Ansmann POWERBANK 12.8 User Manual [ml]

ANSMANN AG MOBILE ENERGIE
POWERBANK 12.8
MANUAL
POWER button
OUTPUT: 5V/max. 2.1A
LCD display
LED Flashight
OUTPUT: 5V/max. 2.1A
INPUT: 5V/2A
Deutsch | English | Français | Español | Português
164mm
65mm
1700-0092
Italiano | Nederlands
DE - VORWORT
Sehr geehrte Kundin, sehr geehrter Kunde, herzlichen Dank, dass sie sich für die ANSMANN POWERBANK ent­schieden haben. Die Bedienungsanleitung hilft Ihnen, die Funktionen Ihres neuen Zusatz-Akkus optimal zu nutzen. Wir wünschen Ihnen viel Freude mit Ihrem neuen Produkt. Ihr ANSMANN Team
SICHERHEITSHINWEISE
Vor Inbetriebnahme Bedienungsanleitung sorgfältig lesen und
Sicherheitshinweise beachten.
Bitte trennen Sie Ihr Gerät von der ANSMANN POWERBANK, wenn
Sie diese nicht verwenden.
Nur geeignet für Geräte mit 5V Eingangsspannung.Um Brandgefahr bzw. die Gefahr eines elektrischen Schlages
auszuschließen, ist die ANSMANN POWERBANK vor Feuchtigkeit und Regen zu schützen!
Das Produkt kann durch Stöße, Schläge oder einen Fall aus
bereits geringer Höhe beschädigt werden. Behandeln Sie das Produkt sorgfältig!
Setzen Sie das Gerät keiner großen Hitze und keiner direkten
Sonneneinstrahlung aus!
Öffnen Sie das Produkt niemals eigenmächtig und führen Sie
Reparaturen nie selbst aus!
Die Produktsicherheit wird durch Umbauen oder Verändern des
Produktes beeinträchtigt. Es besteht Verletzungsgefahr!
Dieses Produkt ist nicht zur Verwendung durch Personen (Kinder
mit eingeschlossen) bestimmt, welche eingeschränkte körper­liche, sensorische oder geistige Fähigkeiten aufweisen bzw. fehlende Erfahrung und Kenntnis im Umgang mit diesem Produkt haben. Solche Personen müssen von einer für ihre Sicherheit verantwortlichen Aufsichtsperson zuerst instruiert oder während der Gerätebedienung beaufsichtigt werden!
Nichtbeachtung der Sicherheitshinweise kann zu Schaden an der
POWERBANK, an angeschlossenen Geräten oder zu gefährlichen Verletzungen von Personen führen!
Wenn Sie Fragen haben, kontaktieren Sie bitte Ihren lokalen
Händler oder unseren Service.
Deutsch | English | Français | Español | Português
Italiano | Nederlands
INBETRIEBNAHME
KAPAZITÄTSANZEIGE
Drücken Sie die Power-Taste, um die verbleibende Energie zu über­prüfen. Die Powerbank verfügt über eine LCD-Anzeige, welche die Kapazität der Powerbank in Prozent (0% - 100%) anzeigt.
> AUFLADEN DER POWERBANK
Stecken Sie den Micro-USB-Stecker des USB-Kabels in die Micro-USB­Buchse der POWERBANK und den USB-Stecker in die USB-Buchse eines Computers oder eines USB-Ladegeräts. Der Ladevorgang startet automatisch. Während des Ladevorgangs blinkt die Anzeige „IN“ und der Ladefortschritt wird in 1% Prozent­schritten angezeigt. Nach vollständiger Ladung erscheint die Anzeige 100%.
> LADEN VON GERÄTEN
Um ein Gerät, wie z.B. ein Smartphone zu laden, verwenden Sie bitte das mitgelieferte USB-Kabel (vorausgesetzt der Micro-USB-Stecker passt in Ihr mobiles Gerät) oder das Original-Ladekabel für Ihr Gerät. Stecken Sie den USB-Stecker des Kabels in die POWERBANK und das andere Ende in Ihr Gerät. Der Ladevorgang startet automatisch. Falls der Ladevorgang nicht automatisch startet, drücken Sie bitte die Power-Taste. Im Display erscheint die Anzeige „OUT“, die Kapazitätsan­zeige in Prozentschritten erlischt ca. 30 Sekunden nachdem das Gerät kontaktiert wurde.
Das gleichzeitige Aufladen mehrerer Endgeräte ist eingeschränkt möglich. Dies ist vom gesamten benötigten Ladestrom abhängig.
Die POWERBANK schaltet nach erfolgreicher Ladung automatisch ab. Bitte trennen Sie nach erfolgtem Ladevorgang Ihr Gerät von der POWERBANK. Bitte beachten Sie, dass die Powerbank nicht gleichzeitig geladen und entladen werden kann.
> LED LEUCHTE
Die LED lässt sich mit einem 2 bis 3 Sekunden langen Tastendruck aktivieren und deaktivieren.
Abhängig vom Lade- / Entl adestrom, kann sich die POWERBANK leicht erwärmen.
