Page 1
Site Master
MS2712
SiteMaster
SpectrumMaster
CellMaster
S
331D
Site Master
SiteMaster
MS2712
M
S2711D
Spectrum Master
SpectrumMaster
MS2712
M
T8212A
Cell Master
CellMaster
Certified
Line Sweep Training Course
™
Specialized Site Master
™
Line Sweep Training
An intense two-day instructor led training course
that focuses on RF line sweep theory and technology.
n Hands-on: Learn by doing the task and not
by watching. 50% of the course is hands-on.
n Critical Emphasis: Fine tune the points and
techniques that are of particular importance to
your operations. Our skilled instructors and staff
can tailor the module to meet your requirements.
n Cost Savings: Eliminate or significantly reduce
your travel expenses because training sessions
are offered in a location close to you.
Schedule: Training sessions can be easily
scheduled months in advance. Get more
specific details regarding class location, including
information on discounts or having a dedicated
training session at your company site.
n
Contact us directly:
Email us at us-training@anritsu.com
Register on-line at www.us.anritsu.com/training
or contact one of our distributors:
Who Should Attend
Anritsu’s Certified
Line Sweeping Training?
n Wireless Carriers
n Base Station OEMs
n Tower Companies
n Field Engineers
n Installers
n Site Managers
You Will Learn
n Technical aspects of line sweeping
n How to set up a line sweep
n How cable length, cable type, and system
components affect line sweep measurements
n How to use DTF to get accurate and meaningful
distance to fault results
n How to identify, locate, document and
resolve cable line transmission faults
n Hutton Communications,
(877) 648-8866 ext. 0196
www.huttoncom.com
n Primus Electronics,
(800) 435-1636
www.primuselectronics.com
n Talley Communications,
(800) 949-7079
www.talleycom.com
n Tessco,
(800) 472-7373
www.tessco.com
Page 2
Yes! Sign up now for
™
the Site Master
Certified
Line Sweep Training Course...
Site Master
™
Line Sweep
Certification
Everyone who passes the Site
Master Line Sweep Certification
Exam will receive a Site Master
Certificate of Completion, along
with a photo ID card, which demonstrates that you have acquired the
necessary skills and knowledge of
Site Master operation and RF line
sweep training.
The last four hours of the class
are used f
practical exam, and the written
exam. In the hands-on exam,
students will be required to
troubleshoot faults in a given
cable transmission line, and
measure system parameters.
or taking the hands-on
What You Get:
n Course Manual
n Certificate of Completion and
Photo ID Card (upon passing
the exams)
Non-Product
Specific Training
Specialized Site Master Line Sweep
raining discusses the various
T
technologies and methodologies
of line sweeping including FDR.
er
eep
ent
Specialized Site Master Line Sw
raining also discusses the diff
T
types of test equipment that can be
or line sweeping without being
used f
endor specific
v
.
Course Fees (call for pricing):
Two day Specialized Site Master
Line Sweep Course (at a location
near you)
Two day Specialized Site Master
Line Sweep Course (at your location)
Day 1 - Classroom (8.5 hrs):
Lecture 1:
Line Sw
n What is a Line Sweep?
n Understanding Return Loss
and VSWR
n Impedance and Impedance
Matching
n Understanding Insertion Loss
Lecture 2: System Components
and Performance
n Transmission Lines
n Connectors
n Calculating Inser
n Quality of Installation
n Causes of Impedance Mismatch
in
Lecture 3: Line Sweeping
Fundamentals
n Understanding How to Perform
Basic Measurements
n Distance to Fault
n Use of Pr
(Open/Shor
n Important Setup Considerations
Introduction to
eeping
tion Loss
Transmission Line Systems
ecision Components
t/Load)
Lab 1: Basic Setup and
Measurements (Instructor-led)
n Site Master Functions and
Operation
n Calibration
n Performing Return Loss/VSWR
and Insertion Loss
n Distance to Fault Setup
Lab 2: Basic Setup and
Measurements (Self-paced)
n Additional Practice of Basic
Measurements
n Recognizing the Difference
Between Passing and Failing
Systems
n Using Distance to Fault to
Locate Problems
Lecture 4: Trace Interpretation
n Review of the Different Types
of Measurements
n Interpretation of Test Results
Day 2 Morning - Classroom (4 hrs):
Lecture 5:
n Downloading Plots to PC
n Using HHST to Process and
Save Data
Lab 3: Antennna Characterization
Lab 4: Additional Troubleshooting
and System
Day 2 Afternoon:
Hands-on Practical and Written Exams
Cancellation Policy:
Contact Distributors for Policy.
Handheld Software Tools
erification
V
, for the purpose of
er
v
e
w
Ho
consistency for hands-on labs
examinations, only Site Master
and
oducts will be used.
pr
SALES CENTERS:
United States & Canada (800) ANRITSU
America 55 (21) 2527-6922 • Eur
South
Japan 81 (46) 223-1111 • Asia-Pacific (852) 2301-4980
11410-00242,
PN:
Revision F
ope 44 (0) 1582-433433
©Anritsu March 2005. All trademarks are registered trademarks of their respective companies.
Data is subject to change without notice. For more recent specifications visit www.us.anritsu.com.
Discover What’s Possible
®
Loading...