Anko 42976684, 42976691, 42976707 User's Manual

折后尺寸：65*90mm 150g双铜 正反印

90

Earphone TWS

User’s Guide

42976684 White
42976691 Black
42976707 Blush

Earbud Controls

Controls and features are the same for both earbuds.

NOTE: Each earbud must be
powered on separately.

Charger Power & Battery

Indicator LED

Flashing white when case is charging.

Solid white when case is ON.

Individual LEDs show b

Charger DC Power Input (rear)

attery level.

Microphone

Earbud Indicator LED

Red when charging.

White when fully charged.

It goes out in

Function Button

Double - click play, pause, answer, hang u
Reject - three strikes to the right or left
Next Track/ Previous track - three strikes to the
right or left
Siri - Hold down for 2 seconds
Power on - Long press 3 seconds
Power off - Long press 5 seconds

3 Sizes of silicone ear caps

a minute.

Charging the Case

For best results, charge fully before use. Charging time is
approximately 2 hours.

Using a TYPE-C to USB cable, connect to the USB port of a
powered on computer or USB power adaptor (not included)
to charge the case.

p,pick up

Charging the Earbuds

For best results, charge fully before use. Charging time
is approximately 2 hours.

Open the cover and place the earbuds in their docking

stations (note Left and Right placement).

Close the case to ensure the contact between earbuds

and the case.

Use the Power switch on the case to power it ON and

begin charging the earbuds.

• While charging, the indicator on the earbuds will
turn red.

• When charging is complete, the indicator will turn
white. After 1 minutes, the indicator and the case

Linking Earbuds

The earbuds feature automatic linking and will connect to
each other after powering on.

• Take the headset out of the charging case and it will

automatically pair up,The LEDs on both earbuds will

• When successfully linked, a voice will announce the

• When disconnected, follow the below step to re-sync.

1. Turn off your Bluetooth device.

2. Place both anko TWS earphone in your charging
case. Close the lid and wait 30 seconds, then open it.

3. The TWS will auto re-sync the left and right side.

Pairing Bluetooth

Note: You can power on a single earbud to use alone, and
it will function in Mono sound mode.

1. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on the right earbud
will continue ˜ashing white and red, indicating it is ready
to pair to a Bluetooth device.

2. On your Bluetooth device, access Bluetooth Settings and
search for nearby devices. Select
it is discovered. When successfully connected to your
Bluetooth device, a voice prompt will announce the
Bluetooth connection and the LED indicator on both
earbuds will blink white once every 5 seconds.

3. Audio played through the connected Bluetooth device
will now be heard through both earbuds.

when

Audio Functions

• Double - Click play, pause, answer, hang up.

• Reject - Three strikes to the right or left.

• Track selection- Click three times on the left to play the
previous song, and click three times on the right
to play the next song.

• Hold down for 2 seconds to pick up Siri.

• You can also or use the controls on the connected phone
to handle audio functions.

Speakerphone Functions

• Double - Click play, pause, answer, hang up.

• Reject - Three strikes to the right or left.

• You can also or use the controls on the connected phone
to handle phone functions.

Auto-Charge Feature

While the case power is ON:

• Placing the earbuds in the charging case will

• Operating temperature: 0-45°C.

• This BT earbuds shall be charged by the supplied charging

unit only.

• Battery cannot be subjected to high or low extreme
temperatures, low air pressure at high altitude during use,

storage or transportation.

• Replacement of a battery with an incorrect type that can
result in an explosion or the leakage of flammable liquid or

gas.

• Disposal of a battery into fire or a hot oven, or

mechanically crushing or cutting of a battery, that can

result in an explosion.

• Leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion or

the leakage of flammable liquid or gas.

• A battery subjected to extremely low air pressure that may
result in an explosion or the leakage of flammable liquid or

gas.