TECHNISCHE DATEN
1. Zelltyp: Li-Ion Akkupack
2. Kapazität: 12.000mAh | 44.4Wh
3. Eingang: Micro-USB 5V DC | max. 2000mA
4. Ausgang: 2x USB - 5V DC | max. 2400mA
5. Zubehör: Ladekabel (USB auf Micro-USB)
6. Betriebstemperatur: 0°C bis +45°C
7. Ladezeit: ca. 6 Stunden (abhängig vom Ladestrom)
8. Schutzfunktionen: Überladeschutz, Tiefentladeschutz,
9. Anzeige: LCD-Anzeige
UMWELTHINWEISE
Werfen Sie das Gerät keinesfalls in den normalen Hausmüll. Entsorgen Sie das Gerät über einen zugelassenen Entsorgungsbetrieb oder über Ihre kommunale Entsorgungseinrichtung. Beachten Sie die aktuell geltenden Vorschriften. Setzen Sie sich im Zweifelsfall mit Ihrer Entsorgungseinrichtung in Verbindung. Führen Sie alle Verpackungs­materialien einer umweltgerechten Entsorgung zu.
HAFTUNGSAUSSCHLÜSSE
Die in dieser Bedienungsanleitung enthaltenen Informationen können ohne Vorankündigung geändert werden. ANSMANN übernimmt keine Haftung für direkte, indirekte, zufällige oder sonstige Schäden oder Folgeschäden, die durch unsachgemäße Handhabung oder durch Missachtung der in dieser Bedienungsanleitung enthaltenen Informa­tionen entstehen.
GARANTIEHINWEISE
Auf das Gerät bieten wir eine dreijährige Garantie. Bei Schäden am Ge­rät, die infolge Nichtbeachtung der Bedienungsanleitung entstehen, kann keine Garantie gewährt werden.
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. 10/2017
Ausgang 1 (USB): 5V DC | max. 2100mA Ausgang 2 (USB): 5V DC | max. 2100mA
Überlastschutz, Kurzschlussschutz
GB - FOREWORD
Dear Customer, Many thanks for choosing the ANSMANN POWERBANK. The operating instructions will help you to get the best from the functions of your new external rechargeable battery pack. We hope you enjoy your new product. Your ANSMANN Team
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use and observe
the safety instructions.
Please disconnect your device from the ANSMANN POWERBANK if
you are not using it.
Only suitable for devices with 5V input voltage.In order to prevent any risk of fire or electric shock, the ANSMANN
POWERBANK must be protected from moisture and rain!
The product can be damaged by impacts, shocks or being drop-
ped, even from low heights. Handle the product carefully!
Do not expose the device to intense heat or leave it in direct
sunlight!
Never open the product or attempt to carry out repairs yourself! Product safety is impaired by modifications or alterations to the
product. There is a risk of injury!
This product is not to be used by persons (including children)
who have restricted physical, sensory or mental capabilities or who do not have adequate experience and knowledge in handling this product. Such persons must be instructed beforehand by a supervisory person who is responsible for their safety or must be supervised during the use of the device!
Failure to observe the safety instructions can result in dangerous
injuries to persons or damage to the POWERBANK or the connec­ted devices!
If you have questions, please contact your local dealer or our
service department.
Deut sch | English | Français | Español | Português
Italiano | Nederlands
USE
CAPACITY DISPLAY
Press the power button to check the energy remaining. The Powerbank has an LCD display, which displays the capacity of the Powerbank in percent (0% - 100%).
> CHARGING THE POWERBANK:
Insert the Micro-USB plug of the USB cable into the Micro-USB socket on the POWERBANK and the USB plug into the USB port on a computer or a USB charger. The charge process starts automatically. During the charge process, the “IN” indicator flashes and the charge progress is displayed in 1% percent steps. After the charging is complete, the 100% display appears.
> CHARGING DEVICES:
In order to charge a device, such as a smartphone for example, please use the USB cable supplied (provided that the Micro-USB plug fits your mobile device) or the original charge cable for your device. Insert the USB plug of the cable into the POWERBANK and the other end into your device. The charge process starts automatically. If the charge process does not start automatically, please press the power button. The “OUT” indicator appears in the display and the capacity display in percentage steps disappears ca. 30 seconds after the device is attached.
Simultaneous charging of multiple end-devices is possible with res­trictions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is com­plete. Please disconnect your device from the POWERBANK once the charge process is complete. Please note that the Powerbank cannot be charged and discharged simultaneously.
> LED LAMP
The LED can be activated and deactivated by pressing the button for 2 - 3 seconds.
The POWERBANK may heat up a little depending on the charge/ discharge current.
