs are available
• Automatic condensate evaporator - no drain connection
required
• One-piece integral top design
• Door lock
Legs
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: top, door, interior
floor, back*, front*, and sides* (*if all stainless finish is
specified)
• 20 gauge black vinyl-clad steel parts include: front and
sides (if black vinyl-clad steel body finish is specified)
• 22 gauge stainless steel parts include: interior walls
(if stainless interior is specified)
• 22 gauge galvanized steel parts include: interior walls (if
galvanized steel interior is specified) and back
• 16 gauge stainless steel parts include: legs*
(* if specified)
• 16 gauge galvanized steel parts include: base
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 02-26-10
4.33
Approval/Notes:
Shallow-Well Slide Top Coolers
Dimensional Information
6' GROUNDED
CORD AND PLUG
HERE
Model A B No. of
Doors
ST24 24″ 20″ 1
ST36 36″ 32″ 1
A
19 1/4"
11 5/16"
12 11/16"
24"
20"
A
COIL
19 3/4"
34 1/2"
24"
PLAN VIEW FRONT ELEVATION
2-1/2"
13"
COIL
22 1/2"
3"
34 1/2"
REFRIGERATION COMPARTMENT
24"
38 1/4"
B
13"
24"
40 1/2"
7/8"
Standard Base
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
9 1/2"
Optional Casters
TYPICAL END VIEWS
3-3/4"
6"
Optional 6" Legs
Printed in USA
Loading...