Anker Nebula Prizm II, D2240 User Manual

For FAQs and more information, please visit:

www.SeeNebula.com

[e-mail]

[phone] (US) Mon-Fri 9:00 - 17:00 (PT)

[phone] (UK) Mon-Fri 6:00 - 11:00 (GMT)
[phone] (DE) Mo-Fr 6:00 - 11:00
[phone] (

日本) 月-金

9:00-17:00

© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of
Anker Innovations Limited, registered in the
United States and other countries.
Model: D2240

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 1-2 2018\11\8 星期四 15:46:00

51005001300 V01

Nebula Prizm II

User Manual

English

Table of Content

English 01

Deutsch 23

Español 43

Français 63

Italiano 83

日本語

103

123

01  ImportantSafetyInstructions

04  What’sIncluded

04  Overview

06  RemoteControl

07  GettingStarted

12  UsingtheNebulaPrizmII

16  UpgradingtheFirmware

17  Specications

18  Troubleshooting

19  Notice

20  Trademarks

21  Warranty

01

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 3-1 2018\11\8 星期四 15:46:00

English

English

ImportantSafetyInstructions

Read and understand all instructions before you use this device.
Do not change any settings that are not described in this manual.
If physical injury, loss of data, or damage is caused by failure to
follow instructions, the warranty does not apply.

Setup

• To reduce the risk of re and/or electric shock, do not expose

the device to rain or moisture, or objects lled with liquids,

such as vases, should not be placed on the device.

• Do not place the device in areas susceptible to excessive
dust and dirt or near any appliance generating a strong

magnetic eld.

• To prevent overheating, do not block or clog the ventilation
openings.

• Never place the device in a conned space. Always leave
enough space around the device for ventilation.

• Protect the device against direct sunlight, heat, large
temperature fluctuations, and moisture.

• When the device runs for a long period of time and the
surface becomes hot, shut it down and unplug the power
cord. Resume operation only after the device has cooled.

• Always handle the device with care. Avoid touching the lens.

• Never place heavy or sharp objects on the device or the
power cord.

• To avoid electric shock, do not disassemble.

• Only use attachments or accessories specied by the
manufacturer.

• Avoid extreme vibration. It may damage the internal
components.

• Do not allow children to handle the device without supervision.

• Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions: a)
if the device is moved from a cold to a warm area; b) after a
cold room is heated; c) when the device is placed in a damp
room. To avoid any moisture, seal the device in a plastic bag
before moving it to another room, and wait for one to two
hours before you take it out of the bag.

Power Supply

• Power off the device before removing the power supply from
the socket.

• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point

where they exit from this device.

• Unplug this device if there are lightning storms or when
unused for a long period of time.

• Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.

• Before you make or change any connections, ensure that all
devices are disconnected from the power outlet.

• Never touch the power cable or the power connection with
wet hands.

Hearing Safety

• To avoid hearing damage, do not listen for extended periods
at high volume. Set the volume at a safe level.

Cleaning

• Power off the device and remove it from the power supply
before cleaning the surface.

• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers (like sprays, abrasives, polishes, and
alcohol).

02 03

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 2-3 2018\11\8 星期四 15:46:01

English

English

• Do not use any liquid cleaning agents to clean the lens as
they may damage the protective coating on the lens.

• Wipe the surfaces gently. Be careful that you do not scratch
the surfaces.

• Use lens cleaning paper to clean the lens of this projector.

Repairs

• Do not make any repairs to the device yourself. Only have
your device repaired by an authorized service center.

• Improper maintenance can result in injuries or damage to
the device.

• Refer all servicing to qualied service personnel.

Class II equipment symbol

What’sIncluded

Main unit

Remote control

with batteries

This symbol indicates that the unit has a double insulation system.

Power cord Power adapter Manual

Laser Safety

Overview

CLASS 1

LASER PRODUCT

IEC 60825-1:2014. Complies with IEC 62471:2006 Risk Group 2.

Caution

• Possibly hazardous optical radiation emitted from this device.

• Do not stare at the operating beam. The bright light may hurt
your eyes.

04 05

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 4-5 2018\11\8 星期四 15:46:02

1. FrontView

3

1

4

2

5

Speaker / Air ventilation (inlet)

Lens cover
Air ventilation (outlet) button

Lens

• Rotate to adjust focus

English

English

Rear View

4

RemoteControl

1

2

1

IR receiver
Power button
AC-IN

• Connect to power supply

USB

• Connect to a USB storage
device

2. BottomView

3

5 6

HDMI

• Connect to a playback
device with HDMI output

AUDIO OUT

• Connect to headphone or

external speaker

1

2

Flip stand slot
Mounting slot

5

6
7

• Power on / off

• Press to conrm a
selection or entry

• Pause / resume during
play

• Press to display the
keystone correction values.