Deut sch | English | Français | Español | Português
Italiano | Nederlands
TECHNICAL DATA
1. Cell type: Li-Ion rechargeable battery pack
2. Capacity / Energy: 12,000mAh | 44.4Wh
3. Input: Micro-USB 5V DC | max. 2000m
4. Output: 2x USB - 5V DC | max. 2400mA
5. Accessories: Charge cable (USB to Micro-USB)
6. Operating temperature: 0°C to +45°C
7. Charging time: ca. 6 hours
8. Protective functions: Over-charging protection, deep discharge
9. Display: LCD display
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste under any circumstances. Dispose of the device via an authorised disposal centre or your municipal waste disposal facility. Observe the current applicable regulations. Contact your waste disposal facility in the event of any doubt. Dispose of all packaging materials via an environmentally friendly disposal facility.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be changed without prior notification. ANSMANN accepts no liability for direct, indirect, incidental or other damage or consequential damage arising though improper handling or through disregard of the informa­tion contained within these operating instructions.
GUARANTEE INFORMATION
The device has a three-year guarantee. The guarantee does not apply to damage to the device arising through a failure to comply with the operating instructions.
Subject to technical changes. We assume no liability for printing errors. 10/2017
Output 1 (USB): 5V DC | max. 2100mA Output 2 (USB): 5V DC | max. 2100mA
protection, overload protection, short-cir­cuit protection
FR - AVANT-PROPOS
Chère cliente, cher client, Nous vous remercions d‘avoir choisi une BANQUE DE PUISSANCE d‘ANS­MANN. Le présent mode d‘emploi vous aidera à utiliser de manière optimale les fonctions de votre accu supplémentaire. Nous vous souhaitons beaucoup de satisfaction lors de l’utilisation de votre nouveau produit. Votre équipe ANSMANN
CONSIGNES DE SÉCURITÉ
Avant la mise en service, lire soigneusement le mode d‘emploi et
respecter les consignes de sécurité.
Veuillez séparer votre appareil de la BANQUE DE PUISSANCE ANS-
MANN lorsque vous ne l‘utilisez pas.
Convient uniquement aux appareils avec une tension d‘entrée 5V.Afin d‘exclure le risque d‘incendie ou le risque d‘un choc élec-
trique, protéger la BANQUE DE PUISSANCE ANSMANN contre l‘humi­dité et la pluie !
Le produit peut être endommagé par des chocs, des coups ou
une chute, même de faible hauteur. Manipulez le produit avec soin !
N‘exposez pas l‘appareil à une grande chaleur, ni au rayonnement
direct du soleil !
N‘ouvrez jamais le produit de votre propre chef et n‘effectuez
jamais de réparation vous-même !
La sécurité du produit est compromise en cas de transformation
ou de modification du produit. Il existe un risque de blessure !
Ce produit n‘est pas conçu pour une utilisation par des person-
nes (y compris par des enfants) avec des capacités corporelles, sensorielles ou intellectuelles limitées ou avec une absence d‘expérience et de connaissances concernant la manipulation de ce produit. Ces personnes doivent être préalablement instruites par une personne de surveillance responsable de leur sécurité ou doivent être surveillées pendant l‘utilisation de l‘appareil !
Le non respect des consignes de sécurité peut causer des dom-
mages sur la BANQUE DE PUISSANCE, sur les appareils raccordés ou entraîner des blessures graves !
Contactez votre revendeur local ou notre service après-vente en
cas de questions.
Deut sch | Engl ish | Français | Español | Português
Italiano | Nederlands
MISE EN SERVICE
AFFICHAGE DE LA CAPACITÉ
Appuyez sur la touche de mise en marche pour contrôler le niveau d‘énergie restante. La banque de puissance dispose d‘un affichage LCD qui indique la capacité de la banque de puissance en pourcentage (0% - 100%).
> CHARGEMENT DE LA BANQUE DE PUISSANCE
Branchez la fiche micro USB du câble USB dans la prise micro USB de la BANQUE DE PUISSANCE et la fiche USB dans la prise USB d‘un ordinateur ou d‘un chargeur USB. Le processus de charge débute automatiquement. Pendant le processus de chargement, l‘affichage « IN » clignote et la progression est indiqué en incréments de 1%. Une fois le chargement complet, l‘affichage 100% apparaît.
> CHARGEMENT D‘APPAREILS
Pour charger un appareil, par ex. un smartphone, veuillez utiliser le câble USB fourni (à condition que la fiche micro USB passe dans votre appareil mobile) ou le câble de chargement d‘origine de votre appareil. Branchez la fiche USB du câble dans la BANQUE DE PUISSANCE et l‘autre extrémité dans votre appareil. Le processus de charge débute automatiquement. Si le chargement ne démarrage pas automatique­ment, appuyez sur la touche de mise en marche. Sur l‘écran apparaît l‘affichage « OUT », l‘indication de la capacité en incréments de 1% s‘éteint env. 30 secondes après le contact de l‘appareil.
Le chargement simultané de plusieurs périphériques est possible de manière limitée. Cela dépend du courant de charge total requis.
La BANQUE DE PUISSANCE se coupe automatiquement une fois la char­ge correctement terminée. Après le processus de chargement, veuillez séparer votre appareil de la BANQUE DE PUISSANCE. Veuillez noter que la banque de puissance ne peut pas être chargée et déchargée simultanément.
Selon le courant de chargement/de déchargement, le POWERBANK peut légèrement chauffer.
