EU Declaration of Conformity
Name of the Manufacturer
Anker Innovations Limited
Address of the Manufacturer
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
Hong Kong
IEC 62321-1: 2008
EN 300328 V2.2.2
Draft EN 301489-1 V2.2.0
Draft EN 301489-17 V3.2.0
EN 62368-1: 2014+A11:2017
EN 62311 : 2008
EN 55032: 2015
EN 55024: 2010+A1: 2015
2011/65/EU and amendment (EU)2015/863
2014/53/EU
2014/35/EU
2014/30/EU
Version V1.0
We declare under our responsibility that the above referenced product complies with the following recognized directives and
standards, applicable in part or in whole:
I represent and warrant that: (i) I am a designated person of the manufacturer, (ii) I am responsible for the regulatory
compliance of the product (including with the requirements mentioned in Anker Innovations Limited and this Declaration of
Conformity) and (iii) the information I have provided in support of the safety and effectiveness of the product to be true and
accurate and do not contain any material omissions.