2

3
4

• Press to access the home
menu

Navigation

buttons

• Navigate menus or adjust
the selected contents

• Return to a previous menu

• Volume up / down

06 07

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 6-7 2018\11\8 星期四 15:46:05

English

English

GettingStarted

1. Placement

Place Nebula Prizm II on a flat, stable foundation squarely in front

of the projection surface. For best results, the projection surface
shall be white and flat. The distance between this projector and the
projection surface must be a minimum of 1 meter (39.4 inches)

and a maximum of 3 meters (118 inches).

1

118”

39.4”

The Nebula Prizm II comes with a flip stand. To use the flip stand:

Press the button.

①

The flip stand pops out.

After use, press the button again, and simultaneously

②

hold the stand to push it back to the slot.

Note: You can also install your projector in the following ways: from
the rear, front ceiling and rear ceiling. Make sure you select the
correct Projection Mode option in this projector’s menu settings.

2. SelectProjectionDistance

The distance between this projector and the projection surface

determines the approximate size of the image. Use the table below
to determine approximately how far to place this projector from the

screen based on the size of the projected image.

Screen size (length × width) Projection distance (m)

50 inches (110 cm × 62 cm) 1.5 m

55 inches (122 cm × 68 cm) 1.63 m

80 inches (177 cm × 100 cm) 2.33 m

100 inches (221 cm × 124 cm ) 2.88 m

120 inches (266 cm × 150 cm ) 3.43 m

08 09

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 8-9 2018\11\8 星期四 15:46:07

English

English

3. CorrectKeystone

It is unnecessary to tilt this projector towards the projection
surface. To correct the keystone:

Press on the remote control to access the home menu,

①

select [Settings] and press .

The Settings menu will show as below.

Manually adjust the keystone values in this projector’s menu

②

settings.

4. PreparetheRemoteControl

The remote control comes with two AAA batteries.

For rst-time use, remove the battery insulation tab to activate

①

the remote control batteries.

To replace the batteries, slide to open the battery compartment,

②

insert new batteries (matching the polarity (+/-) indicated), and

close the battery compartment.

5. PowerOn

Connect this projector to the outlet by using the provided power

①

cord and adapter.

AC-IN

Remove the lens cover.

②

Press the power button on the front panel or on the remote

③

control once.

Turn this projector towards a flat, white projection surface.

④

To focus the image, rotate the lens.

⑤

6. Settings

Go through the setup process when you turn on this projector for

the rst time.

Press on the remote control to access the home menu, select

[Settings] and press .

[Language] Select an on-screen language.
[Image Mode] [Standard] / [Bright]

10 11

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 10-11 2018\11\8 星期四 15:46:08

English

English

[Projection Mode] [Front]: The device is located in front of the

[Vertical Keystone
Correction]

[Horizontal Keystone
Correction]

[Quadrilateral
Keystone Correction]

[U Disk Update] Press Enter to upgrade the rmware

[Restore Factory
Settings]

projection surface.

[Rear]: The device is located behind the
projection surface.

[Front Ceiling]: The device is hanging from
the ceiling in an upside down position. The
image is rotated by 180 degrees.

[Rear Ceiling]: The device is hanging from
the ceiling in an upside down position
behind the projection surface. The image
is rotated by 180 degrees and horizontally
mirrored.

Manual vertical keystone correction. The
default value is 0.

Manual horizontal keystone correction. The
default value is 0.

Manual quadrilateral keystone correction.

The default value is 0.

version.

Reset all the settings. Press Enter to
restore to default settings.

UsingtheNebulaPrizmII

1. PlayfromHDMIPlaybackDevices

This projector can be connected to various HDMI playback devices

such as a TV box, TV stick, DVD player, set-top box (STB), gaming

console or other devices.
To play from HDMI playback devices:

Connect this projector to an HDMI playback device with an

①

HDMI cable (not included).

It will automatically start the HDMI playback when connected to

②

an HDMI playback device for the rst time.

HDMI

2. PlayfromaUSBDrive

With this projector, you can enjoy music, video, and pictures that
are stored on a USB drive.

To play from a USB drive:

Insert a USB drive into the USB socket.

①

12 13

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 12-13 2018\11\8 星期四 15:46:08

English

English

Press to access the home menu, select [File Manager] and

②

press .

Select a le, then press .

③

This projector will play the video or music, or display the photo

you selected.

To stop play, press .

④

USB

Note: Before connecting headphones, turn down the volume to
avoid straining your ears.

4. UseScreenMirroring

You can mirror the screen of your smartphone or tablet onto the
projection surface.

Connect your smartphone or tablet to this projector by using a

①

USB cable (not included).