CARACTÉRISTIQUES TECHNIQUES
1. Type d‘accu: bloc d‘accu Li-Ion
2. Capacité / énergie: 12 000mAh | 44,4Wh
3. Entrée: micro USB 5V DC | max. 2000mA
4. Sortie: 2x USB - 5V DC | max. 2400mA
5. Accessoires: câble de chargement (USB sur micro USB)
6. Température de service: 0°C à +45°C
7. Temps de charge: env. 6 heures
8. Fonctions de protection:Protection contre la charge excessive,
9. Affichage: Affichage LCD
REMARQUES CONCERNANT L‘ENVIRONNEMENT
Ne jetez en aucun cas l‘appareil avec les déchets ménagers normaux. Éliminez l‘appareil par le biais d‘une entreprise de traitement certifiée ou de votre déchetterie communale. Respectez les prescriptions actuellement en vigueur. En cas de doute, contactez votre déchetterie locale. Recyclez tous les matériels d‘emballage selon les règles de protection de l’environnement en vigueur.
CLAUSE DE NON-RESPONSABILITÉ
Les informations fournies dans ce mode d‘emploi peuvent être modifiées sans notification préalable. ANSMANN n‘endosse aucune responsabi­lité pour les dommages ou dommages conséquents directs, indirects, accidentels ou autre causés par la manipulation inappropriée ou par le non-respect des informations fournies dans ce mode d‘emploi.
GARANTIE
Nous offrons une garantie de trois ans sur l‘appareil. Aucune garantie n‘est accordée en cas de dommages sur l‘appareil causés par le non respect du mode d‘emploi.
Sous réserve de modifications techniques. Nous n‘endossons aucune responsabilité pour les erreurs d‘impression. 10/2017
Sortie 1 (USB) : 5V DC | max. 2100mA Sortie 2 (USB) : 5V DC | max. 2100mA
contre la décharge profonde, contre la surcharge et contre le court-circuit
ES - PRÓLOGO
Estimada cliente, estimado cliente: Muchas gracias por haberse decidido por el POWERBANK de ANSMANN. Las instrucciones de servicio le ayudarán a emplear idealmente las funciones de su nuevo acumulador adicional. Le deseamos que disfrute de su nuevo producto. Suyo, el equipo de ANSMANN
INDICACIÓN RELATIVA A LA SEGURIDAD
¡Antes de la puesta en funcionamiento, lea a fondo las instrucci-
ones de servicio y las instrucciones de seguridad!
Por favor, separe su dispositivo del ANSMANN POWERBANK cuando
deje de usar éste.
Solo apropiado para aparatos con entrada de tensión de 5V.¡Para descartar el peligro de incendio o el peligro de una electro-
cución, hay que proteger el ANSMANN POWERBANK de la humedad y la lluvia!
El producto podría dañarse por causa de los golpes, percusiones
o caídas (incluso de pequeñas alturas). ¡Maneje el producto con precaución!
¡No exponga el dispositivo a altas temperaturas ni a la radiación
solar directa!
¡No abra el producto por cuenta propia nunca y no lleve Usted
mismo a cabo las reparaciones!
La seguridad del producto queda afectada si lo modifica o remo-
dela. ¡Existiría el peligro de herirse!
Este dispositivo no está destinado a ser utilizado por personas
(incluidos niños) con facultades físicas, sensoriales o mentales disminuidas o que tengan poca experiencia y poco conocimiento en el manejo de este dispositivo. ¡Estas personas deben haber sido instruidas primero por una persona que las supervise y sea responsable de su seguridad o tienen que ser supervisadas durante al manejo del dispositivo!
¡No respetar las instrucciones de seguridad puede producir
daños en el POWERBANK o en los dispositivos a él conectados o lesiones peligrosas en las personas!
Si tiene alguna pregunta que formular, póngase en contacto con
su comerciante local o con nuestro servicio.
Deut sch | Engl ish | Français | Español | Português
Italiano | Nederlands
PUESTA EN SERVICIO
SEÑALIZACIÓN DE LA CAPACIDAD
Pulse la tecla de conexión para comprobar la energía restante. El Powerbank dispone de una señalización LCD que muestra el porcen­taje de la capacidad del Powerbank (0% - 100%).
> CARGA DEL POWERBANK
Inserte el micro-conector USB del cable USB en la micro-toma USB del POWERBANK y el conector USB en la toma USB de un ordenador o de un dispositivo de carga USB. La carga se inicia automáticamente. Durante el proceso de carga parpadea la señalización „IN“ y el estado de carga se muestra porcen­tualmente en pasos del 1%. Tras completarse la carga aparece la señalización „100%“.
> CARGA DE APARATOS
Para cargar un aparato, por ejemplo un smartphone, sírvase del cable USB suministrado (siempre que el micro-conector USB sea apropiado para su aparato móvil) o del cable original de su aparato. Inserte el conector USB del cable en el POWERBANK y el otro extremo en su aparato. La carga se inicia automáticamente. Caso que el proceso de carga no se inicie automáticamente, sírvase pulsar la tecla de conexión. En la pantalla aparece la señalización „OUT“; la señaliza­ción del porcentaje de la capacidad se apaga unos 30 segundos tras contactar con el dispositivo.
