Antec ATX Power Supply Tester User Manual

ATX Power Supply Tester

PSU ACCESSORIES

Makes testing your ATX power supply a snap

A simple tool for testing ATX12V (v 1.3 and v 2.0) power supplies without fussing with
voltmeters and probes. Simply plug the power supply outputs into the 24-pin (or 20-pin)
connector to verify voltage of each ATX12V rail. Green for normal, yellow for insufficient,
and red for over voltage conditions. Plus a separate Power Good signal for validating whether
power supply as a whole is working or not. Quickly and easily check to see if your power
supply is good or not, saves trouble-shooting time.

Special Features:

• Works with 24-pin and, 20-pin power supplies

• 3-way LED output indicator to clearly show

power supply status

• Power signal indicator for overall power supply status

• Usable with a voltmeter for more accurate readings

• Dimensions: 100mm(L) x 78mm(W) x 27.5mm(H)

• Weight: 0.25 lb/100 g

UCC 13#: 0761345-77203-7

AQ3 — Antec Quality three-year Warranty

www.antec.com 1-800-22ANTEC (US) / [phone] (EU)