anko WK8359AE User Manual

CORDLESS WATER KETTLE

WK8359AE

USER MANUAL

PLEASE READ AND SAVE THESE

INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

· Please read these instructions carefully before using the

water kettle for the first time.

· This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instructions
concerning use of the appliance by a person responsible
for their safety.

· Children should be supervised to ensure that they do not
play with the appliance.

· If the supply cord is damaged, DO NOT use. For
electrical safety, any repairs to the product should only be
carried out by a qualified electric al person only or the
product must be disposed.

· If the kettle is overfilled, boiling water may be ejected.

· Kettle is only to be used with the base stand provided.

·This appliance is intended to be used in household and

similar applications such as：
– staff kitchen areas in shops, offices and other working
environments;

– farm houses;
– by clients in hotels, motels and other residential type

environments;
– bed and breakfast type environments.

· Do not operate the kettle if damaged.

· Avoid spillage on the electrical connector.

· CAUTION! Heating element and surface are subject to

residual heat after use.

·Use the kettle according to these instructions, any misuse
may cause electric shock or other hazards.

·This appliance is not intended to heat liquids other than
water.

· Regarding how to clean the surfaces in contact food,
please refer to section < Cleaning >.

· Before you connect the kettle to the mains supply, make
sure that the voltage indicated on the rating plate, located
on the bottom of the water kettle matches the mains
voltage in your home. If it does not, do not use the kettle.

· The kettle will switch OFF automatically when the water
has boiled. If you want to stop the heating process before
the kettle automatically switches off, press the ON/OFF
switch up.

· After the kettle has switched OFF automatically (or has
been switched OFF manually) it may need time to cool
down and reset. After 15-20 seconds, the kettle can be

switched ON again.

· Always fill the kettle with cold water before switching it
ON.

· The kettle is designed to disconnect the live electrical
supply from the heating element during abnormal
operating conditions. If the water kettle is accidentally
switched ON without water, it will activate the dry boil
protection circuit in the kettle.

· If the kettle ever boils dry, the power indicator will go out.
Allow 15 minutes to cool down before refilling with cold
water. The safety cutout circuit will automatically reset
during this time.

· Place the kettle on a stable flat surface.

· CAUTION! Do not operate the kettle on an inclined plane.

Do not operate the kettle unless the element is fully
immersed. Do not move while the kettle is switched ON.

· Do not use this appliance outdoors.

· Ensure that the kettle is switched OFF before removing it

from the base.

· Do not remove the kettle from its base during operation.

· Never immerse the kettle or cord in water or any other

liquid. Do not allow liquid to penetrate the electrical parts of
this kettle.