La recarga simultánea de varios dispositivos finales solo es posible de modo limitado. Esto mismo depende de la corriente de carga total que se necesite.
POWERBANK se desconecta automáticamente tras haber realizado la carga. Por favor, tras el proceso de carga, separe su aparato del POWERBANK. Por favor, observe que el Powerbank no se puede cargar y descargar simultáneamente.
Dependiendo de las corrientes de carga y descarga, el POWERBANK puede calentarse ligeramente.
DATOS TÉCNICOS
1. Tipo de acumulador: Conjunto de pilas Li-Ion
2. Capacidad / energía: 12.000mAh | 44.4Wh
Deut sch | Engl ish | Français | P усский | Español | Português
Deut sch | Engl ish | Français | Español | Português
Svenska | Italiano | Nederlands | Dansk
Italiano | Nederlands
3. Entrada: USB micro 5V DC | máx. 2000mA
4. Salida: 2x USB - 5V DC | máx. 2400mA
5. Accesorios: Cable de carga (USB a micro USB)
6. Temperatura de servicio: de 0°C a +45°C
7. Duración de carga: aprox. 6 horas
8. Funciones de protección: Protección contra sobrecarga, protec-
9. Señalización: Pantalla LCD
INSTRUCCIONES MEDIOAMBIENTALES
No tire el dispositivo a la basura normal bajo ninguna circunstancia. Elimine el dispositivo como residuo por medio de una empresa de eli­minación de residuos autorizada o a través de su empresa municipal de residuos. Respete las normas actualmente vigentes. En caso de duda, póngase en contacto con su centro de eliminación de residuos. Deseche todos los materiales de embalaje de forma respetuosa con el medio ambiente.
EXCLUSIONES DE RESPONSABILIDAD
Las informaciones contenidas en este manual de instrucciones se pueden modificar sin aviso previo. ANSMANN no acepta ninguna responsabilidad por los daños directos, indirectos, casuales o de otro tipo, ni por los daños resultantes que se originen por una manipula­ción inapropiada o por no tener en cuenta las informaciones conteni­das en estas instrucciones de uso.
INDICACIONES SOBRE LA GARANTÍA
Concedemos una garantía de tres años por el dispositivo. En caso de daños en el dispositivo que se originen por no respetar las instruccio­nes de uso no se puede hacer efectiva ninguna garantía.
Reservado el derecho a introducir cambios técnicos. No aceptamos ninguna responsabilidad por errores de impresión. 10/2017
Salida 1 (USB): 5V DC | máx. 2100mA Salida 2 (USB): 5V DC | máx. 2100mA
ción contra descarga total, protección contra carga excesiva y contra cortocir­cuito
PT - PREFÁCIO
Caro(a) cliente, obrigado pela aquisição de uma POWERBANK ANSMANN. As instruções de operação ajudam-no a aproveitar ao máximo as funções da sua nova bateria adicional. Esperamos que goste de utilizar o seu novo produto. A sua equipa ANSMANN
INDICAÇÕES DE SEGURANÇA
Antes da colocação em funcionamento, ler cuidadosamente as
instruções de operação e respeitar as indicações de segurança.
Desconecte o seu aparelho da POWERBANK ANSMANN, se não
estiver a utilizar o mesmo.
Apenas adequado para aparelhos com tensão de entrada de 5V.Para excluir perigo de incêndio ou de choque elétrico, proteger a
POWERBANK ANSMANN da humidade e da chuva!
O produto pode ser danificado por impactos, choques ou por uma
queda mesmo de uma altura reduzida. Manuseie o produto com cuidado!
Não exponha o aparelho a muito calor nem à luz solar direta!Nunca abra o aparelho sem autorização nem execute reparações
por si próprio!
A segurança do produto é afetada por conversões ou alterações
do produto. Existe perigo de ferimentos!
Este produto não se destina à utilização por pessoas (incluindo
crianças) que apresentem capacidades físicas, sensoriais ou mentais diminuídas ou não possuam experiência e conhecimento relativamente ao manuseamento deste produto. Tais pessoas devem ser, em primeiro lugar, instruídas por um supervisor responsável pela sua segurança e supervisionadas durante a operação do aparelho!
A inobservância das indicações de segurança pode causar
danos na POWERBANK, no aparelho ligado ou ferimentos graves a pessoas!
Se tiver questões, contacte o seu distribuidor local ou o nosso
serviço de assistência.
Deut sch | Engl ish | Français | E spa ñol | Português
Italiano | Nederlands
COLOCAÇÃO EM FUNCIONAMENTO
INDICAÇÃO DE CAPACIDADE
Pressione a tecla Power para verificar a energia restante. A Powerbank dispõe de um visor LCD, o qual indica a capacidade da Powerbank em percentagem (0% - 100%).
