Anko 42913047 User Manual

User Manual

Bluetooth® FM transmitter & Car charger

42913047

Notice：

Please read user manual carefully before any operations and keep it for your records.

Safety instructions:

Please read all safety instruction warnings carefully before using this product. Improper use of this product may

result in damage to this or attached products. To ensure the production works well, please never use this in the

following conditions:

1. Moist or underwater conditions.

2. Conditions near heater or high temperature service.

3. Conditions with direct and strong sunshine.

4. Do not use chemical solvent on cleaning this product.

Packing contents:

Bluetooth FM Transmitter x 1

3.5mm Audio cable x 1
User manual x 1

Features:

1. Transmit phone call & music from Bluetooth mobile phone to the car FM stereo system

2. Power from the cigarette socket in the car (DC 12V/24V)

3. USB output to charge external devices (DC 5V/1A).

4. Supports USB/TF/AUX-IN;

5. Switch to hands-free mode automatically from music playing status when receiving calls;

6. LCD screen display

7. FM frequency from 88-108.0MHz

8. Bluetooth version: V4.2, Support A2DP, AVRCP, HFP

Function Panels:

Operation Instructions:

Car charger Function

The device has a 5V/1A USB output port that can be used to charge your devices via a USB cable (Not included).

To use Bluetooth, microSD card, USB drive and Aux-in Mode function,
Connect the Bluetooth® FM transmitter to the car radio by FM transmitter.

1. Plug the Bluetooth FM transmitter into your car cigarette socket.

2. Turn your car radio to an unoccupied FM frequency in your area, press the “CH” button and then the LCD
screen flash the frequency, press the previous/next button to match the same radio frequency.

Bluetooth function:

Pairing a Bluetooth device for the first time

1. Turn the unit on.

2. Turn on your external device. Refer to its user manual for instructions on pairing and

connecting Bluetooth devices.

3. Using the native controls on your Bluetooth device, select Bluetooth device name

4. ‘KM42747673” in your Bluetooth settings menu to pair.

5. When successfully paired and connected, a sound will issue from the unit.

6. After initial pairing, the unit will stay paired unless unpaired manually.

7. If your device asks for a pairing password, use “0000” or “1234” to complete the pairing

8. If you have used Bluetooth connection before, the system will start searching for the device last

connected. When the device is found, the system will re-connect automatically.

NOTE: Should your device become unpaired or you are not able to connect it, repeat the above steps.