3. PlayfromExternalDevices

This projector can also be connected to external devices, including

headphones and speakers.

When connected to external speakers, the built-in speaker system

is disabled.

To play from external devices:

Use a 3.5mm audio cable or an adapter (not provided) to connect

①

your headphones or external speakers.

Connect the other end of the cable to the AUDIO OUT port on

②

this projector.

You will hear audio from external devices.

14 15

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 14-15 2018\11\8 星期四 15:46:10

USB

English

English

Press to access the home menu, select [Wire Cast] and

②

press .

Click “Trust this computer” on your device.

③

This projector will mirror the screen of the connected mobile

phone or tablet.

5. ChargeYourDevices

This projector can also be used to charge your USB devices.

UpgradingtheFirmware

To upgrade the rmware:

Download the rmware upgrade software with a USB drive from

①

the Nebula website: SeeNebula.com.

Insert the USB drive into this projector’s USB port.

②

Press to access the home menu, select [Settings] > [U Disk

③

Update].

Press [Enter].

④

The rmware upgrade will automatically begin. Follow the on-

screen instructions to complete the process.

USB

16 17

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 16-17 2018\11\8 星期四 15:46:11

English

English

Specications

Specications and design are subject to change without

notice.

Power supply: AC 110~240V
Power consumption: < 125 W
Display technology: 5 inch LCD 1920 × 1080P
Light source: RGB LED
Projection image size: 40 - 120 inch

Resolution: 1920 x 1080P
Brightness: 200 ANSI / 1000 lumens

Contrast ratio: 1500 : 1
Throw ratio: 1.4
Throw distance: 1m to 3m
Speaker drivers: 5W
Remote control batteries: 2 AAA batteries

Recommended operating temperature: -10°C to 35°C / 14°F to 95°F

Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: -20°C/-4°F ~ 65°C / 149°F,

< 90% humidity

Dimensions (W x H x D): 279 x 265 x 97 mm

Weight: 2420 g

Troubleshooting

Cannot turn on projector with the remote control?

①

• Make sure that this projector is connected to the power
supply.

The remote control doesn’t work?

②

• Make sure the battery is already installed in the remote
control.

• Replace the batteries.

Blurred image?

③

• Press on the remote control to access the home
menu, select [Settings] > [Vertical Keystone Correction] /

[Horizontal Keystone Correction] / [Quadrilateral Keystone
Correction] to adjust the keystone value.

Reversed projection image?

④

• Press to access the home menu, select [Settings] >
[Projection Mode] and switch to a correct state.

Repeatedly reboot?

⑤

• Go to [Settings] > [U Disk Update] to upgrade the rmware
and reboot your projector again.

18 19

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 18-19 2018\11\8 星期四 15:46:11

English

English

Notice

This product complies with the requirements of the

European Community
This product can be used across EU member states.
The following importer is the responsible party (contact for

EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road,

Tyseley, Birmingham, B11 2AA, United Kingdom

This product is designed and manufactured with high

quality materials and components, which can be recycled

and reused.

This symbol means the product must not be discarded as

household waste, and should be delivered to an appropriate

collection facility for recycling. Proper disposal and

recycling helps protect natural resources, human health

and the environment. For more information on disposal and

recycling of this product, contact your local municipality,

disposal service, or the shop where you bought this product.

• Reorient or relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for
help.

Notice: Shielded cables

All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga,

CA, 91730, US
Telephone: [phone]

Trademarks

FCC Notice

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the
following measures:

HDMI, and HDMI logo and High-Denition Multimedia Interface are

trademarks or registered trademarks of HDMI licensing LLC in the
United States and other countries.

20 21

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 20-21 2018\11\8 星期四 15:46:11

Deutsch

English

Warranty

30-Day Money-Back Guarantee for Any Reason

You may return your undamaged product and packaging within 30
days of purchase to receive a FULL REFUND for any reason. If the

reason for return isn’t quality-related, the customer must pay for

the return shipping.

Inhalt

24  Sicherheitsinformationen

27  Lieferumfang

12-Month Warranty for Quality-Related Issues

Nebula’s products are warrantied to be free from material and
workmanship defects for 12 months from the date of purchase.
Within this period, Nebula will provide a replacement and cover any
return shipping costs for products that fail in normal use.

Please Note: Any provided shipping labels must be used within 20
days from the date they’re issued by Nebula Support.

22

27  Übersicht

30  ErsteSchritte

35  VerwendungdesNebulaPrizmII

39  Firmware-Upgrade

40  TechnischeDaten

41  Fehlerbehebung

42  Hinweis

23

51005001300_D2240_INT_Manual_120X140mm_20181106_V01.indd 23 2018\11\8 星期四 15:46:11