> CARREGAR O POWERBANK
Insira a ficha Micro USB do cabo USB na porta Micro USB da POWERBANK e a ficha USB na porta USB de um computador ou de um carregador USB. O processo de carregamento inicia automaticamente. Durante o processamento de carregamento, a indicação „IN“ pisca e o progresso de carregamento é indicado em etapas de percentagem de 1%. A indicação 100% surge após um carregamento completo.
> CARREGAR APARELHOS
Para carregar um aparelho, por ex. um Smartphone, utilize o cabo USB fornecido (desde que a ficha Micro USB seja compatível com o seu equipamento móvel) ou o cabo de carga original para o seu aparelho. Insira a ficha USB do cabo na POWERBANK e a outra extremidade no seu aparelho. O processo de carregamento inicia automaticamen­te. Caso o processo de carregamento não inicie automaticamente, pressionar a tecla Power. No visor aparece a indicação „OUT“, a indicação de capacidade em etapas de percentagem apaga-se aprox. 30 segundos depois do aparelho ter sido conectado.
O carregamento simultâneo de vários terminais é possível de forma limitada. Isto é dependente da corrente de carga total necessária.
A POWERBANK desliga-se automaticamente após um carregamento bem-sucedido. Desconecte o seu aparelho da POWERBANK após um processo de carregamento. Tenha em atenção que a Powerbank não pode ser carregada e descarregada em simultâneo.
Em função da corrente de carga/descarga, o POWERBANK pode aquecer ligeiramente.
DADOS TÉCNICOS
1. Tipo de bateria: Bateria Li-Ion
2. Capacidade / energia: 12.000mAh | 44.4Wh
3. Entrada: Micro-USB 5V DC | máx. 2000mA
4. Saída: 2x USB - 5V DC | máx. 2400mA
5. Acessórios: Cabo de carga (USB e Micro-USB)
6. Temperatura de trabalho: 0°C a +45°C
7. Tempo de carga: aprox. 6 horas
8. Funções de proteção: Proteção contra sobrecarga e descar-
9. Indicação: Visor LCD
INDICAÇÕES RELATIVAS AO MEIO AMBIENTE
Nunca elimine o aparelho junto com o lixo doméstico. Elimine o aparel­ho através de uma empresa de eliminação de resíduos autorizada ou de sistemas públicos de eliminação. Observe as normas em vigor. Em caso de dúvida, contacte a empresa responsável pela eliminação de resíduos. Encaminhe todos os materiais da embalagem para elimi­nação ambientalmente correta.
EXCLUSÃO DA RESPONSABILIDADE
As informações das presentes instruções de operação podem ser alteradas sem aviso prévio. A ANSMANN não assume qualquer res­ponsabilidade por danos diretos, indiretos, acidentais ou outros ou por danos subsequentes decorrentes do manuseamento incorreto ou da inobservância das informações contidas nas presentes instruções de operação.
INDICAÇÃO RELATIVA À GARANTIA
O aparelho tem uma garantia de três anos. A garantia exclui danos no aparelho decorrentes da inobservância das instruções de operação.
Sujeito a alterações técnicas. Não nos responsabilizamos por erros de impressão. 10/2017
Saída 1 (USB): 5V DC | máx. 2100mA Saída 2 (USB): 5V DC | máx. 2100mA
ga total, contra curto-circuito.
IT - PREMESSA
Gentile Cliente, grazie mille per aver scelto un ANSMANN POWERBANK. Le istruzioni per l‘uso vi aiutano a sfruttare al meglio le funzioni della vostra nuova batteria supplementare. Vi auguriamo buon divertimento con il vostro nuovo prodotto. Il vostro team ANSMANN
AVVERTENZE DI SICUREZZA
Prima della messa in funzione, leggere attentamente le istruzioni
per l‘uso e osservare le avvertenze di sicurezza.
Scollegare il dispositivo dall‘ANSMANN POWERBANK se quest‘ulti-
mo non viene utilizzato.
Adatto soltanto per dispositivi con tensione in ingresso di 5V.Per escludere il rischio di incendio o scossa elettrica, proteggere
l‘ANSMANN POWERBANK da umidità e pioggia!
Il prodotto, se subisce colpi, urti o cade a terra anche ad altezze
basse, si può danneggiare. Maneggiare il prodotto con cautela!
Non esporre il dispositivo a temperature elevate né alla luce
solare diretta!
Non aprire mai il prodotto e non effettuare mai riparazioni di
propria iniziativa!
Se al prodotto vengono apportate trasformazioni o modifiche,
la sicurezza dello stesso viene compromessa. Si rischierebbe di ferirsi!
Questo prodotto non è concepito per essere utilizzato diretta-
mente da persone (bambini inclusi) con capacità fisiche, sensori­ali e psichiche limitate e che non posseggano alcuna esperienza e conoscenza sul relativo utilizzo. Queste persone devono essere prima istruite da un addetto alla loro sicurezza o sorvegliate durante l‘uso dell‘apparecchio!
L‘inosservanza delle avvertenze di sicurezza può provocare danni
al POWERBANK e agli apparecchi collegati o gravi lesioni fisiche alle persone!
Per qualsiasi domanda non esitate a contattare il vostro rivendi-
tore locale o il nostro centro di assistenza tecnica.
Deutsch | English | Français | Español | Português
Italiano | Nederlands
MESSA IN FUNZIONE
SPIA CAPACITÀ
Per controllare l‘energia residua, premere il tasto Power. Il Powerbank dispone di un display LCD che visualizza la capacità del Powerbank in valore percentuale (0% - 100%).
> RICARICA DEL POWERBANK
Inserire il connettore Micro-USB del cavo USB nella porta Micro-USB del POWERBANK e il connettore USB nella porta USB di un computer o di un caricabatteria USB. Il processo di ricarica si avvia automaticamente. Durante il processo di ricarica lampeggia l‘indicazione „IN“ e l‘avanzamento della ricarica viene indicato con incrementi dell‘1%. A ricarica completata viene visualizzato 100%.
> RICARICA DEI DISPOSITIVI
Per ricaricare un dispositivo, come ad es. uno smartphone, utilizzare il cavo USB in dotazione (a condizione che il connettore Micro-USB sia compatibile con il dispositivo mobile) o il cavo di ricarica originale del dispositivo. Inserire il connettore USB del cavo nel POWERBANK e l‘altra estremità nel dispositivo. Il processo di ricarica si avvia automati­camente. Se la ricarica non si avvia automaticamente, premere il tasto Power. Sul display viene visualizzato „OUT“ e l‘indicazione della capacità in incrementi percentuali scompare dopo ca. 30 secondi una volta collegato il dispositivo.
La ricarica contemporanea di più terminali è possibile limitatamente. Ciò dipende dalla corrente di carica totale occorrente.
Il POWERBANK si spegne automaticamente una volta completata con successo la ricarica. Al termine della ricarica, scollegare il dispositivo dal POWERBANK. Si osservi che il Powerbank non può essere ricaricato e scaricato contemporaneamente.
Il POWERBANK può leggermente riscaldarsi a seconda della corren­te di carica/scarica.
DATI TECNICI
1. Tipo di batteria: batteria Li-Ion
2. Capacità / energia: 12.000mAh | 44,4Wh
3. Ingresso: Micro-USB 5V DC | max. 2000mA
4. Uscita: 2x USB - 5V DC | max. 2400mA
5. Accessori: cavo di ricarica (da USB a Micro-USB)
6. Temperatura di lavoro: da 0°C a +45°C
7. Tempo di ricarica: ca. 6 ore
8. Funzioni di protezione: protezione da sovraccarica, scarica com-
9. Indicazione: display LCD
NOTA AMBIENTALE
L‘apparecchio non va assolutamente smaltito gettandolo insieme ai normali rifiuti domestici. Consegnarlo invece a un centro di smal­timento autorizzato o all‘ente di smaltimento comunale. Rispettare le disposizioni attualmente in vigore. In caso di dubbi, mettersi in contatto con il proprio ente di smaltimento. Smaltire tutti i materiali di imballaggio nel rispetto dell‘ambiente.
ESCLUSIONE DI RESPONSABILITÀ
Le informazioni contenute nelle presenti istruzioni per l‘uso possono essere modificate senza preavviso. ANSMANN non si assume nessuna responsabilità per danni diretti, indiretti, casuali o di qualsiasi altro genere, riconducibili a un utilizzo scorretto dell‘apparecchio o alla mancata osservanza delle informazioni contenute in queste istruzioni per l‘uso.
INFORMAZIONI SULLA GARANZIA
Per questo apparecchio concediamo 3 anni di garanzia. La garanzia non è valida per qualsiasi danno all‘apparecchio che sia provocato dall‘inosservanza delle istruzioni.
Con riserva di modifiche tecniche. Non ci assumiamo nessuna res­ponsabilità per eventuali errori di stampa. 10/2017
uscita 1 (USB): 5V DC | max. 2100mA uscita 2 (USB): 5V DC | max. 2100mA
pleta, sovraccarico, cortocircuito
Deutsch | English | Français | Español | Português
Italiano | Nederlands
NL - VOORWOORD
Geachte klant, Hartelijk dank dat u hebt gekozen voor een ANSMANN POWERBANK. De gebruiksaanwijzing helpt u om de functies van uw nieuwe extra accu optimaal te benutten. Wij wensen u veel plezier met uw nieuwe product. Uw ANSMANN-team
VEILIGHEIDSINSTRUCTIES
Vóór de ingebruikname zorgvuldig de bedieningshandleiding
lezen en de veiligheidsinstructies in acht nemen.
Koppel uw apparaat van de ANSMANN POWERBANK los, wanneer u
deze niet gebruikt.
Alleen geschikt voor apparaten met 5V ingangsspanning.Om brandgevaar c.q. het gevaar van een elektrische schok uit
te sluiten, moet de ANSMANN POWERBANK tegen vocht en regen beschermd worden!
Het product kan door stoten, schokken of een val van zelfs gerin-
ge hoogte beschadigd worden. Behandel het product met zorg!
Stel het apparaat niet bloot aan grote hitte en directe zonnest-
raling!
Open het product nooit eigenmachtig en voer reparaties nooit
zelf uit!
De productveiligheid wordt door het ombouwen of veranderen
van het product nadelig beïnvloed. Er bestaat gevaar voor ver­wondingen!
Dit product is niet geschikt voor gebruik door personen (met
inbegrip van kinderen) met beperkte lichamelijke, zintuiglijke of mentale vermogens of die te weinig ervaring en kennis hebben wat betreft de omgang met dit product. Dergelijke personen moeten door een voor hun veiligheid verantwoordelijke toezicht­houdende persoon eerst geïnstrueerd of tijdens de bediening van het apparaat in de gaten gehouden worden!
De niet-naleving van de veiligheidsinstructies kan leiden tot
schade aan de POWERBANK, aan aangesloten apparaten of tot gevaarlijk letsel van personen!
Indien u vragen hebt, neem dan contact op met uw plaatselijke
dealer of onze service.
Deutsch | English | Français | Español | Português
Italiano | Nederlands
INGEBRUIKNAME
CAPACITEITSINDICATIE
Druk op de Power-toets om de resterende energie te controleren. De Powerbank beschikt over een LCD-display dat de capaciteit van de Powerbank in procent (0% - 100%) weergeeft.
> DE POWERBANK OPLADEN
Steek de micro-USB-stekker van de USB-kabel in het micro-USB-cont­act van de POWERBANK en de USB-stekker in het USB-contact van een computer of van een USB-lader. De laadprocedure start automatisch. Tijdens de laadprocedure knip­pert de weergave “IN” en wordt de laadtoestand in 1%-procentstap­pen weergegeven. Na volledige lading verschijnt de weergave 100%.
> APPARATEN LADEN
Gebruik de meegeleverde USB-kabel of de originele laadkabel voor uw apparaat om een apparaat zoals bijv. een smartphone te laden (voo­ropgesteld dat de micro-USB-stekker in uw mobiele apparaat past). Steek de USB-stekker van de kabel in de POWERBANK en het andere uiteinde in uw apparaat. De laadprocedure start automatisch. Indien de laadprocedure niet automatisch start, druk dan op de Power-toets. Op het display verschijnt de weergave “OUT”, de capaciteitsindicatie in procentstappen gaat ca. 30 seconden nadat er contact is gemaakt met het apparaat uit.
Het gelijktijdig opladen van meerdere eindapparaten is beperkt moge­lijk. Dit is van de in totaal benodigde laadstroom afhankelijk.
De POWERBANK schakelt na succesvolle lading automatisch uit. Koppel na een succesvolle laadprocedure uw apparaat los van de POWERBANK. Houd er rekening mee dat de Powerbank niet tegelijkertijd geladen en ontladen kan worden.
Afhankelijk van de laad-/ontlaadstroom, kan de POWERBANK lichtelijk warm worden.
TECHNISCHE GEGEVENS
1. Accutype: Li-Ion accupack
2. Capaciteit / energie: 12.000 mAh | 44.4 Wh
3. Ingang: Micro-USB 5V DC | max. 2000 mA
4. Uitgang : 2x USB - 5V DC | max. 2400 mA
5. Toebehoren: Laadkabel (USB op micro-USB)
6. Werktemperatuur: 0°C tot +45°C
7. Oplaadtijd: ca. 6 uur
8. Beveiligingsfuncties: overlaadbeveiliging, onderlaadbeveiliging,
9. Weergave: LCD-display
INSTRUCTIES VOOR HET MILIEU
Gooi het apparaat in geen enkel geval weg met het normale huisvuil. Verwijder het apparaat via een erkend afvalverwerkingsbedrijf of via het afvalbedrjf van uw gemeente. Neem de op dit moment geldende voorschriften in acht. Neem in geval van twijfel contact op met uw afvalbedrijf. Zorg voor een milieuvriendelijke afvoer van alle verpak­kingsmaterialen.
UITSLUITING VAN AANSPRAKELIJKHEID
De in deze gebruiksaanwijzing aanwezige informatie kan zonder aankondiging vooraf gewijzigd worden. ANSMANN aanvaardt geen aansprakelijkheid voor directe, indirecte, toevallige of overige schade of volgschade, die door onvakkundig gebruik of door niet-naleving van de in deze gebruiksaanwijzing aanwezige informatie ontstaat.
GARANTIE
Wij bieden 3 jaar garantie op het apparaat. Bij schade aan het appa­raat, die ten gevolge van niet-naleving van de bedieningshandleiding ontstaat, kan geen garantie verleend worden.
Technische wijzigingen voorbehouden. Voor drukfouten zijn wij niet aansprakelijk. 10/2017
Uitgang 1 (USB): 5V DC | max. 2100 mA Uitgang 2 (USB): 5V DC | max. 2100 mA
overbelastingsbeveiliging, kortsluitingsbe­veiliging
Deutsch | English | Français | Español | Português
Italiano | Nederlands
ANSMANN AG
Industriestrasse 10
97959 Assamstadt
Hotline: +49 (0) 6294 / 4204 3400
E-Mail: hotline@ansmann.de
Germany
Loading...